AMT Fruehauf Model FB Beaded Panel 40 Foot Van Trailer, 1/25, T507
Plastic Model Kit, Box Condition: Sealed VG++
$68
Still factory sealed. Rare original issue and very hard-to-find in this condition. Has more than 100 parts and fits any of the AMT tractor models. Features fully detailed F-2 Tandem suspension, operating 'Select-A-Point" sliding suspension, air brake system with flexible lines, mud guards, rear doors that open realistically, two position support assembly either 'raised' or lowered for static display and more. Molded in white, chrome plate, red-tinted clear and with rubber tires and metal axles.
Heller Hispano Suiza K6 1934, 1/24, 733
Plastic Model Kit, Box Condition: Sealed Exc
$72
This is the only injection-molded model of this subject. Very well detailed and features 150 pieces, excellent full engine, removable hood, rolling chassis build up like the actual car, detailed front and rear suspension, front steering linkage, driveline, detailed interior with divide panel and even decals for the 'engine turned' side panels show on the box art work. Molded in black, clear, chrome plate and with rubber wheels. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Fujimi BMW Alpina B7 Turbo Coupe/1 - Enthusiast Model Issue, 1/24, 13
Plastic Model Kit, Box Condition: Exc
$50
Hard-to-find issue that is highly detailed. Features complete engine & engine compartment, full front & rear suspension and driveline, engine display stand, detailed brake assemblies, excellent interior, opening hood & trunk and much more. Molded in gloss white, clear, gray, chrome plate and with rubber tires. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Heller Delage D.8SS - (D8SS), 1/24, 720
Plastic Model Kit, Box Condition: VG++
$64
Hard to find. Very well detailed kit with 110 pieces. Features rolling chassis build-up just like the actual car, very good front and rear suspension and drive line, detailed engine, removable hood, complete interior, optional up or down convertible top, instrument face decals and more. Molded in bright yellow, black, clear and chrome plate and with rubber tires. Never started and inventoried complete with all parts and includes decals and instructions.
Tamiya Morris Mini Cooper Racing, 1/24, 24130
Plastic Model Kit, Box Condition: Good
$44
From 2001 and a high quality kit that is well detailed inside and out. Features complete engine and engine bay, opening hood, detailed front and rear driveline and suspension, full exhaust, complete interior and more. Molded in British Racing Green, black, clear, chrome plate and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Gabriel 1909 Ford Model T Sport Runabout - (ex Hubley), 1/20, 26441
Metal and Plastic Model Kit, Box Condition: Sealed VG+
$62
Still factory sealed. Large 1/20 scale kit from ex-Hubley molds and one of a very popular and desirable series of metal and plastic classic automotive kits. Features over 120 parts, excellent cast metal body, roof, hood, engine, suspension & more, many injection molded smaller parts such as spoke wheels, interior seats and many other details, real white rubber tires, two trees of brass plated parts, real working steering, full engine detail, removable hood, detailed exhaust, suspension and driveline, complete interior, flexible hoses, clear windshield and more.
MPC 1972 Dodge Charger - Stock / Wild Street Machine / Super Stock, 1/25, 1-7207-225
Plastic Model Kit, Box Condition: Sealed Good++
$380
Incredibly rare first issue and ever rarer in factory sealed condition. The clear seal is complete and only has one small 1.5" long split along the top long side panel. The model includes parts to build one of the three versions shown. Features detailed engine and compartment, opening hood, full interior detailed underside and more. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires. NOTE: this kit must shipped insured and double-boxed.
Monogram Mazda RX-7 Cafe Racer, 1/24, 2277
Plastic Model Kit, Box Condition: Sealed Exc
$49
Still factory sealed. Dated 1981. Excellent kit with the quality you would expect from Monogram. Features detailed rotary engine and engine compartment, opening hood, separately molded suspension and exhaust, complete interior, roll bar, separately molded fender flares, decals and more.
Life-Like Lafayette Coach, 1/48, 09671
Plastic Model Kit, Box Condition: VG
$34
High quality kit from the original 1950s ex Miniature Masterpieces molds. Never started and inventoried complete with all parts and includes instructions.
Life-Like Westward Ho Pioneer Wagon - (Covered Wagon) - (ex- Miniature Masterpiece / Revell / Adams), 1/48, 09683
Plastic Model Kit, Box Condition: Exc
$49
Excellent builder from the original 1950s molds. Very highly detailed model includes wagon, accessories, large display base, two Longhorn Oxen, horse, rider and figure. Never started and inventoried complete with all parts and includes instructions. This kit has an interesting history. 'Miniature Masterpieces' was formed through an alliance of Lew Glaser (Revell) and Steve Adams (Adams Action Models) in 1953. Although the molds were made at Adams and it had the appearance of an independent company, the firm was run by Revell down to the prototypes being made at the Revell plant. Originally there was no evidence of the parent company on the surface. The State Coach of England was the first kit, issued in 1953. More kits of excellent quality followed. Revell completely took over the line in 1954 and in that year and the next, kits were labeled 'Revell' with a 'Miniature Masterpiece' label on the box top also. However, Adams broke the relationship with Revell in the later 1950s and began making kits under the Adams name in 1958 with the original molds. Life-Like acquired these Adams molds but not all Adams molds. This issue is from about 1976 and lists the former MM Chuck Wagon, Western Figures, Wells Fargo Stage coach as well as numerous Pyro and Palmer kits as being currently available.
Life-Like Circle A Chuck Wagon - (ex- Miniature Masterpiece / Revell / Adams), 1/48, 09680
Plastic Model Kit, Box Condition: VG
$58
Excellent builder from the original 1950s molds. Very highly detailed model includes wagon, accessories, large display base and the animals and figures shown in the box art. Never started and inventoried complete with all parts and includes 'Circle A' decals and instructions. Please note that the instructions have a factory printing flaw on the back and are 'smeared.' This kit has an interesting history. 'Miniature Masterpieces' was formed through an alliance of Lew Glaser (Revell) and Steve Adams (Adams Action Models) in 1953. Although the molds were made at Adams and it had the appearance of an independent company, the firm was run by Revell down to the prototypes being made at the Revell plant. Originally there was no evidence of the parent company on the surface. The State Coach of England was the first kit, issued in 1953. More kits of excellent quality followed. Revell completely took over the line in 1954 and in that year and the next, kits were labeled 'Revell' with a 'Miniature Masterpiece' label on the box top also. However, Adams broke the relationship with Revell in the later 1950s and began making kits under the Adams name in 1958 with the original molds. Life-Like acquired these Adams molds but not all Adams molds. This issue is from about 1976 and lists the former MM Chuck Wagon, Western Figures, Wells Fargo Stage coach as well as numerous Pyro and Palmer kits as being currently available.
Monogram Folgers Monte Carlo Stock Car - Tim Richmond NASCAR, 1/24, 2734
Plastic Model Kit, Box Condition: Sealed Good
$24
Still factory sealed. This kit is from 1986 and features lift-off body, detailed engine, exhaust & underside, opening hood, full interior with roll cage, extensive decals and more.
Fujimi Nissan Fairlady 280ZR Racing Motorized, 1/20, RC6
Plastic Model Kit, Box Condition: Fair+
$145
Rare, early Mokei issue of this large scale and very well molded model. It is designed to be motorized with a RE-14 or similar sized electric motor and includes all hardware; but please note that Fujimi did not furnish the motor with the kit. Features switchable rear wheel drive, steerable front wheels, nicely detailed interior, opening doors, a huge decal sheet with all the colorful stripes and markings of the box art car and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The box is complete but worn and clear tape is holding most corners together.
Airfix 1933 Alfa Romeo - 2300cc 8C, 1/32, 02441
Plastic Model Kit, Box Condition: Good
$28
1980s issue from the original molds. Very well detailed with 107 pieces and features very good chassis detail, full suspension, complete interior, male and female driver and passenger figures and much more. Molded in light gray and clear. The kit has never been started. It has been inventoried complete with all parts and includes instructions. NOTE: parts #25 and #32 are broken; these are front fender support rods. All pieces are present so you can repair them.
Pocher Porsche 911 Carrera, 1/8, K30
Multimedia Model Kit, Box Condition: Exc
$889
Although Pocher is no longer in business, they are acknowledged as the finest car model makers ever. The kit is in 1/8 scale and measures over 20 inches long when built. This kit features a black high gloss body and body panels and the box top says 'No Painting.' This is an accurate statement given the magnificent reflection and gloss in the body and very large variety of part colors included. The model is well detailed and includes an all metal inner body shell, full engine and trans-axle detail, opening rear hood, working metal spring suspension, a great many cast metal suspension parts, detailed brake rotors, hollow rubber tires, one piece rims, complete interior with pliable red leather-like plastic seats, 'carpet,' seat belts and shoulder harnesses, full dash, working steering wheel, opening doors, clear windows and orange and red tinted clear for light lenses and much more. The kit has never been started. The parts that were bag sealed at the factory are still factory sealed; the parts there were never bag sealed (just placed in bags) have been inventoried complete. With decals and instructions. This kit must be shipped insured.
Metal Craft 1913 Stutz Bearcat Sports Car, 1/16, 6492
Multimedia Model Kit, Box Condition: Exc
$129
Very rare 1970s multi-media, large-scale model made by Wagner Metal Craft of Japan. Other scale models in the series included the Rolls Royce Silver Ghost, Lincoln 1928 Model L Convertible, Rolls-Royce 1931 Phantom II and Duesenberg 1934 Model SJ Town Car. This Bearcat features right around 100 pieces, suspension & axle detail, spoked wheels, rubber tires, detailed interior, clear windshield and more. The box top photo is a photo of the actual model kit assembled. You can paint it for better realism if you wish, but painting is not required as all parts come in the come in the colors shown. The parts are metal and injection molded plastic. There is no engine in this model but the hood can be removed. Underside detail is limited to the suspension & axles as well as what is molded into the underpan. Never started and all of the parts are still on the internal factory sealed colored cardboard blister displays and includes instructions. NOTE: the scale is approximate. The kit measures very close to 10 inches when assembled; I took the length of the actual car as 160 inches; hence the 1/16 scale. So I am anything but certain; so please do your own research and see if you agree with my numbers.
Hubley Ford Model A Coupe, 1/20, 4861
Metal and Plastic Model Kit, Box Condition: Good
$62
One of a series of popular and desirable metal and plastic kits by Hubley. The metal castings are very well done and detailed. Includes metal body, rumble seat cover, frame, hood, engine, suspension and more, many injection molded parts such as spoke wheels, roof, headlights, interior seats and more. Includes real rubber tires. Features steering front wheels, full rolling chassis with engine, exhaust, suspension and driveline just like the real car, removable hood, complete interior and more. The kit has never been started. The small metal parts, hardware and plastic parts are still factory sealed. Only the large metal parts were never sealed and have been inventoried 100% complete including decals and instructions.
Monogram Six Carb And Intake Assembly - Custom Accessories For 1/8 Scale Cars, 1/8, AK201-59
Plastic Model Kit, Box Condition: Good+
$145
Very rare and dated 1963. First and only Four-Star issue of this rare accessory for customizing and of Monogram's large 1/8 car kits or any other larger car kit. The beautifully chromed parts in mint condition and includes a Weiand manifold, six Stromberg carbs, six air cleaners, carb linkage & water outlet and excellent instructions. Never started and complete. The parts are still wrapped in the original factory tissue paper. The clear cellophane window on the back is in mint condition. In an attempt to make the superb but very expensive 1/8 car molds pay off, Monogram issued some parts separately as accessories for any larger car models. The entire line came out in 1963 and consisted of AK201-59 Six Carb Assembly, AK202-59 Oval Gas Tank, AK203-79 Drag Race Set, AK204-79 GMC Blower Set, AK205-79 Chrome Wheel Set, AK206-100 White Wall Drag Slicks and AK207-79 White Wall Tires. Sales were very weak because all of the 1/8 scale car kits were very expensive for that time, so and the line was discontinued.
Monogram Oval Gas Tank - Custom Accessories For 1/8 Scale Cars, 1/8, AK202-59
Plastic Model Kit, Box Condition: Good+
$59
Very rare and dated 1963. First and only Four-Star issue of this rare accessory for customizing and of Monogram's large 1/8 car kits or any other larger car kit. The beautifully chromed parts in factory-new condition and includes the large chrome tank with embossed 'FORD' ends, filler cap, mounting platform and excellent instructions. Never started and complete. The parts are still wrapped in the original factory tissue paper. The clear cellophane window on the back is in mint condition. In an attempt to make the superb but very expensive 1/8 car molds pay off, Monogram issued some parts separately as accessories for any larger car models. The entire line came out in 1963 and consisted of AK201-59 Six Carb Assembly, AK202-59 Oval Gas Tank, AK203-79 Drag Race Set, AK204-79 GMC Blower Set, AK205-79 Chrome Wheel Set, AK206-100 White Wall Drag Slicks and AK207-79 White Wall Tires. Sales were very weak because all of the 1/8 scale car kits were very expensive for that time, so and the line was discontinued.
Scale Models 1909 Ford Model T Sport Runabout - (ex Hubley), 1/20, 4021
Metal and Plastic Model Kit, Box Condition: NM
$52
Large 1/20 scale kit from ex-Hubley molds. One of a series of popular and desirable metal and plastic kits reissued by 'Scale Models' (and earlier Gabriel from original Hubley molds. The metal castings are very well done and detailed. Features over 120 parts, cast metal body, roof, hood, engine, suspension and more, many injection molded parts such as spoke wheels, interior seats and many other details. Includes real white rubber tires. Features two trees of brass plated parts, steering front wheels, full engine detail, removable hood, detailed exhaust, suspension and driveline, complete interior, flexible engine hose and more. The kit is likely from the 1980s. The small metal pieces and hardware are still in the factory sealed bags. All other parts are not sealed and have been inventoried complete. Includes instructions.