AMT Northrop YB-49 Flying Wing, 1/72, 8619
Plastic Model Kit, Box Condition: Sealed VG++
Sold
Still factory sealed. Well detailed and large model of Jack Northrop's ideal clean bomber design.
Hobby Boss Rafale B Fighter, 1/48, 80317
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Very crisply molded kit with 157 parts. Features all fine, recessed panel lines, excellent cockpit and gear well detail, optional position canopy, separately molded rudder, ailerons and flaps, a large variety of under-wing load outs and more. There are decals for two French aircraft.
AMT Henschel Hs-129B Tank Buster - Luftwaffe SG4(II Gruppe) Russia 1944 / IV Gruppe SG9 Commander Winter 1944, 1/48, 8684
Plastic Model Kit, Box Condition: Good++
Sold
Very nicely molded kit with parts for early production and early production aircraft, Hs-129B-1/R-1 and Hs-129-3 aircraft. Features good cockpit and engine detail, BK 7.5 cannon, BK 2.5 cannon, SC50 (110lb) bombs, decals for both aircraft and more. The kit has never been started. Internal factory sealed bags including decals and instructions.
Ye Olde Huff-N-Puff 36 Foot Wooden Billboard Reefer Old Dutch Cleanser - 'S' Scale Craftsman Kit, 1/64, 559
Wood and Metal Model Kit, Box Condition: Good
Sold
Excellent, highly detailed craftsman kit in unusual 'S' scale. Features cut and prescribed hardwood car sides that are factory painted and lettered with Old Dutch graphics & text as well as 'Cudahy Refrigerator Line' and car number & data, fully milled hardwood roof and floor, pre-cut and scribed car ends and doors, wood stock as required, side door hinges, cast metal bolsters, lower car ends and brake cylinder, metal ice doors, metal brake wheel, platform, grabirons, chain, car door slides and more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including detailed, illustrated instructions.
Impressions In Brass Icarus - 11 Inch Wingspan Brass Model, 101
Plastic Model Kit, Box Condition: Good
Sold
Rare model from 1973. Features printed brass parts, brass wire and spring steel wire as required, assembly aids and more. Includes comprehensive, illustrated assembly instructions and detailed three view drawings. Required solder assembly. Never started. It has been inventoried complete with all parts and includes instructions.
Cleveland Great Lakes Trainer - EZ Flight Engineered 20 Inch Winspan Flying Aircraft - Rubber Or Gas Powered, EZ-1
Wood Model Kit, Box Condition: Good
Sold
Rare 1948 flying model by the world-famous Cleveland Model Company. This kit is the first in a series which greatly reduced building time. Called the E-Z line, it is designed for rubber powered or small gas engine free-flight & features fully die-cut airframe pieces made from fine, light-weight balsa, all other parts as required and the superb Cleveland plans with instructions. Before this, die-cut parts were expensive to produce and therefore rare; all but the most expensive of the kits required you to hand-cut every part out of the sheetwood which was not only tedious and very time consuming but always resulted in broken parts. Never started and inventoried complete with all parts and includes decals and instructions.
Sterling Hal Kriers Great Lakes Special - 24 Inch Wingspan, A24
Wood Model Kit, Box Condition: Good
Sold
Impressive scale kit for RC, free flight or control line. Features large, full color decal sheet, high-grade die cut balsa, die cut plywood, vacuform plastic cowl with engine detail plus wheel pants and pilot, clear canopy material, carved and painted wood main and tail wheels, finished wire landing gear, rubber motor and plastic propeller, carved wooden thrust button, firewall, elevator horn platform, metal hardware and pushrod wire, full size plans with instruction details and full instructions for conversion to RC or control line. The model has not been started. The small parts are still factory sealed; the parts that were never sealed have been inventoried complete and includes plans and decals. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I personally considered Sterlings to be 'deluxe' kits.
Eduard Pfalz D-IIIa - With Additional Eduard PE Set - (DIII), 1/48, 8045
Plastic Model Kit, Box Condition: VG
Sold
Includes Eduard #48-217 Pfalz D.III Brass PE Super Detail Set with extensive interior and exterior parts; never used and complete with all parts and instructions. The actual kit features excellent injection molded plastic parts, numerous photoetched details, film instruments, mask set and three sheets of decals (with lozenge markings) for three different aircraft and a painting guide. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Classic Airframes Polikarpov I-153 Chaika - USSR 8th FR Black Sea Fleet / Minsk June 1941, 1/48, 96-406
Multimedia Model Kit, Box Condition: Good
Sold
Very high quality model with all fine recessed panel lines, many photoetched details, excellent cockpit, film instruments and more. Includes decals and color paint guide for both aircraft. Never started. The parts are either inventoried complete or still in the internal factory sealed bags. Includes decals and instructions.
Hasegawa Kyushu J7W1 Shinden, 1/48, JT22
Plastic Model Kit, Box Condition: Exc
Sold
Dated 1995. Well molded with full cockpit, detailed landing gear wells, very fine raised panel lines, standing pilot figure and optional position landing gear and canopy. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The amazing Shinden was a radical design and the first canard aircraft in Japan. The basic design was first tested in the MXY6 motor glider with a 22 hp engine in 1943. The tests were considered a success, and design of the J7W1 begane in June of 1944. Various configurations were tried, and the prototype modeled here has the rear mounted 2000 hp engine, 6 blade prop, 20 degree sweep back to the wing, two vertical stabilizers and four nose mounted 30mm cannon. It flew two weeks before the end of WWII but never saw combat.
Tamiya Mitsubishi A6M5 Zero Fighter Zeke Plus Airfix Grumman F4F-4 Wildcat, 1/72, 60779
Plastic Model Kit, Box Condition: Exc
Sold
SALE!! Includes both of these kits. These are modern models and among the finest 1/72 scale kits available.SALE!! Includes two models in one box. Ideal builder kits, please read carefully for the condition. NOTE: these models have 'professional' quality subassembly as follows: Tamiya A6M5 Zero- cockpit tub; side panels to fuselage; engine. There is no other assembly. Inventoried complete with all parts, decals and instructions present. Kit #2, Airfix F4F-4 Wildcat: cockpit tub; engine built. There is no other assembly. Inventoried complete and includes decals and instructions.
Pavla Yakovlev UT-1 - Or UT-1B, 1/72, 72034
Plastic Model Kit, Box Condition: VG
Sold
SALE!! Includes both kits in the one box shown. They have never been started and both are still in the factory sealed bag. Includes decals and instructions. High quality limited run kit that features parts for UT-1 or UT-1B versions, very fine recessed panel lines, numerous high-definition cast resin details including the cockpit and engine, landing gear or skis, optional underwing rockets and more. With decals and paint guide for both types of this aircraft.
AML Heinkel He-46C - Spanish Civil War or Luftwaffe Markings, 1/72, 72-001
Plastic Model Kit, Box Condition: Good+
Sold
Limited issue kit that cleanly molded. Features very nice engine detail, good cockpit detail, optional bomb load and decals for two aircraft: Spanish Nationalist Grupo 11 from 1938 or Luftwaffe Nachtslachtgruppe 4/NSGr. 4 in the Balkans during 1943. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Anmark Cunard Queen Elizabeth 2 - Ocean Liner QE2 - (ex Revell / Otaki / Gunze Sangyo), 1/450, 7201
Plastic Model Kit, Box Condition: Sealed VG++
Sold
Still factory sealed and from quality molds. Large-scale model is well detailed with 174 pieces and measures 25.7 inches long when assembled. This issue is for static display; however, many have converted it for R/C water operation with twin with twin RE-280 or RE-260 motors (motorizing and R/C parts are not included. These molds have seen reissues by Otaki, Revell and Gunze.
MPC Space 1999 Eagle 1 Transporter, 1-1901
Plastic Model Kit, Box Condition: Good
Sold
1975 original issue and not the common reissue. This model was released as a tie-in to the popular science fiction TV show starring Martin Landau and Barbara Bain. Measures 12 inches long when assembled and includes detachable cargo hold. The kit has never been started. It has been inventoried and NOTE: missing one part, #5 - a clip that holds the cargo compartment to the Eagle. Otherwise includes all other parts, decals and instructions.
Hobby Model Vought Sikorsky Corsair F4U-1 - 28 Inch Wingspan Flying Model, 23
Wood Model Kit, Box Condition: VG
Sold
Rare 1940s stick-and-tissue rubber powered flying model kit with a 28 wingspan and retractable landing gear. Could be easily converted to electric power and RC with today's light components. Inside, the kit is exactly as it left the factory. All of the parts are specially wrapped (I am calling it 'internally sealed) in the plans and you can be the very first to open it! The box is in 'very good' condition which is exceptional for these thing, lightweight boxes. The box art by Alan Berni unfortunately shows Corsairs attacking what appears to be CV-3, USS Saratoga. Hobby Model was located in New York, NY and had a large and extensive line of wooden flying models and also solid wood display scale models.
Revell M-56 Self Propelled Gun - 'S' Kit, 1/40, H540-98
Plastic Model Kit, Box Condition: Good-
Sold
Hard =-to-find first issue hardbox 'S' kit from 1958 which features hollow gun barrel that swivels, elevates and recoils, 10 wheels/gears and flexible tracks that work, operating loading platform and crew. Molded in correct dark olive drab with correct 'S' kit decals and instructions. Never started and inventoried complete with all parts and includes decals and instructions. Please note that the box is only 'good-' with the wear and tear as shown.
Sterling Mister Mulligan - 32 Inch Wingspan Scale Model For Control Line - (Howard DGA-6), 1/6, C3
Wood Model Kit, Box Condition: Good
Sold
Late 1950s or early 1960s issue of this beautiful 1/11.6 scale kit. Sterling's authentic reproduction based on the plans and photos of the actual aircraft. The kit is very well engineered and features the finest grade and density-selected balsa wood, sanded to micrometer tolerance and precision die-cut, quality die-cut quality plywood for high stress areas, factory-cut stringers and spars, other wood stock as required, large aluminum colwing, factory-sealed hardware kit, fully leading and training wing edges, covering material, formed spring steel main landing gear struts, clear windshield and window material, a very large & authentic decal sheet and easy to read step-by-step plans & instructions. Never started. All of the small parts are still sealed in the factory clear bags. The parts that were never sealed have been inventoried complete and includes all paperwork. The Howard DGA-6 was a pioneer racing plane, nicknamed 'Mister Mulligan.' It was the only airplane ever designed for the specific purpose of winning the Bendix Trophy. The plane was designed and developed by Ben Howard and Gordon Israel, who later became an engineer for the Grumman Aircraft Engineering Corporation. Mister Mulligan was designed to fly the entire length of the race nonstop and at high altitude. Neither had ever been done before. Mister Mulligan won the trophy, and thus changed the way in which long distance airplanes were designed. Sterling, the manufacturer of this kit, was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they had the action features and included everything needed to complete the model.
Anigrand Boeing X-20 Dyna-Soar, 1/72, AA2077
Resin Model Kit, Box Condition: VG
Sold
Excellent model which is cast from high-definition resin. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram Grumman HU-16B Albatross Plus Microscale Hu-16 Decals For Four Aircraft - Heritage Edition, 1/72, 6065
Plastic Model Kit, Box Condition: Good+
Sold
Includes a rare, mint condition Microscale #184 Hu-16 Albatross Decal Sheet designed for this model. It includes a paint & marking guide and decals for four colorful aircraft: SAC USAF, Navy NAS Agana Guam, Navy MAC, USAF 354 TFW Rescue. The actual kit is the Heritage Edition from 1984 with USAF markings. Very well detailed with perfect fit & finish. Features retractable landing gear and turning props/wheels with life raft, ladder and two downed airmen. The kit has never been started. Inventoried 100% complete including decals and instructions.