Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Monogram Fabrege Super Brut Funny Car - Al Sergrini's Dodge Omni, 1/32, 1044

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Very rare and still factory sealed. 1982 issue and a very nicely detailed model. Features detailed chassis and engine, tilt up body, driver figure and more.

Monogram Blue Max Funny Car - Raymond Beadles Ford EXP, 1/32, 1043

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Very rare and still factory sealed. 1982 issue and a very nicely detailed model. Features detailed chassis and engine, tilt up body, driver figure and more.

Monogram Pepsi Challenger Funny Car - Don Snake Prudhommes Trans Am, 1/32, 1042

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Rare and still factory sealed. 1982 issue and a very nicely detailed model. Features detailed chassis and engine, tilt-up body, driver figure, colored, clear and plated parts and decals.

Lindberg WWII Navy Assault Airplane F6F Hellcat - Motorized, 1/48, 302M-100

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed but the seal is brittle and has multiple splits on the right side. This rare 1950s hardbox issue has fantastic Ray Gaedke artwork, an electric motor for the propeller and a base that hides the batteries underneath.

Monogram B-26 Invader - Four Star Issue / True Second Issue, 1/67, P6-98

Plastic Model Kit,   Box Condition: Good

Sold   

True second issue from 1955. Rare. Few people (including me) knew that there was a second release of P6-98 that varied significantly from the first issue. The true first issue has a part number of 'P6-98', early '4 star' rectangle logo, black rubber main gear tires and no support peg to keep it from being a 'tail sitter' when assembled. The second issue (this kit) has the same part number, logo but has regular injection molded (silver) tires and a peg to keep the nose gear grounded. The instructions show these changes and confirm that this model is still numbered kit P6 (as do the decals also). Molded in correct gloss silver and clear plastic. Never started. It has been inventoried complete with all parts and includes decals and instructions. (In the past it was believed that the second issue was 'PA6-98' with a modified box top logo. This is now known to be the third issue.)

Eduard P-400 Airacobra, 1/48, 8061

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Highly detailed kit with 113 pieces, recessed panel lines, excellent cockpit, mask set and markings for the box art aircraft.

Tamiya Arado Ar-196 A - Germany 2/Sagr 125 Crete 1941 / Battleship Bismarck 1/BordfliegerGr. 196 1940 / Auxillary Cruiser Widder (HSK-3) October 1941 - (Ar196A), 1/48, 37006

Plastic Model Kit,   Box Condition: NM

Sold   

Hard-to-find and well detailed model from 2010. Features all fine recessed panel lines, very good cockpit, optional position canopy, separately molded ailerons, trailing edge flaps, elevators and rudder, very good engine, bomb loadout, land dolly/trolley and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Accurate Miniatures P-51C Mustang Merlin Powered- 'Princess' China 1945 Or Penny - Bagged, 1/48, 3419

Plastic Model Kit,   Box Condition: No Box

Sold   

NOTE: bagged kit, there is no box. The box is shown for reference only; the kit is still in the plain brown cardboard Accurate Miniature shipping box. Highly detailed from excellent molds. Includes decals for 'Princess' #2103896 and 'Penny' #2103903. Never started. The parts are still in the internal factory sealed bags and includes instructions.

LF Models Curtiss R2C-1 - 1923 Pulitzer Trophy Winner, 1/72, 7255

Resin Model Kit,   Box Condition: VG+

Sold   

Excellent limited edition kit. Features main airframe parts in professional grade castings, good interior detail, printed instruments, painting guide and full decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. From thisdayinaviation.com: Two R2C-1 Racers was built for the U.S. Navy by the Curtiss Aeroplane and Motor Company of Hammondsport, New York, and were assigned serial numbers A6691 and A6692. They were single-place, single-engine biplanes with a wooden monocoque fuselage and fabric-covered wings. Curtiss had made every effort to reduce aerodynamic drag, including the use of surface radiators on the wings to cool the engine. The airplane was 19 feet, 3 inches (5.867 meters) long with a wingspan of 22 feet (6.706 meters). The biplane had an empty weight of 1,692 pounds (767 kilograms) and gross weight of 2,112.3 pounds (958.1 kilograms). The R2C-1 Racers were powered by a revolutionary 1,209.610-cubic-inch-displacement (19.813 liter) water-cooled, normally-aspirated Curtiss D-12A dual overhead camshaft (DOHC) 60° V-12 engine with four valves per cylinder. The cylinders and water jackets were cast as a monoblock and a drop-forged crankshaft with seven main bearings was used. A Stromberg NA-75 carburetor supplied the air/fuel mixture. The engine turned a two-bladed forged aluminum propeller designed by Sylvanus A. Reed. This fixed-pitch propeller had very thin blades which allowed it to turn at high speed without adverse sonic effects. The D-12A drove this propeller without gear reduction (direct drive, hence the “D” in the engine’s designation). The D-12A was specifically modified as a racing engine and did not have a power rating for normal service, however, it nominally produced 507 horsepower, with a 520 horsepower maximum. It was capable of operating at 2,500 r.p.m. The Curtiss D-12 was 56¾ inches (1.441 meters) long, 28¼ inches (0.718 meters) wide and 34¾ inches (0.882 meters) high. It weighed 678.25 pounds (307.65 kilograms).

Tamiya Kubelwagen Type 82 Afrika Korps - Pkw.K1 Volkswagen Jeep, 1/35, 35238

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed.

Bobcat Yak-28P Firebar - Soviet Jet Interceptor, 1/48, 48001

Plastic Model Kit,   Box Condition: Exc

Sold   

Unusual large-scale (1/48) Yak-28 with 221 pieces. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Dragon Focke-Wulf Ta-152 H-1- (Ta152H1), 1/72, 5008

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. Dated 1992. Very high quality kit with all fine recessed panel lines. Includes photoetched details and decals for several aircraft.

Italeri Bell-Boeing V-22A Osprey - US Marines / Air Force / Navy, 1/72, 175

Plastic Model Kit,   Box Condition: Exc

Sold   

Features all recessed panel lines, complete cockpit and cabin with jump seats, opening rear cargo drive-on door, rotating engine pods, detailed landing gear wells and more. Includes markings for all three services. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Italeri US Marines M4 Sherman Tank, 1/35, 6389

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed.

Hudson Miniatures 1914 Stutz Bearcat - Old Timers, 1/16

Wood Model Kit,   Box Condition: Fair

Sold   

Well detailed, large 1/16 scale kit from 1949. Features plastic wheels, grill, steering wheel, lights and other accessories, wooden and metal main parts and some die-cut cardstock parts as well. Although all of Hudson's 1/16 kits have excellent detail, this one has even more detail than usual thanks to Hudson's engineers having access to the actual car. The instructions even warn that this kit will take more time than usual due to the "tedious detail." This kit has never been started. Many smaller wooden kits are still in the factory sealed 'krinkle' bag; the other parts are not sealed and have been inventoried complete and include plans and instructions. Hudson Miniatures created a very popular line of automobile kits in a constant 1/16 scale shortly after WWII. The kits sold very well...so well that you could argue that Gowland & Gowland borrowed Hudson's subject matter for their ground-breaking 'Highway Pioneers.' The Hudson Miniatures 'Old Timers' even spawned a line of imitators, with Fador's 'Smallster' being one of the better in quality. Sales did drop on the appearance and popularity of the much smaller (and less accurate) Gowland/Revell 'Highway Pioneers' in 1951. When the all-injection molded Gowland kits proved not to be a passing fad, Hudson quickly planned and released his own all-plastic, small-scale competition called 'Lil' Old Timers Quickie Kits.' The kits were of excellent quality, but it was too little too late. Additionally, sales of the excellent wooden kits faltered further in the next few years with the introduction of accurate, 1/24 and 1/32 all-plastic cars in the mid 1950s. This forced Hudson to discontinue the wood kits and the plastic line was sold to Revell and subsequently re-released. Today, these excellent, big 1/16 kits are often the only model available of these early automobiles. In the mid 1960s Aurora thought so highly of Hudson Miniatures that they purchased the wood kit assets and released a very small number of these in all-plastic models.

RPM Sd.Kfz 135/1 15cm sFH 13/1 (Sf) auf GW Lr.S. (f) - El Alamein 1942, 1/35, 35051

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed.

Alan Bison II, 1/35, 012

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed.

Merit USS Hornet CV8 Aircraft Carrier Doolittle Raid, 1/200, 62001

Plastic Model Kit,   Box Condition: Exc

Sold   

Very large and well molded kit featuring a one-piece hull, full length hangar deck, optional position side hangar deck doors, clear flight deck in case you want the hangar to be even more visible, a sizable air wing with all 16 Doolittle B-25s including correct nose art for all,, SBD Dauntless, TBD Devastator and F4F Wildcat aircraft, extensive PE parts (10 frets in all), color painting guide and much, much more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Azur Dewoitine D-520 C-1 With TWO Squadron Crystal Clear Canopy Sets - (D520C1), 1/32, A040

Plastic Model Kit,   Box Condition: VG

Sold   

Includes TWO #9410 brand-new Squadron 1/32 D.520 Canopy sets. My friend who built one of these told that the original canopy fit so poorly that he bought the Squadron ones instead. The actual kit is highly detailed, limited edition, large-scale kit. Includes excellent injection molded parts with fine recessed panel lines, full cockpit and resin details. Molded in gray and clear (injection molded canopy) and resin castings. The kit has never been started. The resin parts are still factory sealed; all other parts have been inventoried and NOTE: missing the original canopy but two complete Squadron canopies are present. Otherwise complete and includes decals and instructions.

Mamoli Bluenose Fishing Schooner - 10 Inch Long Wooden Ship, 1/160, MM11

Wood Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. This is a perfect model for your first wooden ship. Features pre-carved hull and all fittings.