Azimut Productions 4.7cm PAK (t) auf G.W. R-35 - Ironsides Series, 1/35, AZ1002
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed.
Verlinden XM706 E2 Armored Patrol Car - US Air Force Vietnam, 1/35, 369
Resin Model Kit, Box Condition: Exc
Sold
Rare and widely considered the finest model available of this unusual subject. Features high-definition resin castings, superb one-piece hull, photoetched metal details, scale brass mesh screen, metal stock and illustrated instructions. The .50 Caliber Machine Gun is so detailed that it is almost a kit to itself. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The large parts were not factory sealed have been inventoried complete including instructions. Please note that Verlinden did not furnish decals with this model.
Revell Arado Ar-196 B - Single-Float Seaplane - Aircraft V-4 D-OVMB 1938 (Ar196B), 1/32, 04922
Plastic Model Kit, Box Condition: Sealed VG++
Sold
From 2015. Large-scale early Arado with unique centerline float configuration features 190 pieces, fine recessed panel lines, incredibly well detailed internal tubular space frame, full cockpit and crew station, optional position canopies, detailed firewall, excellent complete engine with full exhaust, optional position cowl hatches with supports to show the engine, separately molded control surfaces, optional folded wings, individual navigation lights, bomb load and much more. Includes display stand and decals for the aircraft listed in the title.
MPC Blue Max Funny Car - Long Nosed Mustang, 1/25, 1-2709
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed and in investment-grade 'Near Mint' condition. Rare one-and-only issue and even harder to find in this condition. Features tubular frame build up just like the real race car, detailed 436 Hemi engine with blower, headers, roll cage, hollow drag slicks rear tires and Denman front tires; one piece long-nosed Mustang body with rear spoiler, detailed driver figure, large opened drag chute or closed 'chute pack.
MPC Flip Out Mustang Street Racer - (Flipout), 1/25, 1-0742
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. Rare model from 1978 and well detailed for that time. Features custom tilt forward front end, detailed racing chassis, Ford 427 CID V8 engine with dual quads, roll cage, side pipes and full interior. Never started. The parts that were factory sealed are still in factory sealed bags. The parts that were never factory sealed (chrome and clear) have been inventoried complete. With instructions and decals.
Revell Chromed Dragster Frame, 1/25, C1130
Plastic Model Kit, Box Condition: Exc
Sold
Rare. Early to mid 1960s 'Custom Car Parts' issue in a very narrow box with a clear cello insert so you can see the parts and a header for hanging. Never used and complete with all parts and instructions (on the back of the box). Please note this is the issue with the parts against a black background. The other issue had the parts displayed against a yellow background.
Revell Dragster Frame, 1/25, C1122
Plastic Model Kit, Box Condition: Exc
Sold
Rare. Early to mid 1960s 'Custom Car Parts' issue in a very narrow box with a clear cello insert so you can see the parts and a header for hanging. Never used and complete with all parts and instructions (on the back of the box).
Nichimo Hughes H500 Helicopter - (H-500 Hughes 500D), 1/20, S-2003
Plastic Model Kit, Box Condition: Good++
Sold
Rare. Very large 1/20 scale and widely considered the finest injection molded civil helicopter kit ever made. Deluxe multi-media action kit with many metal, plastic, rubber and other parts. Features super detailed cabin down to the seat belt buckles, complete engine which can be installed or displayed on the included engine stand (the engine is a model unto itself), detailed rotors/hub assembly and more. Has fully motorized main and tail rotors with transmission boxes (Mabuchi 280 motor is not included). Main landing light is lit. Includes a display/battery base and a unique four control wired remote control for the lights and rotors. Includes four positionable action figures and a large decal sheet and color painting guide for 5 helicopters including one of USA registration. Never started. The special internal cardboard presentation pieces are all present and excellent. All of the small metal and hardware parts are still in the factory sealed bag. All other parts have been inventoried complete and includes decals and instructions.
Scalemaster British SE-5a Fighter - 19.31 Inch Wingspan Flying Aircraft, 1/16, SM-1
Wood Model Kit, Box Condition: Good
Sold
Rare model from 1948. Scalemaster Model Inc was located at 28 Ionia Avenue S.W. Grand Rapids, Michigan and they produced higher end models. This is higher-end kit featuring quality printwood, factory-cut spars and stringers, fully finished wooden wheels, nose block, covering tissue, full color waterslide decals and two sheets of full size plans. Never started and inventoried 100% complete.
Frog De Havilland DH-110 - (DH110 Sea Vixen), 1/72, 325P
Plastic Model Kit, Box Condition: Good
Sold
Rare 1950s issue of the early Sea Vixen. Features fine raised surface detail, complete landing gear and the famous round-based clear two-piece Frog stand. Includes glue capsule. Never started. Inventoried and includes all plastic parts, decals and instructions but NOTE: missing two metal nose weights.
Academy UH-60A Blackhawk, 1/48, FA034
Plastic Model Kit, Box Condition: VG+
Sold
This is detailed model that features very fine recessed surface detail, complete cockpit and cabin interior, optional position doors, missile payload and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya German Assault Troops Infantry, 1/35, MM130
Plastic Model Kit, Box Condition: Good+
Sold
Includes 8 soldiers in action poses as shown and numerous accessories also. Never started. Inventoried with all pieces present and includes decals and a full color painting/assembly guide on the back of the box.
Tamiya M5A1 US Light Tank, 1/35, MM197
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Excellent, well detailed armor model.
Monogram Devastator TBD-1 - VT-2 Lexington 1939 / VT-6 Enterprise 1939 / VT-8 Hornet 1941 / VT-6 Enterprise 1942, 1/48, 7575
Plastic Model Kit, Box Condition: Fair
Sold
1974 'short box' second issue. Well detailed for that time featuring complete interior, folding wings, elevating and rotating tail gun, prop and arresting gear, optional position gun compartment doors, canopy, parts for bomber or torpedo versions with markings for three aircraft including the yellow-winged pre-war versions and Torpedo 8 from the Battle of Midway. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Eduard Fw-190A JG 54 Grunherz Dual Combo - Contains Two Kits, 1/48, 1155
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed limited edition containing two complete models and many extras. Features parts to build A-5, A-6 and A-8 versions, Eduard Masks and Photo Etched details and more. Also includes a 1.8cm dress pin. With paint guide and markings for 10 different colorful aircraft.
Palmer Naval 24 Pound Cannon Brass Plated, 1/24, 27
Plastic Model Kit, Box Condition: Good-
Sold
This large-scale model was designed from official photos. Includes rope, metal chain, and parts molded in wood tan, steel (silver) and brass plate. The brass tree includes the barrel and fittings. The kit measures about 6 inches long assembled. Never started. Inventoried with all parts, chain, rope and instructions present. Palmer made a range of five field gun kits which included the Gatling Gun, Civil War Field Piece, Revolutionary War Cannon, Naval Cannon and 75mm World War I Artillery Piece. The original issues contained brass plated parts and chain or rope as necessary. The economy line was issued without brass plating or chain. Finally, there was a deluxe series that included extra parts such as limbers, carriers and caisson. Life-Like eventually purchased the molds and reissued the line in the mid to late 1970s, and Encore reissued some of them in 1993.
Eduard Fokker D-VII (OAW) - (D.VII), 1/48, 8131
Multimedia Model Kit, Box Condition: Exc
Sold
Well detailed with main injection molded parts, many photoetched details (some factory color painted), mask set and painting guide and decals for multiple aircraft. The decals are extensive and even include camo patterns for the wings. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
DML Maus German Super Heavy Tank, 1/35, 6007
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. Well detailed with 286 pieces, rotating turret, optional position driver and escape hatches, individual track links, elevating main gun and more.
Aurora North American F-100 Super Sabre, 1/103, 490-50
Plastic Model Kit, Box Condition: Exc+
Sold
Dated 1961 with the great Jim Cox artwork that makes these early Aurora kits so collectible & popular. This issue has a slightly larger box than earlier ones. This is a very good kit for that time, molded in a beautiful gloss silver & clear, with full landing gear and the clear 'Triangle World Map' stand. Never started. Inventoried complete with all parts, decals and instructions present. Please note, this is not a reissue of the Comet model. Aurora cut these molds years before acquiring Comet's F-100.
Lindberg F8U Crusader Crusader Motorized - With Jet Sound - (F-8U / F-8A), 1/48, 2507M
Plastic Model Kit, Box Condition: VG
Sold
1978 reissue of the very popular late 1950s kit. Ideal 'Classic Builder' is loaded with working features such as realistic motorized jet sound, retracting main and nose gear with working gear doors, removable tail section with detailed jet engine, working elevators, rudders and ailerons and working ejection seat. The kit has never been started. The motor is still in the factory sealed bag. The other parts have been inventoried 100% complete including decals and instructions. NOTE: the ejection seat is a different color plastic. It is from an earlier issue of this same kit. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.