Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.

Airfix Fairey Firefly 5, 1/72, 02018

Plastic Model Kit,   Box Condition: Sealed NM


Still factory sealed. 1986 issue from the excellent original 1960s molds. Nicely detailed for that time and features a very good interior interior, 3 part canopy, folding wings, moving ailerons, optional position landing gear, rotating wheels and prop and full under wing stores. Inventoried 100% complete with all parts, decals and instructions.

Hasegawa Ki-44 Shoki 'Tojo' Shinten Seikutai, 1/72, AT102

Plastic Model Kit,   Box Condition: Sealed VG++


Still factory sealed. Limited edition dated 1994.

Tamiya M16 Multiple Gun Motor Carriage - With 3 Figures, 1/35, MM181A

Plastic Model Kit,   Box Condition: Good-


Very well detailed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Atwood Wen-Mac Outboard Motor NOS

Metal Model Kit,   Box Condition: Good-


Very rare in this condition. This motor appears to be NOS - new old stock, never run. It came from a collection where nothing was ever run or built. The motor has never been mounted and even the pull-string for the starter is clean and factory-new. The red anodizing on the top is in amazing 'near mint' condition as is the rest of the motor as well. The original box is not present.

ITC The Yacht Atlantic, 1/96, 3719

Plastic Model Kit,   Box Condition: VG


Rare model kit from the late 1950s/early 1960s. Big-scale measures 28.5 inches long when assembled. It was well detailed for that time and comes with rigging instructions and preformed billowing sails. Molded in black and wood tan. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Entex RMS Titanic Ocean Liner - (ex-Revell), 1/350, 8509

Plastic Model Kit,   Box Condition: Good-


Large and highly detailed kit measuring over 30 inches long when built. Originally from Revell molds, which then went to Minicraft/Academy. Just about every aftermarket photo-etched accessory (From Gold Medal Models [GMM] and Tom's Modelworks) you can imagine is available for this kit, so you can create a museum masterpiece if you wish. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

MRP Electric Outboard Motor 3 Time APBA National Champion Powerplant - Mercury / Evinrude / Johnson, 10-3500

Metal and Plastic Model Kit,   Box Condition: VG++


Very rare and powerful engine that won three national championships. This is the first version with the beautiful, all metal factory-built drive and prop section.. MRP stood for Model Racing Products and they were well known for performance and engineering. This is a complete outboard with all parts - nothing left to buy. Features a large 550 class MRP Wizzard 12V MS-1 pre-wired motor with suppression capacitor installed, high speed prop factory assembled to the drive shaft system, motor mounting plate, all drive and misc. hardware, vacuform upper and lower housing, decals for three different major outboard manufacturers and more. The small parts are still factory sealed. The few parts that were not sealed have been inventoried complete with instructions. This is a very simple build and an excellent outboard. Measures about 8" overall height, 4" long (top cover) and about 2" wide (top cover). NOTE: the instructions are from the second version. This is a very simple build but there are minor differences between this kit and the instructions.

Dumas 12 Volt 2 Amp Electric Motor For Model Boats 25 to 40 Inches Long - Single or Dual Geared Prop Drive, 2005

Metal Model Kit,   Box Condition: VG++


Never used and mint in the box. This is a 12 V 2 Amp, large electric motor that can be used to drive a huge variety of props and geared props on electric R/C or free running boats. This large motor is Dumas #2005 and measures just over 1.5" in diameter and is 2.25" long. Includes a universal coupling for motor and drive ends, a universal coupling, hardware, strap-style motor mount and rubber strap strip as well as very complete detailed instructions (4 full pages to show all the options).

Dumas Running Hardware Kit For Prime Time Yacht Dual Motor Drive, 2360

Metal Model Kit,   Box Condition: VG


Very rare. The optional running hardware set includes (2) shafts, (2) stuffing boxes, one 3-blade left-hand and one 3-blade right-hand props, (2) brass drive dogs, (2) brass rudders and shafts, (2) coupling sockets, (2) coupling rods, (2) jam nuts, (1) single rudder arm, (2) double rudder arm and nylon washers. The shafts and stuffing boxes were never sealed and are complete and as new. All other parts are still in the factory sealed.

Dumas Running Hardware Kit For Mister Darby Tugboat Twin Motor Installation, 2340

Metal Model Kit,   Box Condition: Good


Rare. Includes (2) SS drive shafts, (2) stuffing boxes, one left and one right hand bronze props, left and right hand bronze prop struts, mounting plate, (2) driving pinion assembly, (2) driven gear assembly, (2) brass drive dogs, (2) set collars and misc. fasteners. Never used. Many parts are still factory sealed, the others have been inventoried complete including instructions/plans.

Revell The Baron And His Funfdecker Fokker Deals Wheels - Young Model Builders Club Issue, 703

Plastic Model Kit,   Box Condition: Good


Rare issue dated 1973. Molded in red and chrome with very funny instructions. There is no assembly but NOTE: the stickers have been neatly and correctly applied. Inventoried complete with all parts and instructions. Chrome parts are in 'excellent' condition.

Midwest 850 MEPS-II Marine Electric Motor And 851 MEPS-II Speed Control Unit

Metal Model Kit,   Box Condition: Exc+


Includes both accessories in mint, never used condition. #850 is a low current 5 pole marine motor with direct drive, wire leads, full noise and arc suppression capacitors all prewired. It is designed for simple bulkhead mounting using one 3/8-16 nylon nut (supplied). It even includes a pre-drilled plywood motor mount. The length is 3 5/32", diameter is 1 13/32. Weight is 6 oz and the output shaft is 1/8" diameter. It is rated for 6 to 26 volts at 1.29 amps. Maximum efficiency is at 15 volts and 1.29 amps. Recommended for 30" to 36" boats. With instructions. The speed control unit is pre-wired and of the step switch type. It has two forward speeds and two reverse and mounts on top of a servo - very simple mounting and operation. With a fuse holder, two amp fuse and full instructions.

Sterling Century Sea Maid 20 With Rare B8F Fittings Set- 27 Inch Long Boat For R/C Or Scale Display, B-8M

Wood and Metal Model Kit,   Box Condition: VG


Includes the optional and rare cast metal fittings set B-8F for this kit. The model is part of a very famous series of scale, operating wooden cruisers and yachts from Sterling. The Century Boat Company Sea Maid features an entire covering of mahogany for the hull, diecut and embossed deck, die-cut mahogany sides, bottom, transom, bang rails and inner walls, inter-notched self-aligning constructions, die-cut balsa bulkheads, keep, frame, members, etc, die-cut plywood firewall, motor mount bulkheads and more, poplar motor mounts, plastic windshield, decals, yachting ensign, printed instrument panel, marine hardware including shaft, stuffing box, power propeller, nuts, bolts & rudder, dowels, die-cut and shaped seats, large detailed step-by-step drawings and instructions, complete radio control installation and rudder escapement and more.

Glencoe Pfalz D-III and Two Toms PE Detail Sets - With Decals for 9 Aircraft, 1/48, 05115

Plastic Model Kit,   Box Condition: VG+


Includes Tom's Modelworks #202 German Interior Detailing Set in PE brass and #209 Pfalz D.III and D.IIIa PE detail set (two frets) designed for this kit. Both are complete and never used and include instructions. The actual kit is cleanly molded with recessed and raised detail. Includes a very large and colorful decal sheet for Ltn Klein Jasta 10, Vzfw Hegeler Jasta 15, Ltn Wunsch Jasta 22, Flugmaat Undiener Marine Field Jasta III, Ltn Gustav Beller Jasta 10, Ltn Lenz Jasta 22, Ltn Hans B. von Buttlar Jasta 18and Ltn Fritz Hohn Jasta 21. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box artwork for this kit was done by Charles Sterns. He was a very prolific model builder and painter. Besides several Glencoe kits, one of his many paintings can be seen as the cover art for Over the Front magazine, 1992: Volume 7, Number 2.

MPC Titan IIIC Missile With Boosters, 1/100, MPC790-6

Plastic Model Kit,   Box Condition: Good-


NOTE: builder kit only, please read carefully. Modern reissue from the original molds. Makes an ideal for a desktop model, measuring 12.5 inches tall when assembled. Includes clear nose so you can see the four satellite payload. Has all boosters and detachable 2nd and 3rd stages with rocket engines. The kit is complete with all parts, decals and instructions but NOTE: this kit has neat assembly. The three main tanks and nozzles are built to 'excellent' quality; the first and 2nd stages are glued together. There is no other assembly and zero painting. Please note, the original version could be flown or built as a scale model; this version is a scale model only.

Aoshima IJN Destroyer Kagero, 1/700, WLD033-100

Plastic Model Kit,   Box Condition: VG++


Very highly detailed waterline small scale (1/700) model. This kit has never been started. It is either still in the internally sealed factory bag or has been inventoried 100% complete with all parts, decals (if supplied) and instructions.

Jo-Han 1970 Oldsmobile Cutlass 442 Stock or Custom, 1/25, C5070

Plastic Model Kit,   Box Condition: Good


Nice kit of this classic Oldsmobile body style. The smooth lines of a '70 Cutlass or 442 looked good from any angle. Features custom and stock parts, detailed engine and engine compartment, opening hood and full interior. Molded in white, chrome plate, clear, red-tinted clear and with rubber whitewall tires. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Bandai Mobelwagen Flakpanzer IV, 1/48, 8285

Plastic Model Kit,   Box Condition: Sealed Mint


Still factory sealed. Rare kit that is part of the classic and highly detailed 1/48 Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be posed in almost any position.

Dumas PT-109 Display Hardware Set Bagged

Metal Model Kit,   Box Condition: Sealed


Still in the factory sealed bag with header. This is scale display running hardware for the Dumas PT109 and includes three brass prop shafts and (3) cast metal rudders, (3) cast metal shaft supports and (3) 1" diameter cast metal props.

Pyro Saint Louis French Man-O-War 1626, C210-300

Plastic Model Kit,   Box Condition: Good++


Rare Pyro kit from the late 1960s. Large scale - measures about 14 inches long when assembled. Nicely molded and detailed and features over 200 parts with individually molded cannon, cradles and cannon hull hatches, numerous deck fittings, pre-molded rat lines, billowing sails, blocks and an actual built-up kit photo for use in rigging the ship. The kit has never been started. Inventoried 100% complete including instructions. In 1642 when Richelieu came to power in France, the country did not have a single ship that could compare with the English and Dutch Men-O-War. To rectify this, Richelieu purchased a few ships from Holland. His engineers studied these then built the Saint Louis. The ship had two gun decks and about 60 guns. She was rigged with a modern spiritsail, topsail and mizzen topsail. Pyro did not cut molds based on popularity, but usually by the historical significance of the subject. This was not a good injection-molded model business practice, but many collectors and builders are grateful today for these kits.