Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Junkers Ju-88 A-4 With Four Edaurd Sets / Gators Mask Letters & Numbers / Aires Wheel Set / AIMS Decals / Topdrawings Torpedo Ju-88 Plans / Two CMK Torpedo Kits / Two CMK Ju-88 Wing Racks For Torpedo Kits / LeArsenal Upgrade Kit, 1/32, 03988

Plastic Model Kit,   Box Condition: VG

Sold   

Build the ultimate A-4 or the Ultimate Ju-88 Big-Scale Torpedo Carrier!! Includes Includes Eduard 32352 Exterior Set, 32632 Seat belts, 32800 Interior Set, JX160 Mask Set, Aires 2086 Wheel Set and Mask, AIMS #32D009 Decals, huge 1/32 scale Topdrawings plans for Ju-88 Torpedo Carrier, (2) CMK #5044 German WWII Aircraft Torpedoes LTF5B and (2) CMK #5023 Ju-88 Wing Racks for LTF5B Torpedoes. All these items are never used and complete. Also includes the very extensive LeArsental Updgrade Set #KC3202. It includes interior parts, new correct wing tips, wing flaps, corrected horizontal stabilizer and rudder, new props, hubs and spinner, complete nacelles and much, much more. Never used and inventoried - NOTE: missing two small resin parts, both #16 and rear panels. The actual kit is very highly detailed new kit with 380 parts. Features recessed panel lines, super detailed cockpit, separately molded ailerons and wing flaps, optional position landing gear, decals for three aircraft and much more. The kit has never been started. Some parts are still sealed in the clear factory sealed bags. Some parts were not sealed and have been inventoried 100% complete including decals and instructions.

Airliners America DeHavilland DHC-7 Dash 7 Piedmont Airlines, 1/144

Resin Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Rare. Features polycast wings and fuselage with all injection molded details. Very large, full color decal sheet for the aircraft on the box cover.

Revell Boeing KC-135 Stratotanker With Resin JT3D-1 Conversion Engines, 1/139, H275-100

Plastic Model Kit,   Box Condition: Good+

Sold   

Includes four resin JT3D-1 Turbofan engines if you wish to do a conversion. The actual kit is the 1964 hardbox release that used the same art as the original 1950s 'S' issue. Inside, the kit has never been started. All parts have been inventoried complete. With decals and instructions.

Revell H-16 Piasecki Transporter - Air Power Issue, 1/96, H138

Plastic Model Kit,   Box Condition: Good+

Sold   

Softbox 'Air Power' series issue with framable box art. Features movable rotors, opening rear loading ramp, pilot, co-pilot, optional position passenger door and cockpit detail. The kit has never been started. The parts and paperwork are still in the internal factory sealed bag.

Revell Cobra II P-39 - Thompson Trophy Racing Aircraft, 1/45, H144-98

Plastic Model Kit,   Box Condition: VG+

Sold   

First issue dated in 1962 with a hardbox and molded in yellow and clear plastic. Rare model of the 4 bladed prop 1946 Thompson Trophy Winner with a 'souped up' P-63 King Cobra Allison engine. The kit has never been started. Inventoried 100% complete including decals and instructions.

Special Hobby Heinkel He-1078A, 1/72, 72007

Plastic Model Kit,   Box Condition: Exc

Sold   

One of three Heinkel designs for the OKL Emergency Fighter Competition from 1944. This design featured two 30mm cannon, 40 degree wing sweep and one HeS 011 turbojet located under the cockpit with rear exhaust. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Huma Model Junkers Ju-287 V1 Jet Bomber, 1/72, 5001

Plastic Model Kit,   Box Condition: Sealed Good-

Sold   

Still factory tape sealed. Very rare kit. The only injection molded Ju-287 ever made and now out of production.

Renwal General Patton II Medium Tank, 1/32, M556-198

Plastic Model Kit,   Box Condition: Good

Sold   

Fromn the 1950s. First issue of this action kit that has excellent detail. Features working suspension, working flexible tracks, rotating turret, elevating gun, lock clamp for traveling position, detailed engine with removable hatch and crew members that take cover then pop up from hatches. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

AMT 1939 or 1940 Ford Deluxe Tudor Sedan 3 in 1 Trophy Series, 1/25, 240

Plastic Model Kit,   Box Condition: Good++

Sold   

Rare first issue hardbox model that can be built one of three ways with the numerous custom and optional parts included. Features full engine and compartment, opening hood, complete interior and detailed underside. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: there is damage to one decal. There are tire burns on the back of the engine block halves (the glue surface, luckily) and a slight burn on one fender.

Comet Republic F-84F Thunderstreak - Flip Top Box Issue, 1/82, PL6

Plastic Model Kit,   Box Condition: VG

Sold   

Very early Comet issue in the three-color one piece 'flip top' box. The F-84 features recessed detail, in-flight configuration, stand and full decals. Never started. Inventoried 100% complete with all parts, decals and instructions. In the 1950s Comet made a beautiful line of small scale aircraft and missile models with colorful boxes. When Comet went out of business, these molds saw production for years with Aurora.

Comet Douglas F4D Skyray, 1/88, PL-5

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare kit from the early 1950s. This is the second issue with the more desirable red, yellow and black color box. Inside, the kit is as new, with the parts molded in glossy white and clear plastic, the correct clear Comet 'teardrop' stand, flat decals, as new instructions and the famous Comet catalog ordering envelope. The kit has never been started. Inventoried 100% complete including decals and instructions. Comet originally began model production in 1929 with a line of balsa flying models. In the mid-1950s Comet made a beautiful line of small and medium scale aircraft and missile models with colorful boxes. The early issues were in one-piece 'flip-top' boxes, and the later issues and releases were in standard two-piece 'hardboxes' with a lithograph slick glued to the top box. In 1963 Comet sold the plastic kit molds to Aurora, who reissued some but not all of the kits.

Comet Douglas Skyknight F3D, 1/99, PL4

Plastic Model Kit,   Box Condition: VG++

Sold   

Early 1950s issue. The box is in very nice condition with like new colors. This is likely the second issue of this kit, given the more colorful artwork. The kit is molded in glossy deep blue and clear plastic with Marine decals. Has classic clear teardrop stand and arm. Never started. Inventoried 100% complete with all parts, decals and instructions. Comet originally began model production in 1929 with a line of balsa flying models. In the mid-1950s Comet made a beautiful line of small and medium scale aircraft and missile models with colorful boxes. The early issues were in one-piece 'flip-top' boxes, and the later issues and releases were in standard two-piece 'hardboxes' with a lithograph slick glued to the top box. In 1963 Comet sold the plastic kit molds to Aurora, who reissued some but not all of the kits.

Revell Boeing 2707 SST Supersonic Clipper - Pan Am 2 Kits, 1/200, H263-300

Plastic Model Kit,   Box Condition: VG++

Sold   

Rare. 2006 reissue of the 1968 kit using the original molds. Contains two large 18 inch long SSTs, one in landing and one in cruise configuration. With a large, excellent complete Pan Am decal sheet for both and a display stand. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The Boeing SST was modeled here is the second (2707-200) variant which still had the swing-wing design which proved impractical in this aircraft. The damaging effects of sonic booms over population centers ultimately contributed to the cancellation of the project.

Dumas Chris-Craft 35 Foot Sport Fisherman With Fittings - 35 Inches Long For Display or R/C - (Chris Craft), 1/12, N20

Wood and Metal Model Kit,   Box Condition: VG+

Sold   

Excellent, very large-scale model. Features all die-cut wooden parts in mahogany, balsa and plywood, plank-on-frame construction, all stripwood, decking, brass shafting and housing, complete metal fittings, clear for windows, gold-leaf decals, American flag for the stern, very good text instructions and superb full size plans taken from the actual factory drawings. Complete and never started.

AMT Kenworth Aerodyne Conventional Semi Truck Tractor - Bagged, 1/32, 5026

Plastic Model Kit,   Box Condition: VG+

Sold   

From about 1980. Features detailed frame and suspension, full interior and more. The kit has never been started. NOTE: only one tire is present. Missing all other tires. Otherwise inventoried with all other parts present including decals and instructions.

Lindberg 1940 Ford Coupe - Street Custom / Stock / Police Car, 1/25, 72159

Plastic Model Kit,   Box Condition: Exc

Sold   

Very well done kit with detailed chassis, engine, opening hood, full interior, optional parts and decals so you can build one of three different cars and more. Molded in white, clear, chrome plate and with rubber tires. The kit has never been started. It has been inventoried complete with all parts, decals and instructions.

AMT 1941 Plymouth Model P-12 - Four Passenger Coupe -, 1/25, 6583

Plastic Model Kit,   Box Condition: Good++

Sold   

Features parts for stock or custom version, opening hood, detailed engine and compartment, full interior and underside detailing. Molded in tan, chrome, clear and rubber tires. The kit has never been started. NOTE: missing decals. Otherwise complete with all parts and instructions.

Revell Old Ironsides USS Constitution - with Billowing Sails, 1/192, 5404

Plastic Model Kit,   Box Condition: VG+

Sold   

1979 issue of one of Revell's best selling ship kits of all time. The model builds to just over 15.75 inches long and has excellent detail for the scale. Includes preformed ratlines, full deck fittings, billowing vacuform sails, rigging material and instructions for standing and running rigging and more. The kit has never been started. Internal factory sealed bags including decals and instructions.

Hasegawa Vought F4U-4 Corsair - US Navy VF-193 Ghostriders or VMF 323 (USMC) Deathrattlers (F4U4), 1/48, J9

Plastic Model Kit,   Box Condition: Exc+

Sold   

High quality kit dated 1989. Features beautiful full color painting guide, large and extensive decal sheet for the two aircraft listed, very fine raised panel lines and recessed control surface lines, detailed cockpit and gear wells and inside gear doors, pilot figure and optional position canopy. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Frog Martin Marauder II (B-26C) - Orange Series, 1/72, 338P

Plastic Model Kit,   Box Condition: Exc

Sold   

Earlier issue with the 'P' kit number. High quality Frog kit - no rivets, just fine panel lines for a realistic model. Features separately molded rudder, elevator and ailerons, pilot and gunner figure and detailed engines with rotating propellers. Inventoried 100% complete with all parts decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Blue, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.