Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Airfix Scottish Aviation Bulldog - Primary Trainer Swedish Air Force or RAF - Blister Pack, 1/72, 01061-8

Plastic Model Kit

Sold   

Still factory sealed. Dated 1973. Very nicely detailed model of this RAF trainer. Includes color paint guide and decals for both air forces.

Airfix Beagle Basset 206, 1/72, 255

Plastic Model Kit,   Box Condition: Good++

Sold   

1960s issue of the famous light aircraft of RAF Transport Command. Features complete interior detail. Never started. Inventoried 100% complete with all parts, decals and instructions.

Pavla Bell 47D / 47G / Helicopter - Royal New Zealand Air Force (RNZAF) - USAF MASH Korea 1951 or H-13H Ft. Rucker Alabama 1958 - Armed Forces of Malta, 1/72, 72005

Multimedia Model Kit,   Box Condition: VG

Sold   

Detailed kit consists of injection molded parts, a large fret of photoetched parts (including the boom), metal wire, film instruments and decals for four helicopters including a MASH unit in Korea. The kit has never been started. Internal factory sealed bag including decals and instructions.

Sterling 2-32 Schweizer Sailplane - 42.75 Inch Wingspan For Tow Line or R/C, A27

Wood Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. From the late 1960s/early 1970s. Very nicely produced stick-and-tissue glider than is designed for tow line or radio control. Features quality die-cut balsa parts, stripwood and spars, a perfect-condition clear vac canopy, factory-finished hard-wood nose cone, finished wheel, a large, full color decal sheet that includes full side strips as shown, coving tissue and excellent full size plans with detailed instructions. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be 'deluxe' as they had the action features and were much nicer than most other kits of this type.

Aurora 106-100 Fokker D-VII (D-7) / 101-100 Nieuport 11 / 134-79 Fokker Eindecker, 1/48

Plastic Model Kit,   Box Condition: Sealed Mint to Fair

Sold   

SALE!! Includes all three kits. The D-7 is still mint and factory sealed. The Nieuport has never been started. It has been inventoried complete with all parts and includes decals and instructions. The decals have bug damage, but to the edges only. The actual transfers are fine. The Eindecker has never been started and the airplane is complete - but NOTE, the kit is missing the ground base and small name plate for the ground base. With decals and instructions.

Revell Focke Wulf FW-200 C-5/C-8 Condor, 1/72, 04387

Plastic Model Kit,   Box Condition: Good+

Sold   

Dated 2006 - kit is from new molds. Well detailed with over 200 parts. The kit has not been started. NOTE: missing missiles. The airplane is complete with all parts, decals and instructions.

Revell USS Ward DD-139 Destroyer, 1/240, 5023

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed but the seal has many splits. Well detailed, large scale full-hull model measures 15.75 inches long when assembled. The Ward was a Wickes-class 1247-ton destroyer launched in 1918 . After serving as a station ship during the first trans-Atlantic flights of NC-1, NC-3 and NC-4 in 1919, she came back to the Pacific and was decommissioned there in July 1921. In 1920 the ship received the hull number DD-139. On the morning of December 7, 1941, the Ward was on patrol just outside Pearl Harbor. She spotted and sank Japanese Midget Submarine and fired the first US shots of WWII. The Ward saw extensive activity through the war as a transport in most of the major battle areas of the Pacific as a fast transport. During the Leyte operations she took a Kamikaze hit amidship and the crew had to abandon her. The destroyer USS O'Brien had to sink the Ward with gunfire. The Commanding Officer of the O'Brien was William W. Outerbridge, who had been in command of Ward off Pearl Harbor on that fateful day. The date that she was sunk was December 7th, 1944, three years to the day of her opening shots.

Airfix Wasa Swedish Warship, 1/144, 09256

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. Large scale highly detailed kit of the famous sailing ship. Nicely molded. This kit has 229 parts and includes full rigging instructions and vac billowing sails.

Revell B-1B Lancer - (ex-Monogram), 1/72, 04307

Plastic Model Kit,   Box Condition: VG++

Sold   

Very good quality kit from the original Monogram molds. Features operating swing wings and stabilator, detailed undercarriage, wheel wells and full cockpit. With 17 cruise missiles and a crew of 4. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

MPC 50041-50 Spad VII / 5003-50 De Havilland DH-4 / 5005-50 Avro 504K - (ex-Airfix), 1/72

Plastic Model Kit,   Box Condition: Exc

Sold   

SALE!! Includes all three early 1970s kits from quality Airfix molds. They have not been started. All three have the parts still in the factory sealed bags and are complete with decals and instructions. NOTE: the Spad and DH-4 decals are lifting, which is typical of these MPC kits.

Revell 3 Famous Fighters of WWI / Sopwith Camel / Turkish Fokker E-III / Morane Saulnier N, 1/72, H676-130

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still in the factory seal. 1967 two-piece box issue includes all three aircraft and decals for the box art shown. Includes unusual 'German in Turkish service' (large black squares) national insignia for the E-1.

Lindberg Motorized American Lafrance 900 Pumper Fire Truck, 1/32, 6101M-150

Plastic Model Kit,   Box Condition: Good

Sold   

1968 hardbox issue that is motorized. Nicely detailed for that time and molded in red and clear. Never started. The motor is still factory sealed and all other parts have been inventoried complete including decals and instructions.

Pyro Laird-Turner Pesco Special, 1/32, 341-149

Plastic Model Kit,   Box Condition: Good-

Sold   

From the large-scale Thompson Trophy Racer series from the late 1950s/early 1960s. Features rotating prop, steerable tail wheel, moving elevators, rudder & ailerons and a 'good' cockpit detail including pilot, seat and instrument panel. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Quality Craft Models Lehigh Valley AAR Steel Sided Caboose - Brass HO Craftsman Kit, 1/87, 349

Wood and Metal Model Kit,   Box Condition: Exc++

Sold   

Unusual kit that is primarily brass. Builds a very detailed prototype. Features two large sheets of photoetched brass which includes car sides, ends, roof, doors, cupola and more, cast white metal fittings, hardwood parts that are completely cut and milled to shape, detailed instructions and plans and very complete decals. The kit has never been started. The small fittings are still in the factory sealed bag. The parts that were not factory sealed have been inventoried complete including decals and instructions. Long after manufacturers turned to plastic ready-to-run rolling stock, Quality Craft continued to produce high quality models you could build. Headquartered in Northumberland, PA, they gave the craftsman an opportunity to build a state-of-art kit and show their skill.

AMT 1961 Lincoln Continental Convertible 3 in 1 - (In a Hardtop Box), 1/25, K411

Plastic Model Kit,   Box Condition: Good

Sold   

Rare first issue. Can be built one of three ways - Stock, Prestige Car (with Government decals) or Custom. Includes numerous additional parts for the custom version as well as 'show' chromed brake drum, 3 trophies and much more. Features full interior, rotating wheels, exhaust and underside detail. Even includes the 'wall display shelf' that AMT issued for a short time. Molded in white, clear, red tinted clear, and chrome. With real rubber tires. The kit has never been started. Inventoried complete with all parts, decals and instructions. NOTE: this is a convertible in a hardtop box; the instructions are for a hardtop also but are little different for the convertible. I don't know if this was an AMT error or if the box was recycled.

Hasegawa Lockheed P2V-7 Neptune (P-2H P2V7) - US Navy / French / Japanese Markings, 1/72, JS082

Plastic Model Kit,   Box Condition: Exc

Sold   

Very nicely detailed and molded. Contains markings for all variants and optional top gun turret. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Testors Northrop YF-23 ATF, 1/72, 657

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Very finely molded and detailed. Features detailed cockpit and gear wells, optional position canopy and landing gear, internal weapons stores and optional position weapons doors.

AMT TWO CARS 1929 Ford Model A Roadster Mod Rod With Special Feature Mod Poster - Stock / Ala-Kart Street Rod / Competition Rod / Early Rod / Early Custom, 1/25, 2129 T254-200

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. The side says "BUILT TWO COMPLETE CARS" and "Special Feature 11"x17" Full Color 1929 Mod Poster" which I assume is inside. Very nice models that can be build two of the six ways listed. Features detailed engine, removable hood, full interior, optional raised or lowered top, a very large number of custom and optional parts and more.

AMT 1940 Ford Sedan Joker 3 In 1 - Stock / Custom / Competition, 1/25, 2440-200

Plastic Model Kit,   Box Condition: Good+

Sold   

Can be built one of three ways. Includes Ford or Oldsmobile engines and many power train and accessory options. Molded in white, clear, chrome and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Graupner Lotse Yacht - 20 Inch Long RC Ship, 2164

Wood and Plastic Model Kit,   Box Condition: Good

Sold   

NOTE: excellent builder kit, please read carefully. Very nice German 'Quick Kit' with all pre-formed parts. Designed for radio control. Features ABS hull, superstructure and deck, die cut plywood parts, plastic and metal fittings, clear windows, \motor drive unit and more. Standard functions are rudder, forward/stop/reverse (RC tx and rx not included). NOTE: this kit has very neat assembly. The quality of assembly will appear in parenthesis after each description. Built: internal framing and motor mount and motor to hull ('professional' quality) - drive unit and rudder ('professional') - deck to hull ('professional'). There is no other assembly and zero painting. The kit has been inventoried and is missing the building stand (plywood), one of two #15 battery trays and the flat radar dish. Otherwise includes all other parts, instructions, plans and decals.