Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

J&L Curtiss-Wright T-32 Condor (YC-30 - CT-32) American Airlines, 1/72

Vacuform Model Kit,   Box Condition: VG

$44   

First flown in 1933, the Condor II was metal and wood construction and powered by two Wright Cyclone engines. They entered regular and night service with Eastern Air Transport and American Airlines as 12-passenger luxury night sleeper transports. The military purchased two with the designation YC-30. Eight bomber variants were built as BT-32 and the CT-32 cargo variant was exported to Argentina. Never started. Inventoried 100% complete with all parts, decals and instructions. Vacuform models are not for beginners. A certain amount of experience and scratch-building skill is necessary.

Contrail Consolidated P2Y-2, 1/72

Vacuform Model Kit,   Box Condition: Sealed NM

$135   

Still factory sealed - very rare in this condition. Very good quality kit of the pre-PBY US Navy flying boat. Includes full decals, clear parts, main vac parts and injection molded details (props, struts, wheels, etc) and engines. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required.

Airmodel Two seat FW190 A-8/U-1 with A and F Conversions - Bagged, 1/72, 135

Vacuform Model Kit,   Box Condition: Sealed NM

$6   

Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit to complete. Parts included are for the conversion only. Some scratchbuilding is required.

Airmodel North American T-39 / T3J-1 Sabreliner - Bagged, 1/72, 193

Vacuform Model Kit,   Box Condition: Sealed NM

$32   

Rare. Older but nicely molded with recessed panel lines. Includes basic airframe parts molded in white, clear canopy (in great shape and not yellowed) and instructions/plans. Can be built as civil or military. A certain degree of modeling skill and scratch-building skills are required to build vacuform kits. They are not recommended for beginners.

Aeroclub Gloster Gamecock I, 1/48

Vacuform Model Kit,   Box Condition: Good

$54   

Still the only Gamecock in 1/48 scale. Rare, limited issue. The kit consists of high quality vacuformed main airframe components, cast metal engine, intake manifold, landing gear struts, prop, machine gun and more, two sizes of airfoil cross section stock, other strip and round stock as needed, colorful decals and instructions. The vacuform parts of a very high quality - higher quality than many injection molded kits. The kit has never been started. Inventoried 100% complete including decals and instructions.

Combat Models Confederate Ram CSS Manassas 1863, 1/72

Vacuform Model Kit,   Box Condition: VG

$59   

Large-scale kit that is still in the original cardboard Combat shipping box with label. This is a big kit vacuformed in white. The kit consists only of the upper hull, lower hull, smoke stack and one other part as well as full size plans. It has never been started and is inventoried complete. Other parts will need to be scratch built or from your spares box. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

Airmodel Sikorsky H-5 and Royal Navy HR 3 Dragonfly - Bagged, 1/72, 132

Vacuform Model Kit,   Box Condition: VG

$8   

Nicely molded and features all recessed panel lines. Very basic kit only with molded white fuselage, clear canopy and plans only. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Airmodel Whirlwind HAR-10 Conversion - Bagged, 1/72, 88

Vacuform Model Kit,   Box Condition: VG

$8   

Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit to complete. Parts included are for the conversion only. The recommended base kit is the Airfix Whirlwind. Some scratchbuilding may be required and vacuform conversions are only recommended for those experienced with vacuform models.

Rareplane Henschel HS-126, 1/72

Vacuform Model Kit,   Box Condition: VG

$9   

Still factory bag sealed. Very highly detailed and well molded vacuform kit. Includes full cockpit and crew stations.

Waku Yak-11 Two Seater - Poland / Civil Czech / Czech Air Force, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$12   

Still factory sealed. Very high quality complete vac kit - no additional or made from scratch parts required. Mold quality is higher than most injection molded kits. Features very fine recessed panel lines and very good cockpit details. Decals for four aircraft are included. The model as never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

Airframe Siemens-Schuckert D.IV (D-IV) or D.III (D-III) - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$8   

Still factory sealed. Basic vac kit with some molded in detail. Comes with alternate parts so you can build the D-IV or the D-III. Certain modeling skills are required to build vacuform kits. Not recommended for beginners. The D-III was renowned for it's incredible rate of climb, but was plagued by engine trouble. The D-IV was designed to have a higher speed in level flight, and in some respects was a better fighter than the famous Fokker D-VII.

White Eagle Beech C-45 - Bagged, 1/48, 109

Vacuform Model Kit,   Box Condition: Sealed

$14   

Large-scale vacuform kit with main airframe parts, metal props and cast resin cowls & engines, landing gear struts and wheels/tires. Never started and inventoried complete. Vacuform kits are only recommended for people experienced with this type of kit. Previous experience and scratch building skills are required.

Rarejets Bell P-59B Airacomet, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$8   

Very high quality vacuform kit. Features very good detail, complete cockpit, clear canopy and instructions/plans. Never started. Complete with all parts and instructions. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.

Vac Wings Thomas-Morse S4C Scout Tommy - Bagged, 1/48, VW489

Vacuform Model Kit,   Box Condition: Sealed

$42   

Still factory sealed and the only 1/48 SC4 kit ever made. High quality vacuform kit with injection molded struts, clear, decals and full plans/instructions. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

Vac Wings Yakovlev Yak-36 Forger - Bagged, 1/48, VW4811

Vacuform Model Kit,   Box Condition: Sealed

$18   

Large 1/48 scale Forger. Very nicely molded vac kit with fine, recessed panel lines, numerous metal parts including landing gear, weapons pylons, missiles machine guns and more, clear canopy and full decals. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.

Vac Wings Kawasaki Ki-32 Mary, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$5   

High quality vacuform kit with recessed panel lines, full plans/instructions and clear parts as needed. Still factory sealed. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

Vac Wings Sukhoi SU-2, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$5   

High quality vacuform kit with recessed panel lines, full plans/instructions and clear parts as needed. Still factory sealed. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

Rareplane Piper L-4 Grasshopper with Clear Fuselage - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$18   

Still factory sealed. Very high quality vacuform kit with moldings equal to or better than many injection molded models. The fuselage is molded in clear so the windows can be accurately and realistically represented. Features complete cockpit and instructions/plans. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.

Rareplane Douglas DC-4 / C-54 / R5D-3 Skymaster with Merlin Conversion and Capital Airlines and USAF MATS Decals, 1/72

Vacuform Model Kit,   Box Condition: VG

$59   

Very large and rare 1/72 DC-4 kit that contains even rarer 1/72 scale decals. There is one large sheet for Pacific Division USAF MATS (Military Air Transport Service)#49068 and a large Capital Airlines sheet. The actual model is very nicely molded with fine panel lines, window, door and rivet detail. Builds either of three versions and includes full paint and markings guide. Also includes all needed parts for the Merlin engine conversion. There is no assembly but NOTE: one fuselage half has been cut out by a professional builder. There is plenty of plastic left around it - it was simply a rough cut. Inventoried 100% complete with all parts and plans.

Welsh McDonnell Douglas MD-82, 1/144, SL37

Vacuform Model Kit,   Box Condition: VG

$18   

High quality, limited edition injection molded, metal and vacuform kit. Features injection molded wings, engine pods and stabilizers, vac fuselage, and all other parts in cast metal. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The large parts were never factory sealed and are inventoried complete. Includes instructions but NOTE: Missing decals.