Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa F-14A Tomcat Tophatters - US Navy VF-14 July 2001 Or VF-14 Bicentennial 1976, 1/72, 00287

Plastic Model Kit,   Box Condition: Exc

Sold   

Some of the most colorful and well-decorated US aircraft of all times were the Bicentennial paint schemes from 1976. This is a special edition from 2002 that is very highly detailed with 191 pieces. Features all very fine recessed panel lines, detailed ejection seats, full cockpits, optional boarding ladder and optional position speed brake, optional position swing wings and leading edge slats and trailing edge flaps, optional position canopy, detailed gear wells, drop tanks, weapons pylons and more.

Fujimi TWO Bell UH-1N Iroquois - USAF, 1/72, 7A25

Plastic Model Kit,   Box Condition: Good+

Sold   

SALE!! Includes two models in one box. Ideal builder kits, please read carefully for the condition. NOTE: these models have 'professional' quality subassembly as follows: Kit #1, one bulkhead and one seat glued to the floor. No other assembly. Kit #2 interior brace glued to one fuselage half; small blocking plates glued to each fuselage half (one each); cockpit built; rotor head assembled. Both kits are inventoried complete and include decals and instructions. These are nicely molded kits with recessed panel lines, full cockpit and cabin, detailed rotor head, optional position double cabin doors and rotating main and tail rotors.

Monogram Northrop F-5E Tiger II - Plus Model Technologies Canopy Detail Set, 1/48, 5407

Plastic Model Kit,   Box Condition: Good

Sold   

Includes a factory-sealed Model Technologies MT0057 F-5E Canopy Detail Set in photoetched metal; it is designed for this kit. The actual model is from 1978 and with Aggressor markings. Features full cockpit, wheel well detail, auxiliary fuel tanks, 20mm gun pods, pilot boarding ladder and markings for the kit shown on the box. Never started. It has been inventoried complete with all parts and includes decals and instructions. Please note that the box displays better than 'good' but is graded as such because there is masking tape on the right short side.

Czech Master Curtiss R3C-2 Racer - (R3C2 Floats) - Bagged, 1/72

Resin Model Kit,   Box Condition: Good

Sold   

This is a beautiful 1/72 scale model of this sleek 1925 Schneider Trophy Winner. Never started. It has been inventoried complete with all parts. Please note that this kit did not come with instructions but is an easy built; it has about 25 pieces.

Hasegawa Falcon 10 Executive Jet, 1/48, 1159

Plastic Model Kit,   Box Condition: VG

Sold   

Larger scale (1/48) kit from the early 1980s. Features complete cockpit & interior and optional position passenger doors. Incluces full decals including stripes. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Carl Goldberg Models Jr Skylark - 37 Inch Wingspan R/C Airplane 1 or 2 .049 Engines, G22

Wood Model Kit,   Box Condition: VG

Sold   

Unique design for R/C that can use one or two engines. This kit came from a very particular collector. Inside, it has never been started and everything is just as it was packed at the factory. The small parts are still factory sealed and it includes all paperwork. Carl Goldberg was a gifted designer of model aircraft, and his career spanned the evolution of flying models. His designs and number of titles won in competition at the Nationals is legendary. His first competition was the 1928 Nationals, where he received honorable mention. By 1934 he won the indoor Nats and in 1935 he opened a Hobby Shop, among the first in the nation (the first one was probably opened by Cleveland Models Ed Packard). Awards came quickly. He wrote articles for Model Airplane News, and was Comet's top designer from 1939 till 1945. After Comet, he worked with Mike Schlesinger and Sid Axelrod on what eventually became Top-Flite Models. In 1955 he founded Carl Goldberg Models and released a still-popular line of scale, rubber, gas, glider and RC models. Needless to say, Goldberg's models are of the highest quality.

Lindberg The Exterminator Dragster, 1/8, 73048

Plastic Model Kit,   Box Condition: Good-

Sold   

This large 1/8 scale model is highly detailed and 2 feet long when assembled. Can be built one of several ways; twin engine, single engine with 3x2 carb set up, single engine with 6 carb set up or single engine with front mounted blower ways. Features working steering, hand brake with hydraulic system, front axle and spring assembly, fuel system, front spoke and wire wheels, drag slick and more. Never started. All of the colored plastic parts are still in the factory sealed bags. The chrome and clear parts have been inventoried and NOTE: missing (1) part, half of an optional carb (only used on the single engine 6 carb version - can still be used to build the other three variations). Missing the electric motor and metal hardware. Otherwise complete with all parts, decals and instructions. NOTE: decals are only 'good.'

Skunkmodels F-16XL Experimental Fighter, 1/48, 48026

Plastic Model Kit,   Box Condition: NM

Sold   

Highly detailed model with an extensive choice of weapons load-outs. Never started. Two small parts trees were never factory sealed sealed and have been inventoried complete. All other parts are still in the internal factory sealed bags and includes decals and instructions.

Revell North American B-25 Mitchell - Pre-S Issue, 1/64, H216-98

Plastic Model Kit,   Box Condition: VG++

Sold   

Original first issue 'Pre-S' kit from 1954 and before the 'S' Cement logo was used. The box has classic 'Flying Dragon' Richard Kishady artwork. Features rotating turrets and propellers, pilot, copilot and bomber figures and "The Flying Dragon" decals. Correctly molded in gloss olive drab and clear and includes the famous Revell Swivel 'Globe' base. Never started and 100% complete with all parts, decals and instructions present.

Otaki Mitsubishi Zero A6M3 Type 22 - Motorized Propeller Rotates and Aircraft Taxis, 1/35, 15

Plastic Model Kit,   Box Condition: VG

Sold   

Very rare and early large-scale issue 'action' model with a high gloss box top and highly collectible artwork. This model is engineered for motorized operation of the propeller and tail wheel so it will taxi realistically. Features all metal gear box, other gear drives and linkage, all required hardware, working rudder, elevator, ailerons and wing flaps, pilot figure and opening canopy, folding wing tips and the landing gear retracts when you move the drop tank (which also cleverly houses the battery). Please note that Otaki did not furnish the electric motor with the model; it had to be purchased separately. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

ESCI S-3A Viking Sub Hunter - VS-29 USS Ranger, 1/48, 4051

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed. Well detailed kit with large decal sheet. Includes movable MAD boom, refueling probe and tailhook, optional position FLIR dome, open/closed weapons bay and entry hatch, detailed cockpit and 4 Mk. 46 torpedoes and 2 Harpoon missiles.

Revell Lincoln Futura Show Car, 1/25, 1270

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed. 1995 reissue of the famous 'S' kit and an ideal builder. Features dramatic show-car styling, full interior and dash, driver and passenger figures, clear 'bubble' canopy, rotating wheels, chrome front and rear bumper, emblem and side trim and more. Molded in mint green (like the box art) and clear plastic. Ford created the Lincoln Futura as a concept car to promote Lincoln. The designers were Ford lead stylists John Jajjar and Bill Schmidt. Unlike many concept cars, this one was fully operational. The basis of the chassis was the Continental Mark II and she was powered by a 368 cubic inch Lincoln engine and powertrain. The car was hand built by Ghia iin Italy and originally cost $250,000, or about $2.3 million in modern USD. The car was a big success for Ford and brought significant recognition in toys, movies and the show circuit. It was first displayed in 1955. When Ford was done, they sold the car to George Barris for $1. Because it was never titled and could not insured, Barris parked it behind the shop. However, in 1966 Barris was asked to make a car for the Batman TV series. Dean Jefferies was originally contracted with, but he could not make the car in time. Barris thought the Futura would make a fine basis for the Batmobile, and so it did. Barris always retained ownership of the car, leasing it to the studio for filming. In 2013 he sold the car to a collector for 4.62 Million US Dollars.

Comet Republic P-47 Thunderbolt, 1/53, PL501-69

Plastic Model Kit,   Box Condition: Good++

Sold   

Rare kit from the mid to late 1950s. Comet made two plastic P-47 models and this is the larger of the two. Comet was an early wooden flying and scale model kit manufacturer that branched out into plastic kits in the 1950s with a large line of small and mid-scale civil and military kits. The plastic line was sold to Aurora around 1960. Aurora had no P-47 in it's lineup, so when it purchased the Comet molds, Aurora reissued this this 1/48 P-47 and the smaller one. NOTE: this kit has minor and 'professional' quality assembly to three parts as follows propeller, propeller retainer assembled to the engine nacelle. It has been inventoried complete with There is no other assembly. Inventoried with all parts present and includes decals and instructions.

Sweet A6M2b Zero Fighter Akagi Fighter Group - Three Kits, 1/144, 23

Plastic Model Kit,   Box Condition: VG

Sold   

Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale and always include an incredible decal sheet for multiple aircraft. This model features three Zero kits and markings for 7 of Akagi's Fighter Group aircraft from Pearl Harbor on December 7. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Sterling Mk.II Puddle Jumper - 30 Inch Long Air Boat For R/C Operation - Sport or Coast Guard Version, B27

Wood Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed and in mint condition. Rare, large-scale 30" version, not the smaller 18" one. A great performer when powered by a .15 to .35 engine or a modern electric motor. Features a precision vacuum formed plastic hull and cabin, accurately die-cut balsa and plywood parts, hardware package including R/C hardware, full size plans, decals for sport version or coast guard, instructions and more.

Revell Air Racers! Clay Lacy's P-51D Mustang & P-39 Airacobra Racer - Diorama, 1/72, H664

Plastic Model Kit,   Box Condition: Exc

Sold   

1976 issue that includes both kits and the full diorama shown. The P-39 model has been modified for the race version and is not Revell's standard 1/72 Airacobra. The models are molded in the bright colors shown on the box top. Never started. It has been inventoried complete with all parts and includes decals and instructions. Revell issued three of these kits in this year H664, H665 and H666. Each contained two aircraft and a color diorama base, backdrop and special stand. If you have all three kits, the three bases fit together to make a large Air Show diorama with all six aircraft.

MPC P-51D Mustang - This Is It - With Two Large Color Koku Fan Posters, 1/24, 2-3502

Plastic Model Kit,   Box Condition: Good-

Sold   

Includes two full-color Koku Fan posters that are folded to fit into the box. Very large (1/24) scale kit is very highly detailed and from quality Airfix molds. Features removable body panels showing complete Packard-Merlin engine and firewall, sliding canopy and full cockpit, retractable landing gear, moving control surfaces and more. Never started. Inventoried 100% complete with all parts, decals and instructions. The decals are for the box art aircraft.

Monogram F-101B Voodoo - Canadian or USAF, 1/48, 5811

Plastic Model Kit,   Box Condition: Good-

Sold   

1985 issue with colorful Canadian and 'Texan - William Tell Champions' decals. Very finely molded and detailed kit with traditional high Monogram quality. Features full cockpit detail, optional position canopy, detailed wheel wells, Falcon and Genie (Nuclear) Missiles and optional position speed brakes. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram F4U-5N Corsair Pro Modeler - (F4U5), 1/48, 85-5980

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed. Dated 2003 and a completely new kit - not a reissue of the old Four Star Corsair. Beautifully molded with finely engraved panel lines. Features detailed cockpit and engine, opened or closed canopy, excellent landing gear, gear well detail, rocket, bomb & drop tank loadout, optional wing radome, optional position split wing flaps (all 6) and more. Includes a large decal sheet for -5NL of VC-4 or -5 from NAS Glenview, Illinois Reserve Squadron.

Strombecker Douglas DC-3 Flagship - American Airlines, C-35

Wood and Plastic Model Kit,   Box Condition: Good-

Sold   

Before plastic kits were introduced, Strombecker was famous as the premier manufacturer of very highly prefabricated hardwood models. From the 1930s to the 1950s Strombecker kits were flawlessly engineered but not inexpensive. All wooden parts are quality hardwood (not balsa) and are precarved to final shape; usually a quick sanding would finish them. When completed this DC-3 makes an impressive desk top display with a 10.5 inch wingspan. This example even includes the original glue and wood filler envelopes. Never started. Inventoried complete with all parts, decals and detailed plans & instructions. Decals are in amazing "Near Mint" condition.