Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa Bell 206 Jetranger (Jet Ranger) Helicopter - Los Angeles Police Department, 1/72, 8

Plastic Model Kit,   Box Condition: VG

$24   

I have listed the scale as 1/72 but am not sure. The rotor span measures 4 7/8 inches. The fuselage, from nose to the tip of the tail is 4.15 inches. Kit features all fine recessed panel lines, some cockpit and cabin detail and Los Angeles Police decals as shown on the box artwork. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Hasegawa Fokker VII B-3M Southern Cross, 1/72, JS034-350

Plastic Model Kit,   Box Condition: Exc+

$48   

Rare Hasegawa-Frog issue. Nicely detailed and molded kit from original late 50s/early 60s molds. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

MPC 1963 Chevrolet Corvette Stingray Split Window Coupe, 1/16, 1-3076

Plastic Model Kit,   Box Condition: Sealed VG

$85   

Sale Pending
Email for availability.

Still factory sealed. 1984 issue. Nicely detailed, large-scale kit. Can be built stock or modified. Molded in black, clear, red-tinted clear, chrome and with rubber tires. Features detailed chassis, opening hood, detailed 327 V8 with Fuel Injection or Tri-Power carbs, working front suspension with metal springs, steerable front wheels, complete interior, optional factory side pipes, custom roll bar and optional decals.

Hasegawa Junkers Ju-87D Stuka With Eagle Strike/ Cutting Edge / (2) Microscale Decal Sheets, 1/32, ST26

Plastic Model Kit,   Box Condition: Exc

$75   

Includes the following 1/32 decal sets in mint, never used condition: Eagle Strike #32024 Achtung Stuka! Part 1, Cutting Edge #CED32.82 Stuka Attack Part 1, Microscale 32-17 Stuka Set #1 and Microscale #32-18 Stuka Set #2. The actual model is finely molded and highly detailed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Bandai Sturmgeschutz III Ausf. G 75mm Assault Gun or 105mm Howitzer, 1/48, 8266

Plastic Model Kit,   Box Condition: Sealed Exc++

$55   

Still factory sealed. Rare kit that is part of the classic and highly detailed 1/48 Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be posed in almost any position.

Bandai Maultier Opel Sd. Kfz.4, 1/48, 8226-250

Plastic Model Kit,   Box Condition: Sealed Exc+

$44   

Still factory sealed. Rare early version with swastika on the box top and short sides. Excellent kit that is part of the classic and highly detailed 1/48 Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be posed in almost any position.

Eduard Albatros D-III Profipack, 1/48, 8035

Multimedia Model Kit,   Box Condition: Good

$32   

Highly detailed kit with main injection molded parts, numerous photoetched details, resin details, realistically thin windscreen and painting guide and decals for four colorful aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

UPC B-29 Superfortress - (ex-Marusan), 1/101, 5067-100

Plastic Model Kit,   Box Condition: VG+

$28   

From about 1965 and issued with original Marusan molds. This is a nice model featuring moving control surfaces, rotating props and wheels, cockpit detail, crew, full landing gear and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.

Revell Boeing E-3A AWACS Sentry - USAF or NATO, 1/139, 4422

Plastic Model Kit,   Box Condition: Sealed NM

$24   

Still factory sealed. 1982 issue. Very close to 1/144 scale. This is Revell's classic 707 modified into the airborne command post. Features optional position landing gear and decals for USA or NATO.

Revell LTV A-7D Corsair II - Strategic Airpower Issue, 1/72, H133-100

Plastic Model Kit,   Box Condition: Exc++

$26   

1968 release with the -100 price extension. In 1969, Revell dropped the price extension on this kit. Nicely molded and detailed kit for the time. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

Revell F-18A (F/A-18) Hornet Prototype, 1/48, 4500

Plastic Model Kit,   Box Condition: Exc

$26   

1979 first issue for the 1/48 scale version. Features full cockpit, AIM-9 Sidewinder and AIM-7 Sparrow missiles, very fine raised and recessed details and Navy Prototype decals. The model has never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.

Monogram Cylon Raider from Battlestar Galactica, 1/48, 6026

Plastic Model Kit,   Box Condition: Exc++

$49   

Original release from 1978 with an excellent condition box top. Color and gloss are like new. Very finely molded and detailed kit with traditional high Monogram quality. The model as never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.

ESCI Douglas DC-3 - TWA NC49551 or Sabena, 1/72, 8246

Plastic Model Kit,   Box Condition: Sealed VG+

$38   

Still factory sealed. Very nicely molded kit with great detail. Features all fine recessed panel lines, complete cockpit and full passenger interior, optional position fuselage doors, detailed engines and landing gear, optional position wing flaps, parts for A or B variants and decals for both aircraft including extensive TWA striping.

Hasegawa F-100 Thunderbirds Super Sabre, 1/72, 121

Plastic Model Kit,   Box Condition: VG++

$28   

From the late 1970s/early 1980s and well detailed & molded for that time. Features a very large and complete Thunderbirds decal sheet. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Decals look 'excellent+.'

Hawk Republic F-84 Thunderjet - One-Piece Box Issue, 1/48, 701

Plastic Model Kit,   Box Condition: Exc+++

$89   

Rare early first issue Hawk kit in the flip-top box from 1949. (Please see the article about early USA plastic kit development on this site.) The kit is in fantastic collector condition inside and out. The kit is molded in the correct light gloss gray with the early style stand and correct instructions. Please note that Hawk did not issue decals with this early first issue. The instructions make it clear how to paint the markings, which are raised on the moldings. Never started. Inventoried 100% complete with all parts and instructions. Hawk was a manufacturer of 1/48 constant scale solid wooden models back in the 1920s (well before plastic), but they jumped on the plastic band wagon very early. Most of the first issue 'flip box' plastic kits were 1/48, such as this kit.

Heller North American T-28 Trojan/Fennec - EALA 2/72 Algeria 1960 or 1st Air Commando South Vietnamese Air Force, 1/72, 279

Plastic Model Kit,   Box Condition: VG

$22   

1970s Heller issue with 'Black Box' design that has black background on the box top and all 4 sides. Includes markings for both aircraft. The kit has never been started. Inventoried 100% complete including decals and instructions.

Monogram Stinger Rear Engine Rail Dragster, 1/24, 2809

Plastic Model Kit,   Box Condition: Sealed Exc++

$18   

Still factory sealed. 1995 reissue of the original 1975 kit. Unique Tom Daniel designed rail dragster. Body lifts off to show detailed chassis.

Revell M*A*S*H 4077th Swamp Scene (MASH 4077) With Jeep / Tent / Figures, 1/35, 4335

Plastic Model Kit,   Box Condition: Sealed Exc

$69   

Still factory sealed. 1994 issue based on the very popular TV show. Builds a complete diorama with everything shown on the box art. Large 1/35 scale kit features jeep, Radar and his teddy bear, 'Hot Lips' and Hawkeye, detailed base, tent and road sign post with signs.

Hawk Lockheed Constellation L-749 - One Piece 1948 Box Issue, 1/140, 702

Plastic Model Kit,   Box Condition: VG++

$175   

Very rare. This kit is from 1949, and even predates the Gowland & Gowland 'Highway Pioneers' that started the plastic model craze in the United States. Hawk was a producer of wooden kits (with with metal details) before and after WWII, and was one of the handful of manufacturers to produce such kits (known as 'solids') in a consistent 1/48 scale. Hawk made aircraft, ship and train models in this fashion. The very first injection molded aircraft kits in the United States were made by Varney or Hawk in 1946, but they did not catch on quickly. Hawk was always an innovative and quality-driven company, and they took a gamble on injection molded kit well before they were popular. As early as 1946 they issued the 1/48 Curtiss R3C-1 with wheels. Like Varney's Fleet Sub and PT-17, they were shunned by hobby dealers. Hawk persisted with the 'Evolution of the Jet' gift set in 1948 and issued several kits - the Supermarine S6B, Gee-Bee, Howard Ike, Laird (all in acetate) and the F-84G and this Constellation (both in polystyrene). All were in the two-tone one-piece box. This model is molded in the correct glossy medium gray with a unique early stand. The model was issued with instructions but did not come with decals. The instructions tell you that '...the plane is molded in the proper base color, and if you intend to paint your favorite air-line markings be sure to use good enamel (not lacquer). The kit has never been started. The contents are either in the factory sealed bag or have been inventoried 100% complete with all parts and instructions.

Guillows Douglas A-1H Skyraider - 16 inch Wingspan Rubber Powered Flying Model, 904-130

Wood Model Kit,   Box Condition: Exc

$18   

Roughly 1980s scale stick and tissue rubber powered flying model. Includes die cut balsa parts, vacuform nose/spinner, wheels, metal landing gear, plastic propeller, hardware, vacuform canopy, colored tissue, insignia and full size plans with detailed building instructions. The model has not been started. Inventoried 100% complete with all parts and instructions. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2014.