Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Operating Visible Turbo Engine - With Optional Race Parts - (Ford Rokstock), 1/3, 8879

Plastic Model Kit,   Box Condition: Good

Sold   

Hard-to-find motorized model from 1985. Very large and highly detailed clear kit where an electric motor drives pistons, connecting rods, crank, camshaft, fan and distributor system. Molded in clear, black, gray, rubber and red. The kit has not been started. Inside, the kit is like new. All the parts are still factory sealed except the clear parts. The clear parts were not sealed and have been inventoried 100% complete. Includes instructions.

Monogram Kenworth W-900 Aerodyne Conventional Semi Tractor Truck, 1/16, 85-2508

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Rare, very large 1/16 scale truck. 2012 reissue from the original 1980s molds. Well detailed with 278 pieces featuring a rolling chassis build just like the actual truck, complete engine, suspension, exhaust and drive line detail, detailed engine compartment, opening hood, sleeper, complete interior, alloy wheels, dual exhaust stacks, twin antennas, 5th wheel, air horns and side mirrors, pinstripe decals, license plates and more. Molded in blue, black, clear, gray tinted clear, chrome plate and with flexible black tires.

Monogram Buick Mountain Dew Regal Grand National Race Car, 1/24, 2204

Plastic Model Kit,   Box Condition: Good-

Sold   

Kit is from 1983. Features lift-off body, detailed engine, opening hood, exhaust and underside, roll cage, full interior, extensive decals including large green panels and more. Molded in white, clear, satin chrome and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (chrome and clear) have been inventoried complete including decals and instructions.

Trumpeter Vought F4U-1D Corsair - Checkerboard VMF-312 Okinawa June 1945 / Lt. Col Donald Yost CO of VMF-351 USS Cape Gloucester July 1945 - (F4U1D), 1/32, 02222

Plastic Model Kit,   Box Condition: Good-

Sold   

Beautifully molded kit with 344 parts. Features highly detailed cockpit and engine, clear cowling, optional position canopy, folding wings and much more. Includes decals and paint guide for the two aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Although the box has wear, the kit inside is in like-new condition.

DML Fokker DR-1 Triplane - Lt. Fritz Kempf (DR.1), 1/48, 5901

Plastic Model Kit,   Box Condition: Exc

Sold   

Dated 1992 and a very well detailed and superbly molded model. Features all very fine recessed engraving, super detailed cockpit, machine guns and engine. Includes two frets of photoetched parts and stainless steel rigging cables. Never started. It has been inventoried and includes all plastic parts, decals and instructions. NOTE: includes two frets of PE parts but is missing the PE seatbelts (3 parts total).

MPC Star Wars C-3PO, 1-1913

Plastic Model Kit,   Box Condition: VG

Sold   

First issue. 1977 release tied in with the famous film. Molded in gold, chrome and transparent red. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including instructions.

Monogram MG TC Roadster, 1/24, 2290

Plastic Model Kit,   Box Condition: Good++

Sold   

Very finely molded and detailed kit with traditional Monogram quality. Builds a rolling chassis just like the actual car and features a complete engine and engine compartment, removable bonnet, detailed suspension & drive line, full interior and optional 'top up' or boot. Molded in white, red, chrome, clear and with rubber tires. The model has never been started. Inventoried 100% complete with all parts and instructions.

Welsh McDonnell Douglas MD-82, 1/144, SL37

Vacuform Model Kit,   Box Condition: VG

Sold   

High quality, limited edition injection molded, metal and vacuform kit. Features injection molded wings, engine pods and stabilizers, vac fuselage, and all other parts in cast metal. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The large parts were never factory sealed and are inventoried complete. Includes instructions but NOTE: Missing decals.

Scale-Master Boeing B-377 Stratocruiser Northwest - Bagged, 1/144, SM-21

Vacuform Model Kit,   Box Condition: VG

Sold   

Still in the factory sealed bag. Nicely molded kit with recessed detailed. Includes fuselage, wings, vertical and horizontal stabilizers, cowlings, propellers, wheels and other details. Has a beautiful Scale-Master Northwest full decal sheet, plans and instructions. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Rarejets Bell P-59B Airacomet - Bagged, 1/72

Vacuform Model Kit,   Box Condition: VG

Sold   

Very high quality vacuform kit. Features very good detail, complete cockpit, clear canopy and instructions/plans. NOTE: this kit has had the main parts professionally cut and professionally sanded to fit. Nothing has been glued. As you know, this is 1/2 the work of this kit and it is done as well as possible. Complete with all parts and instructions. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.

Airframe Siemens-Schuckert D.IV (D-IV) or D.III (D-III) - Bagged, 1/72

Vacuform Model Kit,   Box Condition: VG

Sold   

Still factory sealed. Basic vac kit with some molded in detail. Comes with alternate parts so you can build the D-IV or the D-III. Certain modeling skills are required to build vacuform kits. Not recommended for beginners. The D-III was renowned for it's incredible rate of climb, but was plagued by engine trouble. The D-IV was designed to have a higher speed in level flight, and in some respects was a better fighter than the famous Fokker D-VII.

Airmodel Two seat FW190 A-8/U-1 with A and F Conversions - Bagged, 1/72, 135

Vacuform Model Kit,   Box Condition: VG

Sold   

Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit to complete. Parts included are for the conversion only. Some scratchbuilding is required.

Vac Wings Sukhoi SU-2, 1/72

Vacuform Model Kit,   Box Condition: VG

Sold   

High quality vacuform kit with recessed panel lines, full plans/instructions and clear parts as needed. Still factory sealed. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

Trumpeter Grumman F6F-5N Hellcat Nightfighter, 1/32, 02259

Plastic Model Kit,   Box Condition: Good

Sold   

Superb, large scale kit with 374 parts. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Easy Built Models Lancaster Bomber - 38 Inch Wingspan, D-3

Wood Model Kit,   Box Condition: Good+

Sold   

Very large scale stick and tissue style kit. Features 38" wingspan, 15 sheets of printwood, factory-cut stringers and spars, numerous balsa blocks, scale wooden props (cut-out style), 5 clear vacuform canopies in very good condition, covering material, and well detailed plans. Never started. It has been inventoried complete with all parts.

LS TWO Mitsusbishi Ki-67 Type-4 Hiryu Peggy / Ki-67 Yasukuni Peggy / Mitsubish Ki-109, 1/72, 151-450

Plastic Model Kit,   Box Condition: VG

Sold   

SALE!! Includes all 4 kits in the 3 boxes shown. NOTE: Sold AS-IS and not inventoried. This collector was very meticulous and of his kits that I did inventory, 95% are complete. But on these kits he cut the sprue (trees) with the part numbers still attached to each number, so the parts are loose. Because of that, I have not inventoried these kits. NOTE: he built minor sub assemblies (cockpit tubs, wing halves, etc) to 'professional' quality17.5 x 10.3 x 6.. Again, these kits are sold not inventoried and AS IS hence the very low price.

Air Team Heinkel He-170A - Hungarian Air Force 1940, 1/72, 72-04

Resin Model Kit,   Box Condition: VG

Sold   

Resin kit with a clear vacuformed canopy and 3 types of cylindrical metal stock as required. Includes full decals and paint guide. Never started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: both prop blades broke from the spinner base but they are present for repair.

Guillows Fokker D-VII - 18 Inch Wingspan Rubber Powered Balsa Wood Kit, WW-4

Wood Model Kit,   Box Condition: Good-

Sold   

From the mid 1960s and one of a very popular line of World War 1 flying aircraft stick-and-tissue kits with 18 inch wingspans. Kit features scale plastic wheels, propeller & nose cowl, fully finished thrust button die cut balsa parts, covering tissue, rubber motor and a large, color decal sheet. Includes excellent, full size, detailed plans. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.

Rivarossi Heisler Steam Locomotive 2-Truck Model Georgia Pacific #10 - HO Scale, 1/87, HR2411

Plastic Model Kit,   Box Condition: NM

Sold   

Sold new for $270. Rare and a beautiful model in investment-grade, never-run condition. This locomotive has never been run and never even displayed. It is still in the factory packaging exactly as they were shipped. The small parts are still sealed in the factory parts bag. The instructions and separate parts diagram are both present and 'excellent' and even the original factory foam is still in like-new condition. There are no broken or missing parts. NOTE: this kit must be shipped insured. Not tested as I have no way of testing trains.

DML Gulf of Sidra F-14 vs. Su-22J, 1/144, 4001

Plastic Model Kit,   Box Condition: NM

Sold   

Well detailed kit includes both models featuring recessed panel lines, weapons loads, clear canopies, pilots and decals. Never started. It has been inventoried complete with all parts and includes decals and instructions.