Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Griffin Douglas DC-9-10 / DC-9-20 / DC-9-50 - TWO Conversion Kits - Bagged, 1/144, GC-2

Vacuform Model Kit

Sold   

Contains two conversion kits - one -10/-20 and one -50. Also includes two very nice decal sheets with cockpit and cabin windows and doors. Never started and complete. Includes plans/instructions.

Revell Dragster Chrome Parts Sealed Header Card, 1/25, C1124

Plastic Model Kit,   Box Condition: Sealed

Sold   

Rare. Factory sealed card-mounted 'Custom Car Parts' from the early to mid 1960. All parts are chrome plated and the instructions are on the reverse of the card.

Lindberg Grumman F11F-1 Blue Angels - (F11F1), 1/48, 541-98

Plastic Model Kit,   Box Condition: NM-

Sold   

Classic 1950s hardbox kit with Ray Gaedke artwork. Rare first issue with 98 cent price extension. The box is in near mint condition. Features fine raised panel details, movable ailerons, rudder and elevators and detailed engine with opening inspection panel. Still the only early short nose F11F Tiger kit in 1/48. Never started. Inventoried 100% complete with all parts, decals and instructions.

Lindberg Douglas A-4D-1 Skyhawk by Paul W. Lindberg, 1/48, 529-79

Plastic Model Kit,   Box Condition: Exc

Sold   

Early issue small narrow box from the mid-1950s with classic Ray Gaedeck Box Art. Please note that this kit represents the very early (probably prototype) Skyhawk. Features detailed jet engine, opening inspection panel, pilot and ejection seat, opening canopy, full landing gear, centerline drop tank, wing rockets and display stand. Never started and inventoried 100% complete with all parts, decals and instructions.

Binkley 40 Foot Steel Box Car New Haven - HO Craftsman Kit, 1/87, HO-116

Wood and Metal Model Kit,   Box Condition: Exc

Sold   

Very highly detailed and accurate craftsman kit from the 1950s. Features milled and finished hardwood roof, floor, side supports and center sill, hardwood car sides that are factory painted New Haven (and in mint condition), numerous metal parts including roof ribs, bolsters, side steps, roof walk, car ends, brake valve, reservoir and cylinder, side doors that open, door guides, brake wheel and ladders, grab irons and a beautiful set of all metal, real sprung trucks. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Guillows P-51D Mustang - 27 inch Wingspan for Free Flight or R/C Conversion, 1/16, 402

Wood Model Kit,   Box Condition: Sealed NM

Sold   

From the 1960s. Large scale stick-and-tissue model that is well detailed. Can be flown rubber free flight, gas free flight, or converted to electric RC using modern light-weight servos and receivers. Well detailed with scale plastic wheels, plastic propeller, vacuform spinner, cowl and exhaust stacks, full color decals, covering tissue, die cut balsa parts, rubber motor, plywood firewall and excellent full size plans. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.

AMT Che Riviera / 1965 Buick Riviera, 1/25, T301-200

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare kit from the mid to late 1960s. Features humorous take-offs on Fidel Castro and his regime. The decal sheet has 'Castro Oil,' 'Havana Banana,' 'Skyjack Limousine,' 'Beard of Paradise Airport Limousine,' and more. Car can be built one of three way and features Grand Sport dual quad 425 Nailhead engine, optional Lathem blower version, choice of three different rims, full stock or custom interior, detailed engine compartment and opening hood, custom front and rear end treatments and more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The chrome and clear were not factory sealed have been inventoried complete including decals and instructions.

Revell 1959 Ford Fairlane 500 Skyliner Hardtop Convertible, 1/25, H1333

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. 1975 reissue using the original molds from 1958. Kit features detailed Thunderbird V-8 engine and compartment, opening hood, authentic underbody detail with exhaust system and gas tank, front and rear suspension, full interior, driver and passenger figures and the hardtop the retracts like the real car.

Fujimi Supermarine Spitfire Mk.14c V-1 Killer, 1/72, C-10

Plastic Model Kit,   Box Condition: NM

Sold   

This model dates from when Fujimi made the finest models in the world. Beautifully molded and accurate kit. Features very fine all recessed panel lines and excellent detail throughout. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Williams Brothers Le Rhone Rotary Aircraft Engine, 1/8, 301-995

Plastic Model Kit,   Box Condition: Good+

Sold   

Very nicely detailed large 1/8 scale model. Features nine cylinders, crankcase, carburetor with sliding valve, accessory drive gears, oil pump, magneto, full wiring and display stand. The kit has never been started. Internal factory sealed bags including instructions. The 80 hp Le Rhone was developed before WWI and was used in many early aircraft. It did see service early in the Great War and it's follow on, the 110 hp Le Rhone was used in larger aircraft. The crankshaft of the Le Rhone mounted directly to the firewall and was part of the air and fuel intake system. The crankcase, propeller shaft and cylinders all revolved at about 1200 rpm. These three assemblies were carefully balanced to reduce vibration.

AMT 1963 Buick Riviera - 3 in 1 Kit Stock / Custom / Competition, 1/25, 06-553-149

Plastic Model Kit,   Box Condition: Exc

Sold   

Rare original issue hardbox from '63. Can be built stock, custom or competition. George Barris served as the AMT consultant and is credited (with others) for the custom touches possible with this kit. Model includes numerous optional parts for suspension, motor, exterior and interior as well as custom decals. Molded in white, clear, red-tinted clear and chrome with rubber tires. Never started. NOTE: the custom version is missing the custom gas cap and the master cylinder is missing. Inventoried with all other parts, decals and instructions present.

Hasegawa Kugisho P1Y1 Ginga (Frances) Type 11, 1/72, CP1

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. From 1995. Limited edition. Finely molded with all recessed panel lines. Features full interior, optional position bomb bay doors and bomb load. Has decals for two aircraft from 262nd Attach Sq 762 Naval Flying Group and 761 Naval Flying Group.

Pegasus Airco DH5 (DH-5), 1/72, 2023

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. The successful follow on to the DH2 found favor in the ground attack roll due to its high strength. Note the negative wing stagger. Limited production kit. Only 1500 made. Injection molded main parts with many metal details and full decals.

Sterling Stearman PT-17 Kaydet - Control Line Wooden 32 Inch Wingspan Flying Model, C12-795

Wood Model Kit,   Box Condition: Good

Sold   

Big 32.25 inch wingspan kit for control line or RC conversion - .19 to .35 size engines. Features custom spun aluminum cowling, all die-cut and inter-notched plywood and balsa parts, pre-shaped and notched leading and trailing edges, maple motor mounts, wire landing gear, scale wheels, hardware pack, silkspan, big decal sheet and plans with instructions. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they were very complete and well made.

Sierra Consolidated PT-3 Primary Trainer, 1/72, 72-6

Vacuform Model Kit,   Box Condition: Good

Sold   

The PT-3 was the US Army Air Corps Primary trainer, replacing the PT-1 starting in 1928. Very finely molded. Includes metal prop and engine. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

IMC Chaparral 2E, 1/25, 116-200

Plastic Model Kit,   Box Condition: Good

Sold   

Rare. Good kit with nice detail. Features Chevy racing engine, removable rear engine deck, hinged opening doors, front wheels steer, operating airfoil, Firestone low profile racing tires and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

AMT Chevrolet 1964 Corvette Stingray With Trailer - Stock / Custom / Rally, 1/25, 6924-200

Plastic Model Kit,   Box Condition: Exc

Sold   

Can be built one of three ways. Features stock fuel injection or dual quad engine, detailed engine compartment, opening hood, complete interior, Rally insert board, fire extinguisher, clip board, roll bar, seat belts, racing helmet, custom wheel and gauges, stock or 'Shark' custom hood, custom 'GT' louvered rear window filler, stock luggage rack with bed roll and suitcase, full custom grill, side pipes and mufflers, hood scoop, complete trailer and more. Molded in white, clear, chrome plate, red-tinted clear and rubber tires. Includes white wall stickers. The kit has never been started. The 'stock' car and trailer have been inventoried with all parts present and instructions. NOTE: missing custom in-dash television panel and racing gas tank, as well as racing decals.

MPC 1956 1957 Chevrolet Corvette - Bud Anderson Master Kit -Built It One Of Eight Ways, 1/25, 301-200

Plastic Model Kit,   Box Condition: Good+

Sold   

Early 1960s issue that is well detailed - please note old MPC logo. Features all parts required to build stock '56 or '57, Modified Sports Drags, Bonneville Racer, Stock Drag, Rally Car, Road Racer or Custom. Includes one-piece body, detailed interior, underside with full front and rear suspension and driveline, full engine with numerous options, detailed engine compartment with opening hood, choice of hard top, soft top or boot and much, much more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Contrail Curtiss C-46 Commando - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Good+

Sold   

Dated 1975 and contains the production style fuselage along with all other parts. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Monogram Speedee-Bilt Ercoupe, G4

Wood Model Kit,   Box Condition: Good

Sold   

Rare 'Speedee-Bilt' kit from the late 1940s. These were highly prefabricated flying model kits with beautiful, completely finished wings carved from one piece of thick balsa, die-cut, pre-painted balsa parts, colored tissue, plastic details and more. This model features a perfect 'Mono-Foil' factory finished wing, gray painted die-cut parts, gray covering tissue, gray plastic cowling, strip stock as required, rubber motor, die-cut clear canopy material, finished and painted wheels, fully formed wire landing gear, sandpaper, excellent decals, early small Monogram catalog, excellent brochure on how to balance and fly your model and full size plans with step-by-step instructions. The kit has never been started. The small parts are still in the wax paper bag. The other parts are unpunched. The kit is complete with all parts, decals and instructions. Please NOTE the box displays much better than the 'good' grade but is missing the end flaps on the right side.