ICM Mig-29 '9-13' - Soviet Frontline Fighter, 1/72, 72141
Plastic Model Kit, Box Condition: Sealed Good
$16
Still factory sealed. From new, well-detailed moldings with 82 parts.
Accurate Miniatures RAF Mk-1A Mustang - (P-51) Allison Powered Recon/Fighter with 20mm Cannons, 1/48, 3410
Plastic Model Kit, Box Condition: Sealed Exc+
$29
Still factory sealed. Highly detailed kit with over 60 parts, recessed panel lines, complete cockpit, full wheel wells and optional weighted tires.
KVZ Tupolev Tu-154 Aeroflot, 1/100
Plastic Model Kit, Box Condition: Sealed Exc+
$125
Still factory sealed. Soviet Tri-Jet design in Cold War Aeroflot markings. Large 1/100 scale model has raised and recessed panel lines and is molded in clear, white, black and silver. Features large colorful decal sheet and good overall surface detail. KVZ was the name used by this East German kit manufacturer from 1969 to 1973. During this time, some fantastic Cold War kits were produced of Russian Airliners and Military Helicopters and Aircraft.
RCM Spitfire Mark IX, 1/32
Vacuform Model Kit, Box Condition: Bagged
$89
SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.
Topping Martin GAM-83A (AGM-12B) Bullpup Air-to-Ground Missile
Plastic Model Kit, Box Condition: Bagged
$365
Rare Factory/Desk Promotional model produced by Topping for Martin. Missile measures 8 inches long. Condition is exceptional. Missile is 'mint' and base is 'near mint ++.' Correct stand says 'Martin GAM-83.' There are no repairs, no touch-ups and no cracks. Shipping insurance is required.
Airfix Saab J-35 Draken, 1/72, 02039-4
Plastic Model Kit, Box Condition: Good
$18
Type four logo issue. Nice older kit. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Britavia Models Westland Dragonfly H.R.3 - (HR3 S-51) - Bagged, 1/72
Vacuform Model Kit, Box Condition: Good
$32
The Dragonfly was a license built version of the Sikorsky S-51. First flight was in 1946 and power was a Pratt & Whitney Wasp Jr. High quality kit that is well molded. Main parts are molded in clear for realistic windows and it includes many metal details such as nose wheel and strut, two main wheels and struts, rotor head, tail rotor, pilots seat, instrument panel, rear bench seat, tail rotor guard and winch. Has full decals for two aircraft including one stationed on HMS Bulwark in 1955. One set is for a dark sea grey aircraft and another with a lighter sky finish. Never started. The metal parts are still in the factory sealed bag and the other parts have been inventoried complete with decals and instructions.
Monogram Orient Express Hypersonic Airliner, 1/200, 1130
Plastic Model Kit, Box Condition: Exc
$55
Hard-to-find kit from 1988 of the proposed hypersonic airliner. Features very nicely molded aircraft, special display stand and full color decals for the box cover paint scheme. The kit has never been started. Internal factory sealed bag including decals and instructions.
Hasegawa Boeing P-12E - USAAF 8TH / 16TH / 27TH / 95TH Pursuit and Attack Squadrons, 1/32, JS061-600
Plastic Model Kit, Box Condition: Good+
$32
Highly detailed. Has decals for all four aircraft from the squadrons listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Matchbox Spitfire Mk.22 / 24 - RAF or Egyptian Air Forces, 1/32, PK-501
Plastic Model Kit, Box Condition: Sealed Exc
$69
Still factory sealed. Still the only 1/32 scale kit of the last and fastest production Spitfire. Cleanly molded with recessed panel lines. Features full cockpit, detailed Griffon engine with removable panels, sliding canopy and decals for RAF 80 Squadron Kai Tak Hong Kong 1950, Royal Egyptian Air Force and 603 'City of Edinburgh Squadron 1950.
Artesania Latina Bensersiel Krabenkutter (Crabbing Cutter), 1/20, 20202
Wood and Metal Model Kit, Box Condition: VG+
$165
From 1986. Huge, giant-scale plank-on-frame kit with full fittings set. Measures 71 cm (~28 inches) long when built. The kit has never been started. Many of the small parts and even some of the wood is still in the factory sealed bags. The fittings and parts that were not factory sealed have been inventoried complete. Includes a huge set of plans with numerous detail drawings.
Monogram TWA Douglas DC-3, 1/90, PA9-98
Plastic Model Kit, Box Condition: Sealed Exc++
$145
Still factory sealed but the seal has drawn the box top slightly concave. Second issue dated 1955; the first issue has same art but kit #P9-98. The box has as-new color and gloss. Kit features optional position cabin door, rotating propellers and wheels, pilot, copilot, hostess and passenger figures and colorful TWA decals.
RCM Blohm & Voss BV-238 Flying Boat, 1/48
Vacuform Model Kit, Box Condition: Bagged
$107
SPECIAL ORDER vacuform drape-molded kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.
Airmodel Grumman AF-2W or AF-2S Guardian - Bagged, 1/72, 165
Vacuform Model Kit, Box Condition: Bagged
$18
Well molded basic vac kit with all recessed panel lines, clear canopy and instructions. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Lindberg Dornier Do-335 Arrow, 1/72, 438-50
Plastic Model Kit, Box Condition: Exc++
$22
1966 hardbox issue with Tom Morgan boxart. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Revell Boeing 707 / 307C Luftwaffe, 1/139, H108
Plastic Model Kit, Box Condition: Exc+
$59
Rare 1971 Revell of Germany issue. Never started. Features moving rudder, optional position cabin crew/passenger boarding doors, detailed engines and full landing gear detail. The kit is mint inside - all parts, decals and instructions are still in the factory sealed bag.
AMT 1995 Chevrolet Corvette Convertible, 1/25, 6538
Plastic Model Kit, Box Condition: Sealed VG++
$20
Still factory sealed. Features detailed 300hp LT-1 engine, detailed engine compartment, opening hood, full interior and underside details. Build as stock or customize with optional wheels and side exhaust. Over 90 parts molded in color, clear and with plated and rubber parts.
Hasegawa Sopwith Camel (F.1 Camel) Museum Model, 1/8, CP-02
Plastic Model Kit, Box Condition: Sealed Exc+++
$1750
Still factory sealed but the seal has splits and tears. Very rare and large 1/8 scale museum quality kit. The three 1/8 aircraft in this series are widely considered to be the finest model aircraft ever produced. This kit duplicates the classic Sopwith Camel using many of the original material in a near perfect representation of the inner structure of the aircraft. There are 1,198 parts made from die-cut plywood, Japanese cypress, cast soft metal, brass, aluminum, rubber, injection molded plastic and many other materials. The wingspan is 1067mm (42 inches) when assembled. The engineering of the kit is world-class right down to the assembly plans. Please note, this item must be shipped insured.
Revell HMS Bounty - MGM 'Mutiny On The Bounty' Movie Box with Marlon Brando and Trevor Howard, 1/110, H326-298
Plastic Model Kit, Box Condition: VG++
$125
The famous mutiny ship of Captain Bligh and Fletcher Christian fame. Rare 1961 hardbox issue with fantastic John Steel artwork and MGM Studios 'Mutiny on the Bounty" movie promotion side panels and photos of Marlon Brando and Trevor Howard. Revell's early ship models were remarkably detailed and this kit is no exception. Features full hull, detailed deck and all fittings, preformed ratlines, vac sails, full rigging instructions and more. The kit has never been started. Inventoried 100% complete including decals and instructions.
AHM P-51D Mustang Racer Miss America, 1/87, SK-11
Plastic Model Kit, Box Condition: Sealed NM
$32
Still factory sealed. HO scale kit. Very nicely molded and detailed with full color decals, movable control surfaces, colorful decals and full color painting guide.