Revell TWO Lockheed F-117A Stealth Fighter, 1/72, 4382
Plastic Model Kit, Box Condition: Exc
Sold
SALE!! Includes two kits. Kit #1 is never started and inventoried 100% complete. NOTE: kit #2 has minor, 'professional' quality subassembly as follows: instrument panel to floor; one seat side to seat body. There is no other assembly. Inventoried 100% complete and includes decals and instructions. 1990 Revell of Germany kit molded in the USA. Very finely made kit with full cockpit, optional position weapons bay doors, missiles and excellent detail throughout.
Hasegawa Panavia Tornado IDS - Luftwaffe JaboG 31 'Boelcke' / JaboG 31 / JaboG 33 - Baggged, 1/72, K29
Plastic Model Kit, Box Condition: Exc
Sold
Bagged kit from 1990. Very highly detailed kit from newer tooling. Widely considered the finest 1/72 scale Tornado kit produced. Features all very fine recessed panel lines, very good cockpit detail, wings that swing, detailed gear wells, two piece canopy, a large variety of under wing stores and decals for all the aircraft listed. NOTE: this kit has 'professional' quality subassembly as follows: upper intake ramps and intake boxes to upper and lower fuselage halves; two seat assembled; two man wheel wells installed in lower fuselage half; cockpit 90% assembled. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Hasegawa Tornado GR Mk.1 - RAF Dambusters No. 617 Sq No.1 Group / Royal Saudi Air Force / RAF No.9 Sq 1st Group / RAF Germany No. 16 or No. 17 Sq, 1/72, K28
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. From 1989. Very highly detailed kit from newer tooling. Widely considered the finest 1/72 scale Tornado kit produced. Features all very fine recessed panel lines, very good cockpit detail, wings that swing, detailed gear wells, two piece canopy, a large variety of under wing stores and decals for all the aircraft listed.
Monogram Mercedes 540K Cabriolet, 1/24, 2306
Plastic Model Kit, Box Condition: Good-
Sold
From 1982. Very highly detailed and well molded model features complete engine and engine compartment, removable hood, full interior, underside detail and real rubber tires as well as chrome plated parts. Never started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including instructions.
Monogram 1965 Chevrolet Corvette Stingray Coupe, 1/8, 2600
Plastic Model Kit, Box Condition: Good
Sold
NOTE: excellent builder kit ONLY. Not collectible. Please read carefully. This kit is complete but has some very neat assembly and painting done. Very large 1/8 scale model that measures 22 inches long when assembled. Nicely detailed and well molded featuring complete 327 CID Fuel Injection engine and detailed engine compartment, opening hood, exhaust, suspension and chassis detail, steerable front wheels, complete interior, headlights that open and close and more. Molded in beautiful bright gloss red, black, clear and chrome and with real rubber tires. Inventoried 100% complete with all parts, decals and instructions present. The kit has had the following very neat sub-assemblies built. The quality of the build and paint is in parenthesis with the build quality first. The format is (build quality/paint quality): Engine built and put into frame (professional/near mint), battery and overflow tank (pro/near mint), air intake assembly and radiator assembly (pro/near mint), some front suspension parts and steering box (pro/near mint), master cylinder built and painted but not installed (near mint/excellent+). There is no other assembly. There is other painting as described: minor interior trim (pro to 'very good'- which is only because it needs a second coat. There is just one thin coat), WSWiper blades (pro), front and rear windshield reveal molding and vent window frames, all on the body (pro to excellent++), black weatherstrip around those (excellent to only 'good'). I did not see any other paint but there could be other minor parts painted.
AMT 1959 Chevrolet Corvette - Stock or Custom, 1/25, T393
Plastic Model Kit, Box Condition: Good
Sold
1970s T issue that can built one of two ways. Features detailed engine compartment and opening hood, full interior, detailed molded chassis, numerous custom parts and more. NOTE: this kit has minor and neat assembly. The four axle blocks are glued to the chassis to 'near mint' quality. There is no other assembly and zero painting. It has been inventoried complete with all parts and includes decals and instructions.
Testors Dodge Viper GTS, 1/24, 181
Metal Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. From 1998. Very nice kit that is completely factory painted - simply build and enjoy. Features mainly metal parts with some details are injection molded plastic.
Life-Like 1932 Lincoln KB Sport Convertible - (ex-Pyro), 1/32, 09342
Plastic Model Kit, Box Condition: Good-
Sold
1970s Life-Like issue from the original 1965 Pyro molds. In the early to mid 1960s the Pyro company chose many of their kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. Features detailed chassis with suspension, gas tank and steering linkage, complete motor and interior, spoked wheels, optional convertible top and removable hood. Molded in purple, chrome plate, clear and with rubber tires. The kit has never been started. Inventoried 100% complete including instructions. NOTE: instructions are photocopies.
AMT 1953 Chevrolet Corvette Roadster, 1/25, T310
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. Very cleanly molded and detailed. Features complete Blue Flame 6 engine with three side mount carbs, Powerglide transmission, full interior, rolling chassis construction like the real car, complete underside details, opening hood, removable top, and custom features: special grille and road lamps, headlight fillers, Kelsey 20 Spoke Wheels, wide low profile tires, custom valve cover and steering wheel. Molded in white, chrome and clear with real rubber tires.
AMT 1993 LT-1 Chevrolet Corvette Convertible, 1/25, 8607
Plastic Model Kit, Box Condition: Exc+
Sold
Nice kit with detailed chassis and engine, opening hood, full interior and more. Molded in colored plastic, clear, chrome plate and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Cox Babe Bee .049 Gas Engine - With Integral Tank Carburetor, 350
Metal Model Kit, Box Condition: Good
Sold
This engine has been run once or twice. It is in 'excellent' condition cosmetically, but I do believe it has been run and is sold as such. This is the 'snap start' issue and it includes all paperwork but NOTE: is missing the two wrenches.
Air Lines Martin Baltimore Bomber - RAF - (ex-Frog), 1/72, 9800
Plastic Model Kit, Box Condition: Exc
Sold
From about 1965. Very finely molded and contains no rivets - just fine panel lines. Features rotating turret, crew of three and some interior detail and optional position landing gear. Never started. It has been inventoried complete with all parts and includes decals and instructions. Box art is by the famous Jo Kotula who did 1930s covers for the magazine 'Model Airplane News' and later the Aurora box art of the late 1950s. Air Lines kits are all Frog molds that the Lines Brothers imported to the USA between 1964-1966. The kits, decals and instructions were made in England, then imported to the USA where Testors created the boxes with the colorful trading cards on the back. There are one or two trading cards on each box which show the boxart but not the advertising/logo. Some kits contain a Testors color painting guide also, but it is not specific to any model.
Ocio Creativo Dennis Bus Type B - (OcCre), 1/24, 57000
Wood and Metal Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. Beautiful, true scale kit made from laster cut hardwood parts, cast metal, completely finished wooden details and much more. Measures 29 cm long (11.4 inches) when assembled. Other kits in this superb series include ships, small boats, two wagons, two historical early steam locomotives and at least seven different trolly / street cars.
Matchbox 1928 Rolls Royce Phantom Mk.I, 1/32, PK-452
Plastic Model Kit, Box Condition: Good-
Sold
Dated 1983. Very nicely molded and detailed in three colors to minimize painting. Features detailed engine, removable hood or the hood can be built in optional closed or open positions, complete interior, 'good' underside and suspension detail with separately molded front and rear ends and exhaust, spoke wheels and more. Molded in burgundy, black, tan, chrome plate and clear and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Pyro 1930 Packard Boat-Tailed Roadster, 1/32, C343-79
Plastic Model Kit, Box Condition: VG
Sold
1965 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. The model includes colored, chrome plated and clear parts. Features detailed chassis with suspension, steering link and fuel tank, spoked wheels, complete motor and interior and a removable hood. Never started. Inventoried 100% complete with all parts and instructions.
Pyro 1930 Packard Sport Coupe, 1/32, C345-100
Plastic Model Kit, Box Condition: VG
Sold
1965 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. The model includes rubber tires, chrome plated, colored and clear parts. Features detailed chassis with suspension, steering linkage and gas tank, spoked wheels, detailed engine, removable hood, full interior and dual rear mount spare tires. The kit has never been started. Inventoried 100% complete including instructions.
Pyro 1931 Cadillac Town Car, 1/32, C346-125
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. 1965 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. In some cases, the specific car and owner is on the box. The model includes rubber tires, chrome plated, colored and clear parts. Features a nicely detailed molded chassis with suspension, steering linkage and fuel tank, complete motor, spoked wheels, luggage trunk, full interior, dual side mount spare tires and a removable hood or 'bonnet'.
Ocio Creativo London LLC 106 Street Car - G Scale - (OcCre), 1/24, 53008
Wood and Metal Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Beautiful, true scale and very highly detailed model with laser cut hardwood parts, cast metal and photoetched metal fittings, completely finished hardwood wood details and more. Measures 355 mm long (about 14 inches long) when assembled. Can be motorized with an optional motor kit for operation on your G scale railroad. Other kits in this superb series include at least 7 different historical trolley / street cars, dioramas for the street cars, ships, small boats, two wagons, early steam locomotives and rolling stock.
Monogram Navy Grumman F3F-3 - (F3F3), 1/32, 85-5835
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. 1998 "Revell-Monogram" re-issue of the classic "Four Star" model. The kit has several action features: When you pull the prop outward and rotate it CCW, the landing gear retracts. Pull it outward and rotate it CW, and the gear extends. Push the prop in, and it freewheels as normal. Kit features a movable control surfaces, highly detailed cockpit, full decals, sliding canopy and instructions for rigging.
Monogram M48 A2 Patton 90mm Gun Tank - With Diorama Instructions and Eight Figures - (M48A2), 1/35, 8217
Plastic Model Kit, Box Condition: Sealed Fair++
Sold
Still factory sealed but the seal has split and is missing a section on the right side panel. The box has significant wear as shown. 1972 reissue of the original Four Star model includes desirable diorama instructions and a total of 8 soldiers in various positions. Large-scale and well detailed model features flexible treads, rotating turret and cupola, elevating 90mm main gun and machine gun, three opening and closing hatches and working wheels/sprockets.