Unicraft Bisnovat Samolyot 5-2 - Soviet Skyrocket Bisnovat 5, 1/72
Resin Model Kit, Box Condition: Sealed NM
$32
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit. The Samolyot 5-2 (or Bisnovat 5) was a Russian manned rocketplane. Bisnovat was assigned the project to develop an all-Soviet equivalent to the 346 supersonic rocketplane being developed by the German Roessing team in OKB-2.Status: canceled 1949. Thrust: 19.60 kN (4,406 lbf). Gross mass: 3,400 kg (7,400 lb). Unfueled weight: 1,900 kg (4,100 lb). Height: 9.92 m (32.54 ft). Span: 6.60 m (21.60 ft).Like the 346, the 5 was a swept-wing aircraft, but about 2/3 the size. First glide flight by A K Pakhomov, dropped from a Pe-8, came on 14 July 1948. The first 5-1 aircraft was destroyed on its third flight 5 September 1948. The 5-2 second aircraft, with RD-2M3BF rocket engine installed, made its first flight on 26 January 1949. After five unpowered flights, the program was cancelled in June 1949. By that time better-funded turbojet-powered fighter prototypes were already achieving the 1200 km/hr top speed of the 5. Biesnovat and Isayev would elaborate the design in unmanned form into the supersonic R-1 air-to-surface missile.
Unicraft Me-262 HG.III/3, 1/72
Resin Model Kit, Box Condition: Sealed NM
$59
Still factory tape sealed. Very rare model of this advanced German Me-262 variant. Nicely detailed, limited-run resin kit.
Airfix RAF Rescue Launch - 63 Ft British Power Boat Type 2 'Whaleback', 1/72, 05281-2
Plastic Model Kit, Box Condition: Exc
$52
From 1978 and the first issue. Very nicely detailed, large-scale, full-hull model features details for optional configurations, color schemes and decals. Never started. It has been inventoried complete with all parts and includes decals and instructions.
MPC Dodge D-50 Pickup Truck, 1/25, 1-0753
Plastic Model Kit, Box Condition: Sealed VG+
$49
Still factory sealed. Dated 1980. Can be built stock or custom with many optional parts such as roll bar, sun roof, rear bucket seats, custom wheels, etc. Includes opening hood, detailed engine with optional turbocharger, and more. Molded in color, clear, chrome and rubber.
Monogram Chevrolet El Camino Camper, 1/24, 2252
Plastic Model Kit, Box Condition: Sealed Exc+
$38
Still factory sealed. Dated 1979. Well detailed featuring full engine & engine compartment, opening hood, streamlined camper top, special wheels, opening tail gate, fully detailed interior and more. Molded in colored plastic, clear and chrome plate with rubber Goodyear tires.
Balsa USA Moonraker - 54 Inch Wingspan R/C Aircraft
Wood and Plastic Model Kit, Box Condition: VG
$135
Out-of-production and rare. Never started. Inside, the kit is exactly as it left the factory. It has been inventoried complete. Includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Carl Goldberg Models The Ultimate Wing Kit - 54 Inch Wingspan, K-93
Wood Model Kit, Box Condition: Sealed Good-
$69
Still factory tape sealed. Please note that this the deluxe Carl Goldberg wing kit only for the 54 inch wingspan 'Ultimate' and not the complete aircraft kit. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Balsa USA Northstar - Land Or Seaplane 44 Inch Wingspan R/C Aircraft, 455
Wood and Plastic Model Kit, Box Condition: Sealed VG
$195
Still factory sealed and rare. This very unique design has landing gear and is also an seaplane...or it can take off and land on snow! This model can do every maneuver that a conventional model can do except spin. It will also do one maneuver that conventional models do not do - a controlled vertical descent. Features full size plans, fully formed landing gear, die-cut balsa parts, premium quality hardwood and plywood parts, quality AAA grade balsa, complete hardware package, and more. The new and revised (for this issue) 36 page instruction manual has over 150 photos and illustrations that leaves nothing to change. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Robbe Balance Motor Glider - 63 Inch Wingspan R/C Aircraft, 3173
Wood and Plastic Model Kit, Box Condition: Exc
$265
Very Rare. This is a highly prefabricated motor-glider model that includes a plastic fuselage with all necessary holds and cuttings done (down to the nose for perfectly pre-defined thrust angle), anodized aluminum tail boom, factory-built wings with main sparts of pine wood, factory-built tail feathers, electric motor and mount, 6x6" folding propeller, spinner and motor switch unit, very complete R/C hardware pack, light-weight vacuformed canopy (still factory sealed and in superb condition), extensive, full color decal (sticker) sheet and more. Never started. Inside, the kit is exactly as it left the factory. Robbe sealed most of the parts in clear bags; those parts are still factory sealed. The very few parts that were never sealed are inventoried complete. Includes all paperwork. The heavily illustrated and large instruction book is in German, English and other languages as well.
Balsa USA 30 Inch Wood Floats - For R/C Aircraft
Wood Model Kit, Box Condition: Good-
$38
This box contains a kit of two 30" long wood floats. Features die-cut wood parts, full instructions and more. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Sure Flite All Foam Floats With Fibreglassed Bottom And Spray Rails - 28 Inch Long For R/C Aircraft
Other Materials, Box Condition: Good
$36
This box contains a set of 28" long injection molded foam floats. The Bottom and Spray Rails have been fiberglassed; the total weight per pair which includes spruce spars and fly plywood attachment tabs is 8 ounces. Capacity is up to 5.5 pounds. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Gee Bee MkIV Float - 33 Inch Long Floats For R/C Aircraft
Plastic Model Kit, Box Condition: VG
$36
This box contains a set of 33" long floats that are completely assembled and ready to mount (not a kit). They will attach to any conventional landing gear or you can assembly your own strut assembly to attach them to. These floats work equally well in water or snow and can be attached and removed in less than 3 minutes; includes mounting bolts and spreader bars. Made from a very lightweight (and hollow) plastic, they are strong & durable and will not puncture in a ground landing. The plastic is paintable. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Dumas Swamp Buggy Everglades Airboat - 28 Inches Long / 10 Inch Beam / For .19 Engines, 1/8, 1501
Wood and Metal Model Kit, Box Condition: Sealed Exc
$65
Still factory sealed. This Chuck Welch design is easy-to-build and good performer. Features aircraft-grade plywood, plans, full instructions and more. NOTE: this kit was factory-packed in a very sturdy, thick and heavy cardboard box. It will be shipped simply wrapped in heavy brown paper. You can specify that it be boxed if you wish, but additional shipping charges will apply.
SIG Deweybird 1/2A Control Line Model - 22.5" Wingspan .049 Engine Flying Model, CL-15
Wood Model Kit, Box Condition: Sealed Exc+
$56
Still factory sealed. The popular Deweybird is an easy to build model and makes a fine first flying model kit. Can be flown as a trainer or sport flyer. Features formed landing gear, di-cut fuselage, wings & tail, formed pushrods, nylon bellcrank & hardware, decals and step by step plans.
SIG Thermal Dart - Frank Ehlings No.2 Model - 24 Inch Wingspan Rubber-Powered Free Flight Aircraft - For Beginners, FF-12
Wood Model Kit, Box Condition: Sealed VG
$20
Still factory sealed. This model is a is a perfect introduction to rubber free flight. The popular design is easy to build, forgiving and a very good flyer. It includes all parts and is stick and tissue construction but a solid motor stick.
SIG SIG Cub - 23.5 Inch Wingspan Freeflight Aircraft, FF-1
Wood Model Kit, Box Condition: Sealed Exc
$29
Still factory sealed. This kit is a very good performer and capable of long distance/high endurance flights. Features die-cut quality balsa wood, stripwood and other wood stock as needed, metal hardware, rubber motor, plastic propeller, very lightweight plastic wheels, covering tissue (made in Japan), full sized plans and SIGs excellent illustrated instructions.
Mania THREE Mitsubishi Type 99 Ki-53 Sonia And THREE Type 97 Ki-27 Nate, 1/72, 01-800
Plastic Model Kit, Box Condition: VG
$32
SALE!! Includes all 6 kits in the 2 boxes shown. NOTE: Sold AS-IS and not inventoried. This collector was very meticulous and of his thousands of kits that I did inventory, 95% are complete. But on these kits he cut the sprue (trees) with the part numbers still attached to each number, so the parts are loose. Because of that, I have not inventoried these kits. NOTE: he built minor sub assemblies (cockpit tubs, wing halves, etc.) to 'professional' quality. Again, these kits are sold not inventoried and AS IS hence the very low price.
Matchbox Mikoyan Mig-21 MK - Egyptian Air Force No 26 Sq 1981 or Finnish Air Force HavLLv 31 1980, 1/72, PK-41
Plastic Model Kit, Box Condition: Exc
$22
This two color model from 1986 is well molded with excellent fit and finish. Includes a full color painting guide and decals for both air forces. Never started and inventoried 100% complete including decals and instructions.
Aoshima Mitsubishi Ki-67 Hiryu Peggy Bombers - Two Kits, 1/144, 4
Plastic Model Kit, Box Condition: Good+
$24
Contains two complete Peggy bombers. Very nicely detailed and features very fine raised panel lines, finely molded parts, clear windshield, side blisters, turrets & observation windows, rotating wheels & propellers and more. Includes decals for two aircraft. The model has not been started. Inventoried 100% complete with all parts, decals and instructions.
Hasegawa OV-10A Bronco - US Marines Forward Air Controller, 1/72, AT14
Plastic Model Kit, Box Condition: Exc
$22
Limited edition with special decals for the aircraft on the box art. Never started and inventoried complete with all parts and includes decals and instructions.