Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Trumpeter Iraqi Army type 69-II Tank / Type 59 Chinese Medium Tank / Israel Ti-67 105mm Gun Tank, 1/35, 00321

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

SALE!! Includes all three factory-sealed 1/35 scale armor kits.

Bandai Panzerkampfwagen V Panther G - (Panzer V), 1/48, 8228-350

Plastic Model Kit,   Box Condition: Good

Sold   

Rare 1/48 scale model that is part of the classic and highly detailed Bandai Pin Point 1/48 armor series. These kits are beautifully molded and feature interior detail as well as flexible treads, many operating features and crew members that can be assembled in almost any position. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The decals are flat and intact but NOTE: they have some stains. If you building this model, be prepared to furnish your own decals.

Hasegawa AU-1 Corsair, 1/48, 09395

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed and hard-to-find. Dated 2001 and a completely new kit; it is not the older Hasegawa 1/48 Corsair. Features 133 pieces, all fine recessed panel lines, very good cockpit and engine detail, optional position canopy, enclosed & detailed gear wells, 6 piece split flaps that can be displayed up or down, 12 underwing hardpoints, drop tank, bomb and rocket loadout and more. With decals and paint guide.

Eduard Albatros D-III OEFFAG 253 - Flik 56J Othmar Wolfan, 1/48, 84152

Multimedia Model Kit,   Box Condition: Exc

Sold   

Well molded and detailed. Features complete engine, excellent cockpit and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Rickenbacker's Spad XIII - With Pilot and Two Crew Figures, 1/28, H235

Plastic Model Kit,   Box Condition: VG

Sold   

Very large 1/28 scale model from 1975; it is a reissue from the famous and well detailed 1957 'S' molds. Features 'Hat-In-The-Ring' 94th Aero Squadron markings for Captain Eddie Rickenbacker's aircraft, detailed Hispano-Suiza engine, removable inspection panels, detailed machine guns, full cockpit, rotating wheels and prop, very fine 'fabric' detailing over ribs and stringers and full rigging instructions. Never started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: one small part (#20 support strut for the horizontal stabilizer) is a different shade of green plastic. It is from an earlier issue of this same kit.

Revell Flying Tigers DC-8-61F/63F - (DC-8 61), 1/144, 2156

Plastic Model Kit,   Box Condition: Good

Sold   

Lodela stretch DC-8 issue with a colorful and large sheet of Flying Tiger Line decals. Decals are in remarkable 'near mint' condition. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Sweet Mitsubishi A6M2b Model 32 Zero Fighter - Two Kits, 1/144, 7

Plastic Model Kit,   Box Condition: NM

Sold   

Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale and always include an incredible decal sheet for multiple aircraft. This model features two Zero kits with very fine recessed panel lines, detailed engine front, centerline drop tank and more. There is a large and extensive decal sheet for 11 different aircraft and a full color painting guide for all of them. Never started and inventoried 100% complete. Includes decals and instructions.

Platz TWO Focke-Wulf FW-190 D-9 Yellow Tail - (FW190D9), 1/144, PD-6

Plastic Model Kit,   Box Condition: NM

Sold   

Includes two complete models and certainly ranks among the finest 1/144 scale models ever made. Features all new tooling, excellent detail, super-fine recessed panel lines, very good cockpit and gear wells, complete landing gear and more. Includes a large decal sheet with a wide variety of markings and even stencils. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Revell Junkers Ju-52 /3mW or Ju-52 /3M - (Ju523nW), 1/72, H2017

Plastic Model Kit,   Box Condition: Good

Sold   

Very well molded with fine corrugated external surfaces. Features optional parts for land or seaplane, complete cockpit, choice of transport or parachute transport cabin interior configurations, detailed engines, optional position cabin door and optional defensive machine guns and decals for Crete 1941 and Med seaplane 1942/43. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Entex 1928 Lincoln L Dietrich Convertible Sedan, 1/16, 2205

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. From high quality ex-Bandai molds. This large 1/16 scale kit is very highly detailed with 227 pieces and can be built as an open car (with a top boot) or closed car with a full roof. Features completely detailed engine and engine compartment, removable hood, full rolling chassis with driveline, suspension and exhaust detail, steerable wheels, real rubber whitewall tires, complete interior and much more.

AMT 37 Chevy Coupe - Stock or Street Rod - (1937 Chevrolet Coupe), 1/25, A137-225

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Older issue from the late 1960s/early 70s- not a reissue. Very well detailed kit can be built one of two ways - stock or racing. Includes extensive customizing and racing parts. Features detailed Stovebolt 6 engine with stock carbs or dual carbs with chrome air cleaners, stock or chrome valve cover, blown 427 engine, detailed engine compartment with removable hood and custom clear plastic hood, very good chassis detail with separately molded front springs with shocks, front axle, brake backing plates, steering arm, tie rods, racing link, drive shaft, rear axle and springs and exhaust, choice of stock or racing wheels, Cragar racing wheels with trim rings, complete stock interior or custom interior with buckets, roll bar, shoulder harness and custom wheels, shifter and dash, optional position stock convertible top, numerous custom body parts and a very large sheet of decals. Molded in colored plastic, clear, red-tint clear, chrome and with rubber tires.

Hasegawa Kawasaki Ki-48-I Type 99 Light Bomber Lily With I-1 Missile, 1/72, NP1X

Plastic Model Kit,   Box Condition: VG++

Sold   

Dated 1995. This limited issue features 85 pieces, detailed interior and the I-1 Missile. Includes markings for two aircraft; 3rd Chutai 8th Hiko Sentai and 2nd Chutai 75th Hiko Sentai. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Revell U.S.C.G. Cutter Eagle - With Sails, 1/254, 5411

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. This model is from the same molds as the 1950s 'S' kit, which has excellent detail for that time. Features full hull, complete deck fittings with ladders, winches, deck houses, ships wheel, vents, bollards, capstans and more, two motor launch, two whale boats and rafts, molded ratlines, 19 preformed vacuform sails and more. The 295' bark rigged sailing ship was built in 1936 in Bremerhaven, Germany, for the German Navy. It was originally named Horst Vessel. The vessel was acquired in 1946 as a World War II war reparation. The ship was named the U.S. Coast Guard Cutter Eagle, and has been used ever since as a training ship for future U.S. Coast Guard Officers. Eagle is based in New London, Connecticut.

Airfix Sopwith 2F1 Camel - (Sopwith Camel), 1/72, 00075

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Nicely molded, older kit with markings for the famous pilot who destroyed the airship L53 on August 10, 1918. Culley received the DSO for his feat.

Strombecker Hercules Tank Car And R-23 Illinois Central Refrigerator Car, 1/87, R-32

Wood Model Kit,   Box Condition: VG to Fair

Sold   

SALE!! Includes both kits in their original boxes as shown. Both are highly prefabricated models with all quality western pine hardwood parts cut and finished to final shape, truck, good details and full-color decorations for the tank car and box car sides and ends. They are never started. Some parts are still in the factory sealed envelopes; all other parts that are not sealed have been inventoried complete. With all paperwork included. Strombecker was famous for it's pre-cut and shaped wooden aircraft, ship and train kits. While other manufacturers issued simple blocks of wood with plans, Strombecker took the chance of increased price and finished the wooden parts to shape or very close to it.

Minicraft Beechcraft Bonanza F33, 1/48, 11670

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Features all new tooling for the tail section & three blade propeller, fine all recessed panel lines, full interior, removable cowl, detailed engine and more. Includes decals for the two aircraft shown on the box top artwork.

Campbells Custom Kits Wally Simmers Dyna-Moe - 34 Inch Wingspan Flying Cabin Class C for Free Flight or R/C Conversion - (Dynamoe By Midwest), 402

Wood Model Kit,   Box Condition: Exc

Sold   

From the mid 1960s and another successful Wally Simmers design for Class C Cabin National Competition. This large and graceful climbs at 1000 feet per minute and glides at 10 to 1. Features high quality die-cut parts, stripwood & spars, finished trailing edges, finished wheel, big factory-cut prop blades, covering tissue in white and bright red and beautiful full-size plans. Never started. Most parts are still factory sealed; the ones that were never sealed have been inventoried complete.

Midwest Wally Simmers Gollywock - 32 inch Wingspan Class C Aircraft, 403

Wood Model Kit,   Box Condition: Good

Sold   

From the mid 1960s and another successful design for Class C Stick National Competition by Wally Simmers. Climbs at 1200 feet/min on rubber power with a glide angle of 10 to 1. Large and graceful. Features covering tissue, high quality print and stripwood, carved prop, hardwood and beautiful full size plans. Never started and inventoried complete. NOTE: although there is no assembly, some parts were 'loose' (outside the printed lines) cut from the printwood, mainly wing parts.

Comet Stinson SR-7 - 25 inch Wingspan Flying Balsa Airplane Model, 3209

Wood Model Kit,   Box Condition: Good++

Sold   

1970s reissue of the older kit. Features traditional wood/tissue construction, quality printwood sheets, factory cut stripwood and spar, formed wire propeller shaft/rubber hook, formed and finished thrust button, clear canopy material, tissue, plastic propeller and detailed full size plans with building instructions. The model has not been started. Inventoried 100% complete. The box has light age foxing (brown spots) on the other side; hence the lower 'good++' grade. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Midwest Super Jabberwock - 33 Inch Wingspan Class C Cabin Competition for Free Flight or R/C Conversion, C-1

Wood Model Kit,   Box Condition: Exc

Sold   

Cabin style 1949 record holding aircraft designed by Wally Simmers. These aircraft were common in the 1930s when the sport of free-flight model airplanes reached it's zenith. It was not uncommon for these models to fly for 45 minutes or more on rubber power alone - many flew out of sight. It soon became common practice to write your name, address and phone number on the covering tissue if you wanted to get it back! Quality kit includes printwood, strip wood, precarved prop, two colors of tissue and beautiful full size plans. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.