Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Convair R3Y-2 Tradewind - (R3Y2), 1/168, H178-98

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. 2006 reissue of the 1960 issue with 'Box Top For You To Frame.' The painting is 'Invasion Landing' painted for Revell by Ken Smith. This issue is from the '50 Years Of Revell' series, as Revell celebrated that anniversary that year.

Racoon Model E16A1 Zuiun 'Paul' Floatplane, 1/48, 48-6

Resin Model Kit,   Box Condition: VG

Sold   

From 1985. Very rare and the only 1/48 Paul every produced. Superbly molded in high-definition resin and very well detailed. Features fine recessed panel lines, two piece fuselage with cockpit detail, a separate cowl and engine, cast metal detail parts and more. There is a perfect vac clear canopy that is in mint condition and not even yellowed - there is also a perfect resin form to make more clear canopies if you wish. Has 20 resin and 6 metal parts. The kit has never been started. The parts are still in the internal factory sealed bags and includes a three view drawing, original kit review from that year and a sheet in Japanese.

Revell Apollo Lunar Spacecraft - Large 20 inch Top of Saturn V in 1/48, 1/48, H1838-500

Plastic Model Kit,   Box Condition: Sealed Exc+++

Sold   

Still factory sealed but the seal has a few small splits. 1967 first issue of this fantastic kit in rare sealed condition. Essentially, this is the complete top section of the Saturn V in 1/48 scale. The model has five highly detailed sections which are removable: Command Module, Service Module, Launch Escape Tower, Lunar Module and Apollo Saturn Adapter Section. Stands over 20 inches high when assembled. Two display bases are included for in flight and for lunar landing.

Bandai Mooney Mark 20 / 21E, 1/48, 8530M

Plastic Model Kit,   Box Condition: Exc++

Sold   

Rare. Very nicely molded and highly detailed. Features figures, complete interior, detailed engine and compartment, removable cowling and enough registration numbers and letters for almost any civil aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Sinifer Curtiss SC-1 Sea Hawk, 1/48, SN48005

Resin Model Kit,   Box Condition: VG++

Sold   

Rare. The only 1/48 SC-1 ever produced. Superbly molded in high-definition resin and very well detailed. Features fine recessed panel lines, cockpit detail, a separate cowl and engine and more. There are two perfect vac clear canopies. Includes full decals and even canopy frame decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes detailed instructions, painting and marking guide and decals.

Life-Like USS Constitution Old Ironsides - with Molded Furled Sails - Ex-Pyro, B313

Plastic Model Kit,   Box Condition: VG

Sold   

From quality ex-Pyro molds. This issue was shortly after Life-Like took over as the kit number, box layout, colors and artwork are all from the Pyro kit. Measures 7 inches long when built and features a full hull, fine molded wood detail, 'planked' deck with fine raised lines, separately molded top deck cannons, furled sails and a display stand. For it's time, it was a very nicely molded small model. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Pyro Brig of War American Privateer, C368-75

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Early issue in a hardbox with great artwork. Kit is of the earliest ships built by Yankee craftsman during the Revolutionary War. The ships were speedy and handled so well that the British copied a captured brig. They were well suited to commerce raiding but were not of the size and strength needed to take on Royal Navy units. Nicely molded small scale ship model. Includes full hull, display stand and billowing sails.

Easy Built Models Wright Flyer 1 1903 - Museum Model Series Issue, 1/20, D-10

Wood Model Kit,   Box Condition: Good

Sold   

Very large scale 1/20 wood and tissue model with a 24 inch wingspan. Features two sheets of balsa printwood, factory-cut balsa stringers and spars (strip wood), other balsa stock as required, metal hardware, rigging thread, props, covering tissue and two sheets of plans. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including instructions.

Monogram Slingshot Dragster - For Use With Jetex 50B or CO2 Capsule - 'Four Star' Issue, PC49-98

Plastic Model Kit,   Box Condition: Good

Sold   

Rare. Original issue from 1959. Larger scale model measures 6 inches long when assembled. Features driver, Chrysler dummy engine, six carburetors, drag 'slicks' and pin stripe decals. Includes rope guides and motor mount for powered racing. The instructions provide details on attaching the Jet-X unit to the car. The kit is molded in the correct high gloss dark blue, silver and black. The kit has never been started. NOTE: missing rear push bar which can easily be made from straight stock (the rounded portion is present). Otherwise inventoried with all other parts, decals and instructions.

Aurora Boeing B-17 Flying Fortress, 1/156, 491-70

Plastic Model Kit,   Box Condition: Exc++++

Sold   

Dated 1961. This issue has the oval 'sunburst' logo and a 70 cent price extension, so the actual issue date is probably the mid 1960s. The hardbox has excellent color and gloss, four solid corners and very light wear as shown. The kit is molded in olive drab and clear and contains the correct Aurora 'world' triangle stand. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions. I would have graded this box 'near mint' but it has 3 digits written on the left side of the box.

Monogram Long -John Streamlined Dragster, 85-0544

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. 1998 reissue of the famous 'Four Star' 1950s kit.

Italaerei Dornier Do-24T Seaplane, 1/72, 122

Plastic Model Kit,   Box Condition: VG

Sold   

Very nicely molded and detailed kit with 116 parts. Features all fine recessed panel lines, detailed cockpit, rotating turrets, separately molded elevators and markings for two aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The Do-24 was being built in Holland under license. When the Germans invaded, they found 3 done and 25 in various states of completion. The Air Ministry was looking for aircraft suitable to salvage sunk aircraft, and the Do-24 fit the bill. The American Wright engines were removed and BMWs installed. The Do-24 went on to see successful service in WWII as recon, supply and ambulance aircraft. A squadron was supplied to Spain, and one Do-24 remained operational until 1970.

Hasegawa Kawanishi N1K2-J Shindenkai George - With Resin Wheels And Decals For Four Aircraft, 1/48, JT21

Plastic Model Kit,   Box Condition: Good

Sold   

Includes resin wheel set. Very nicely molded with fine raised panel lines and recessed control surface detail, nice cockpit, good engine and gear well detail, pilot figure, drop tank and optional position canopy. There is a large and colorful decal sheet for four different aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Valom Handley Page Hereford, 1/72, 72035

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed.

Hasegawa Curtiss SOC-3 Seagull with Landing Gear, 1/72, JS057-100

Plastic Model Kit,   Box Condition: Exc

Sold   

Rare landing gear (no float) version. Markings for hi-vis paint job. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Italeri Ju-88 A-17 Torpedo Bomber, 1/72, 038

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed.

Pyro Elsie Gloucester Fisherman, C259-100

Plastic Model Kit,   Box Condition: Exc+

Sold   

Dated 1966. Early hardbox issue with AJ Rudisill artwork. There is no scale listed, but the kit is just over 8 inches long when assembled. Full hull kit includes good deck detail with many separately molded parts such as lifeboats, hatches, windlass and much more, billowing sails and display stand. Molded in white and light wood tan. The kit has never been started. It has been inventoried complete with all parts and includes instructions. This is one of the 'intermediate' line of Pyro ship kits, which were first called '$1.00 Models' and in 1967 were renamed '$1.25 Models.' All were roughly the same size and were a significant increase in detail from the '50 Cent Models.' (later called 74 cent models). Kits in the $1.00/$1.25 line (by 1967) included the Skipjack, Cutty Sark, Charles W. Morgan, HMS Bounty, HMS Ark Royal, USS Constellation, British Bomb Ketch, Chinese War Junk, Elsie - Gloucester Fisherman, Henri Grace A'Dieu, Dutch Staten Jacht, Gotta Le Jon and others. 50 Cent/75 Cent kits in 1967 included the Mayflower, Barbary Pirate, USS Constitution, Santa Maria, Golden Hind, Half Moon, Bon Homme Richard, Brig of War, HMS Victory, Flying Cloud, Nina, Pinta, Santa Maria, La Reale French Galley, Venetian Carrack, Roman Merchant, Spanish Galeon and others.

Heller Dewoitine D-510 - French Air Force 1st Escadrille GC I/8 or 3e Escadrille GC II/1, 1/72, 219

Plastic Model Kit,   Box Condition: VG

Sold   

1970s 'Black Box' style issue that still retains the 'L' style box art. Very nicely molded with recessed control surfaces and fine raised panel lines. Includes markings for the two aircraft listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Heller Dewoitine D-500 or D-501 - 1 Escadrille GC 1/4 or 4 Escadrille GCN II/4, 1/72, 209

Plastic Model Kit,   Box Condition: VG+

Sold   

1970s Heller issue with 'Black Box' design that has black background on the box top and all 4 sides. Very nicely molded with recessed control surfaces and fine raised panel lines. Includes parts for the '500 or the '501 and markings for the two aircraft listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The D-500 was the result of Programme C-1 in 1932 that was destined to replace the obsolete French fighter fleet. In November of 1933 the D-500 was chosen from the competitors, and this established the reputation of the Dewoitine company. The D-500 was made entirely of metal and fitted with a Hispano-Suiza 12 cylinder engine and a turbo-compressor. It was armed with 2 Vickers machine guns on the cowling and 2 Darne machine guns on the wings. The D-501 was a variant of the D-500 that arried a motorized cannon. The HS-59 20mm cannon and the 2 Mac 34 nacelles replaced the weapons of the '500. The propeller was also changed and lost the streamlined nose cone. Total production of both types was 257 aircraft. At the start of WWII, 43 D-501 fighters were still in front-line service.

Italeri Chinook CH-47 C/D (HC-1) Heavy Transport Helicopter - RAF / USA / Australia / Italy, 1/72, 064

Plastic Model Kit,   Box Condition: Good-

Sold   

Very highly detailed kit from newer molds. Features complete cockpit, full cargo interior, optional position loading doors with ramps and decals for the helicopters listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.