Blue Bird Prince 25S ARF - 50.4 Inch Wingspan Almost Ready To Fly R/C
Wood Model Kit, Box Condition: VG++
Sold
High-quality early ARF that assembles in about 2 hours. The fuselage, wings, elevator and rudder are completely built and covered, all to a high standard. Features balsa and ply bulkhead fuselage that is fully wood sheeted then professionally covered with very colorful monokote style plastic as per the cover photo; solid wood vertical stab and rudder covered the same way; stick horizontal stab with thick leading and trailing edges and solid elevator, all covered the same way and a rib and stick wood wing with some wood sheetings, solid wood full length ailerons (all covered like the box top shows) and durable & flexible plastic wing ends. Includes all pushrods and tubes, extensive hardware, completely formed wire spring landing gear, hollow plastic tires and wheels, other wood parts cut to shape, plastic prop, spinner, fuel line and 220 cc plastic fuel tank. There is a very nice instruction book in English with full text and heavily illustrated for all steps. Length is 1030 mm, wingspan 1280 mm, design is for four channels (elevator, rudder, aileron and throttle) and the built built is 1500 to 1600 grams.
Hasegawa Focke-Wulf FW-190 A-8 with Two Eduard PE Sets / Quickboost Exhaust and Gun Barrels Sets / Eduard Mask / True Details Wheels / Kagero Decals / Eagle Spinner and Blades / Eagle A-8 Cockpit Set - (FW190A8), 1/32, ST21
Plastic Model Kit, Box Condition: Good
Sold
Build the ultimate 1/32 '109 A-8! Includes the following extras: Quickboost QB32020 Exahust, QB 32-15 Gun Barrels, Eduard 32-146 PE Set, 32-535 PE Set (both F8 but applicable), Eduard TX010 Mask Set, True Details 32006 Early Wheelset, Kagero FW190 1/32, 1/48 and 1/72 Decals #4, Eagle Parts 46-32 Spinner and Blades and Eagle Parts 51-32 A-8 Resin and PE Cockpit with decals. All those items are complete and never used. There is also 90% of a Lion Roar PE Set. The actual aircraft kit is superbly molded and detailed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram OS2U Kingfisher - RAF / US Navy WWII / Pre-War Yellow Wing Markings - Land Or Seaplane Versions, 1/48, 5304
Plastic Model Kit, Box Condition: Good
Sold
White Box issue from 1977 and an excellent kit for that time. Includes paint guide and markings for the box photo and the silver/yellow wings/blue tail colorful pre-war 'High Visibility' paint. Can be built with wheels or floats. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
ESCI Volvo F12.20 Tractor Plus Container/Trailer - Twin-Axle Flatbed Trailer With 20 Foot Container, 1/32, 303NL
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. Rare.
Dragon MD-83 Reno Air - Die Cast, 1/400, 55488
Metal Model Kit, Box Condition: Good
Sold
Beautiful, factory built, painted and decaled die-cast model with display stand. Never been displayed or used- still sealed in the original box.
Academy Fieseler Fi-156 Storch / MS-500/502 Criquet, 1/72, 1661
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Features recessed panel lines, full interior and engine compartment and optional parts and markings for either version.
Comet Curtiss P-40E Tiger Shark Super Stars Series - 31 inch Wingspan R/C Flying Aircraft, 1/17, 3649
Wood Model Kit, Box Condition: Good-
Sold
Rare. From the early to mid 1970s. Big scale model is designed for R/C operation, gas .020 or .049 control line/free flight, rubber powered or even as a detailed static display model. Box art is by Locher, who did a great deal of the Monogram box artwork also. This is a very nice and well detailed model for that time featuring 'Tube-O-Matic' fuselage construction, 'Rugged Super X Simplified Non-Warping Wing' light-weight plastic spinner, lower fuselage, upper fuselage cowl, exhaust manifolds, wheels, main gear struts, radiator machine gun leading edges and mcuh more, beautiful clear vacuformed canopy (in great condition, not yellowed), completely formed metal gear struts, nose button, hardware, rubber motor, all die-cut balsa wood, factory-cut stripwood and leading & trailing wing edges, covering tissue, big 9" plastic flying prop, very colorful and comprehensive insignia sheet, detailed full size plans with building instructions and more. The model has not been started. The small parts are still in the factory sealed bag and the parts that were never sealed have been inventoried complete with all parts. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
ESCI Mig-27 Flogger D, 1/48, SC-4020
Plastic Model Kit, Box Condition: Good
Sold
NOTE: great builder kit; not collectible because it has been neatly started. Large scale (1/48) Flogger. Features optional position canopy, variable position wings and full underwing stores. NOTE: this kit has minor and neat assembly as follows: floor, seat and instrument panel (with decal) are assembled and painted to 'excellent' quality. This is glued into the front fuselage halves which are also assembled to 'excellent' quality. Wing halves are built to 'professional' quality and the nose wheels are painted to 'very good' quality. There is no other assembly or painting. Inventoried complete including decals and instructions.
Sterling P-47 Thunderbolt With Operating Landing Gear In Flight - 20 Inch Wingspan For R/C / Control Line / Free Flight, A4
Wood Model Kit, Box Condition: Good+
Sold
Very nicely produced stick-and-tissue model that lowers the landing gear before the model lands. Can be flown with rubber, electric or gas control line or converted to RC with modern lightweight systems. Features high quality die-cut balsa sheet parts, stripwood and spars, fully formed wire landing gear struts, finished wheels, other wood and metal stock as required, light plastic full engine cowl, pilot bust and other details, beautiful clear vacuformed one-piece canopy (still mint not yellowed), rubber motor, plastic prop, a big set of full color decals, coving tissue and excellent full size plans with detailed instructions. Never started and complete with the small parts still sealed in the "Sterling" clear bag and all other parts inventoried present. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they had the action features and included everything needed to complete the model.
Aurora Tiger Moth DH-82, 1/48, 110-79
Plastic Model Kit, Box Condition: Mint
Sold
1958 issue in rare, investment-grade 'Mint' condition. The original owner neatly cut the original seal along the bottom and kept it on the box top, thus preserving the factory fresh appearance. A nice kit for that time featuring cockpit with floors, seats, control sticks & instrument panels, clear windshields, rotating prop, pilot figure, clear triangle base display stand and RAF decals. Inside, the kit is like new. It has not been started and even has the original factory tissue paper. With 'excellent' condition decals and instructions.
Balboa Rio Grande Southern (RGS) Galloping Goose Three Truck Freight Brass Locomotive HOn3 Narrow Gauge, 1/87
Metal Model Kit, Box Condition: Good-
Sold
Beautiful, like-new condition brass narrow gauge locomotive, hand-built in Japan by the renown Balboa Scale models. It is still wrapped in the original plastic and all three pieces of the factory foam are intact and in 'excellent+' condition. This model has always been carefully stored in the original box. There is the slightest bit of wheel wear at 14x magnification, so it appears it was test run at one point - probably at Balboa. I see no broken parts and no modifications; it looks factory-new. Also includes the correct fold-out blue Balboa instruction sheet and factory sealed Balboa/Champ decals for the RGS Galloping Goose. The box top and tray are complete but both have wear and stains, so they grade low. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is."
Micro Engineering Co Hay And Grain Store - HO Scale Craftsman, 1/87, 70-600
Multimedia Model Kit, Box Condition: Exc
Sold
Very nice kit made from plastic, wood, cast metal details, separately molded window and door frames and with clear window glazing. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. NOTE: the instructions are very simple text and not illustrated, but there are plenty of photos of the built kit on the internet.
Revell T2-SE (T-2) Oiler Mission Capistrano / Buenaventura / San Fernando / Santa Clara - History Makers Issue, 1/400, 8624
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
Still factory sealed but the seal has split on the right top. 1982 issue from the original 1960s molds. Nicely done military tanker kit with full one-piece hull and very good deck detail. Has decals to make any of the four 'Mission' class T2-SE Oilers listed.
Monogram Firebolt Jet Powered Racer, 1/24, PC51
Plastic Model Kit, Box Condition: Good++
Sold
1997 reissue of the 1959 Four Star model designed for operation by Jetex or CO2 capsules. Molded in bright red, black and clear plastic and includes full decals. Assembly instructions are well illustrated and also include full details on jet power installation. The CO2 cartridge pictured looks just like a modern cartridge, so one of those should work well.
MPC AutoScape Jeep Commando Off Road - With Display Scene Diorama, 1/25, 1-0912
Plastic Model Kit, Box Condition: Good-
Sold
Unique kit includes a vacuform terrain display base, colorful cardboard backdrop of 4WD territory and a nicely detailed Commando kit. The Jeep builds up with a full rolling chassis, just like the real vehicle. Features complete driveline, steering linkage, springs, front and rear differential, shocks, fuel tank, exhaust, detailed complete engine & compartment, opening hood, full interior and rotating wheels. Molded in orange, clear, red tinted clear, and chrome. With real rubber tires. The kit has never been started. Inventoried 100% complete including decals and instructions.
MPC Jeep Trailblazer, 1/25, 1-0852
Plastic Model Kit, Box Condition: Good
Sold
Rare kit of the legendary Jeep. Features full rolling chassis build up like the actual car with detailed suspension, exhaust and four wheel driveline, detailed engine and compartment, opening hood, roll bar, big off-road tires and more. Never started. Inventoried and NOTE: missing the two seats. Otherwise includes all other parts, decals and instructions.
Ideal Aeroplane & Supply Boeing Fighter (F4B-4) - Midget Craft 6 inch wingspan Solid Balsa Airplane Model - (F4B4)
Wood Model Kit, Box Condition: VG
Sold
Very old 1932 issue from Ideal Aeroplane & Supply Company. Ideal was one of the first US model airplane producers, starting their business in 1911. During the early years of the Great Depression, Ideal switched to balsa wood and soon released a line of 'Six Inch Wingspread' solid scale models in a line called 'Ideal Midget-Craft'. Adds for this line can be seen in Model Airplane News and other major popular aircraft publications of the 1930s. The models included plans and the required wood and usually retailed for about 10 cents. This aircraft has been started, which in this case is good news. The fuselage from Ideal was simply wooden stock. The original builder has carved the fuselage very accurately and correctly to about 90% finished. No other work has been done and no other parts have been cut out of the printwood. The model is complete and would be easy to finish.
Jetco Cessna 170 - 36 Inch Wingspan For R/C, S-5
Wood Model Kit, Box Condition: Good
Sold
True scale wooden flying model of this popular and sleek aiplane. Designed for Radio Control but does have provision for free-flight option. Features plastic cowl, die-cut balsa and plywood parts, fully formed light-weight metal gear struts, factory-sealed hardware packet, celluloid die-cut cabin windows, shaped tapered wing edges, covering material, very large decal sheet and instructions with full size plans. Nothing has been punched out and the model is exactly as it left the factory. Never started. Inventoried 100% complete with all parts, decals and instructions. Please NOTE that the decals intact and complete but have age foxing.
Lindberg Ford Crown Victoria Stock or Ohio Sate Highway Patrol Police Car, 1/25, 72713
Plastic Model Kit, Box Condition: Exc
Sold
From 1997. Very nice kit requiring a minimum of painting and can be built as a police car or stock by simply leaving off the police accessories. The body is molded in a stunning high gloss dark gray metallic, the undercarriage in black, interior and interior details in light gray and other parts in clear, red-tinted clear, chrome plated and real rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Monogram Ferrari F40 40th Anniversary Special, 1/12, 2804
Plastic Model Kit, Box Condition: Good-
Sold
Very large scale. Features well detailed engine, drive line & suspension, opening rear deck, full chassis and interior detail and more. Molded in red, black, silver and clear with satin chrome parts. With rubber tires. Never started. All the parts that were factory sealed are still sealed; the parts that were not (chrome only) have been inventoried complete. With instructions and decals. NOTE: the decals are intact but there is damage on the left side of the sheet.