Craft Master Chuck Wagon - Wagons of the Old West, 106-350
Wood and Metal Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. Authentic, large-scale model from high quality, die-cut California Redwood, Ponderosa Pine and other materials as required. Measures 9.1 inches long, 4.25 inches wide and 7 inches high when assembled. This excellent series contained several other kits, all done to the same (unlisted) scale - Covered Wagon, Log Wagon, Jerky Wagon, Mule Team, Horse Team, Ox Team, Jail Wagon, Yellowstone Wagon, Buckboard Wagon, Sheepherders Wagon, Ore Wagon, Conestoga Wagon, Milk Wagon, Chuck Wagon, Delivery Wagon, Dray Wagon, Stage Coach and Water Wagon. There was also a very early Red Rover Fire Engine Wagon in the same scale.
BaD Ship Models USS Garcia Class Frigate FF1040 Through FF1051 - 52 Inches Long For R/C Or Static Display, 1/96
Wood and Metal Model Kit, Box Condition: VG
Sold
Rare and very large kit that can be built as any one of the sister ships listed. True scale model can be made R/C or static display. The model is plank-on-frame construction and features plywood and balsa parts, planking strips, other wood as required, molded polyester (i.e. resin) parts for gun mounts, torpedo tubes and gun director, vacuum formed styrene parts for ladders, stairs, hanger door, radar dish and more, 5-bladed 2" brass propeller, stuffing box, drive shaft, rudder assembly, anchors, chain, numbered decal sheet, flag and more. Because of the common scale, many super detail fittings are available to make this a true museum piece (extra fittings not included.) There are even super-detailed 3D printed parts on Shapeways.com! Never been started. The small parts are still in the factory sealed bags. The parts that were never factory sealed have been inventoried complete.
Nitto Jet Ranger / Hughes 500 / Iroquois UH-1B / HueyCobra AH-1 - With Toy Glider, 480-300
Plastic Model Kit, Box Condition: Exc
Sold
Very Rare. This model includes all four injection molded helicopters with decals for the box art aircraft. Each is molded in white and clear. There is also a very cardstock flying glider with 'Nittogo' on the fuselage and "Nitto Kagaku Co, Ltd' on the wing. Never started. All four plastic kits are still sealed in the original factory bags with decals. Includes instructions. The scales from the side of the box are as follows: UH-B 1/144; Hughes 500 1/100; Hueycobra is 3.7 inches long (fuselage) and the Jet Ranger is 3.25 inches long. (Sorry I don't have the scale on the last two, but my Japanese is very rusty).
Fujimi Ford GT40 Mark II, 1/24, 12101
Plastic Model Kit, Box Condition: Exc+
Sold
This well molded and detailed kit is widely considered the finest Ford GT40 in this scale. Features photoetched details, complete interior, fully detailed chassis and suspension, opening hood and more. Includes separate seat belts, regular decal sheet (which includes all instrument panel faces) and another decal sheet for the white tire letters. The kit has never been started. Some parts are still in the factory sealed bags. The parts that are not sealed have been inventoried complete including decals and instructions.
Planet Models Focke-Wulf PTL Flitzer, 1/72, 025
Resin Model Kit, Box Condition: Exc
Sold
Hard-to-find limited edition model finely cast in high definition resin. Features all fine recessed surface detail, a clear vacuform canopy (still clear, not yellowed), 'good' cockpit detail and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hasegawa Focke-Wulf Fw-190 A-5/A-8 - JG54 Walter Nowotny / Kdr. JG26 Josef Priller / II.JG300 Ernst Schroder, 1/32, ST6
Plastic Model Kit, Box Condition: Exc
Sold
Features cockpit and detailed pilot, optional position canopy, detailed engine and gun bay with separately molded access panels, detailed gear wells, optional position flaps, drop tank and decals with paint guide for the three aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Testors TWO Martin B-57B Canberra, 1/72, 698
Plastic Model Kit, Box Condition: VG
Sold
SALE!! Includes TWO kits that are still in the factory sealed bags. Also have two sets of decals and instructions. Dated 1985 and builds Vietnam camouflage or Night Intruder versions. Features 115 pieces, optional position canopy and landing gear, rotor bomb bay detail with optional position doors and full internal bomb load, underwing pylons with weapons and more.
Matchbox Fairey H9A Seafox - Cruiser HMS Asturias 1942 or HMS Arethusa 1939 Malta, 1/72, PK-36
Plastic Model Kit, Box Condition: VG+
Sold
Still the only 1/72 scale injection molded kit of this handsome aircraft. A very nicely molded kit of the Royal Navy cruiser floatplane with markings for both aircraft listed. Includes color painting guide on the back of the box. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Woodland Scenics TWO Models Two Big Old Trees - 7 To 7.5 Inches Tall - HO Scale, 1/87, TK-26
Plastic Model Kit, Box Condition: Fair
Sold
SALE!! Includes both models in the original boxes. You get a total of four big trees. Each box contains two big trees featuring one-piece trunk and branches of soft cast metal (so you can position the branches any way you wish) and plenty of leaf material. Both models are never started and inventoried complete with all parts present and includes instructions.. The boxes have insect damage on the lithograph, hence the low box grade.
Verlinden M4A1 Sherman Early Production Type - Conversion - SuperTech Issue, 1/35, 786
Resin Model Kit, Box Condition: Exc
Sold
Rare conversion model from high definition resin and with photoetched details. The recommended base kit is the commonly-available Tamiya 1/35 M3 Lee or M5 Grant. Never started. The parts are still in the internal factory sealed bags and includes instructions.
Verlinden Iraqi T-55 Applique Armor, 1/35, 714
Resin Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. This is a detailed accessory kit cast in high definition resin. Includes the additional Iraqi armor only.
Model Shipways Harriet Lane 1857 Steam Paddle Cutter - (Cutter Lavinia), 1/128, 2010
Wood and Metal Model Kit, Box Condition: Sealed Exc
Sold
Still factory clear tape sealed. Superb, large-scale wooden ship kit measure 19.5 inches long when assembled. Features fully precarved solid hardwood hull, all basswood and metal construction, copper sheathing below the waterline, laser cut paddlewheel covers, brass and Britannia metal fittings and much more. The Harriett Lane was built in 1857 and named for President Buchanan's niece. The cutter was 180 feet long with a 30 foot beam and displacement was 670 tons. Armament consisted of 3-9 inch Dahlgrens and 1-30 lb Parrot Rifle. She was built at a time when steam was not fool-proof, so she is rigged for full sails. Harriett Lane served as the Presidential Yacht, the fired the first shot of the Civil War. She chased down blockade runners until January 1, 1863 when she was attacked by five Confederate Gun Boats and boarded. She was captured and renamed the Lavinia and was used as a blockade runner. Near the end of the war she caught fire at sea, and put into Havana Harbor. Federal forces took her again and rebuilt her in 1869 as the bark 'Elliot Ritchie'. She was abandoned at sea in 1884.
MPC 1978 Plymouth Roadrunner - Stock / T-Top Version / Street Custom, 1/25, 1-7811
Plastic Model Kit, Box Condition: Good+
Sold
Hard-to-find kit in very good condition. First issue dated 1977 includes parts to build one of the three versions shown and includes Warner Brothers Roadrunner decal. Features detailed engine and compartment, opening hood, full interior detailed underside and more. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires. The kit has never been started. All the parts that were factory sealed (the vast majority) are still in factory sealed bags. The chrome, clear and tires are the only parts that were never factory sealed and have been inventoried complete. Includes instructions and decals.
MPC Pontiac GTO Super Stocker, 1/25, 1-2750
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. This is the rare original issue from the 1970s; not the common reissue. Features detailed racing engine, racing frame, very good suspension, complete interior with roll cage, all instruments & gauges, safety fuel cell and more. NOTE: there is some sun fading on the right side as shown and the same on the right side panel.
Revell Frank Lukes Spad XIII, 1/28, H290-150
Plastic Model Kit, Box Condition: VG+
Sold
1965 hardbox issue of this large scale kit. This is a reissue of the famous 1957 'S' kit that was nicely molded and detailed for that time. Features markings for Frank Luke's personal aircraft, detailed Hispano-Suiza engine, removable inspection panels, detailed machine guns, full cockpit, rotating wheels and prop, very fine 'fabric' detailing over ribs and stringers and full rigging instructions. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Revell Fokker D-VII, 1/28, 85-4665
Plastic Model Kit, Box Condition: Good+
Sold
Hard-to-find, large scale model from 1996 is a late but welcomed addition to the Revell's 1/28 scale Spad, Sopwith Camel and DR-1 Triplane. Very well molded and detailed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Bluejacket Sea Fox C-3 Cargo Ship - 30.75 Inch Long Wood And Metal Ship Model, 1/192
Wood and Metal Model Kit, Box Condition: VG
Sold
Very rare. Museum quality craftsman model in large scale. Features hardwood, kiln-dried, factory-carved hull, hardwood factory-carved superstructure, extensive high quality cast Britannia fittings and other hardwood and metal parts as required. Includes very detailed full size plans and text instruction booklet. The kit has never been started. The fittings are all still in the factory sealed bags. The parts that were never factory sealed (hull, wood and metal stock) have been inventoried complete. Includes all paperwork. The C-3 Cargo Ships were larger and faster than the C-2; after WWII they were among the most modern vessels of our merchant fleet. The actual Sea Fox was 492 feet long. This kit represents a generic C-3; by researching the differences and some minor scratch building you could model any of the ships in this class.
Tamiya HMS King George V British Battleship, 1/350, 7310
Plastic Model Kit, Box Condition: Good
Sold
Very large 1/350 scale battleship that is superbly detailed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell U-47 With Interior - U-Boat Type VII B Submarine, 1/125, 05060
Plastic Model Kit, Box Condition: Good
Sold
2015 issue of the cut-away of the famous 'Snorting Bull' of Gunther Prien. Features 124 pieces, interior detail and crew figures. Prien and his men survived 11 sailings but were lost on the 12th. On his second sailing, Prien made history by sailing into the British Base of Scapa Flow and sinking the battleship HMS Royal Oak. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell F-102A Delta Dagger with 14 Ground Accessories - 'S' Issue, 1/48, H282-298
Plastic Model Kit, Box Condition: Exc
Sold
Dated 1958. Very rare version of the large F-102 with all the ground equipment and crew shown on the front cover. Unique kit features landing gear and flaps that retract and extend when canopy is opened and closed, removable rear fuselage section and detailed removable jet engine, movable control surfaces, opening weapons bay with Falcon missiles and more. The F-102 is molded in silver and clear while the ground equipment is molded in bright yellow. The kit has never been started. The ground equipment is still sealed in the factory bag, while the F-102 has been inventoried 100% complete with all parts. The two correct decal sheets are flat and in 'excellent++' condition. Both correct instruction sheets are also present and in 'excellent++' condition. The box is rated 'excellent' but please read carefully. It has great color and gloss, four solid corners, no repairs, no fading and no missing or torn litho. Flaws include light edge wear (see left side), very light creases and general wear and thin clear tape/tape marks on the two longer sides. The box tray (lower box) is 'very good+' with one light crunch and a tape stain from the factory sealing tape. Please note that this kit must be shipped insured.