Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

AMT Lola T-8800 Newman Haas Kmart CART, 1/25, 6753

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. 1989 issue with over 80 parts. Features detailed engine and racing frame, full suspension, detailed racing cockpit and driver figure and more.

Scientific Stunt Master Control Line Gas Powered Flying Aircraft - For .020 to .075 Power, 25-395

Wood and Metal Model Kit,   Box Condition: Good+

Sold   

Highly prefabricated model from the mid 1960s. Features a fully carved wood fuselage that is also hollowed out, finished one-piece wood wing with perfect airfoil, die-cut wood tail assembly and other parts (still unpunched), die-cut plywood firewall, preformed wire part landing gear struts, metal controline hardware, plastic pilot bust, clear windshield with printed frames, full colorful decals, highly detailed text step-by-step instructions and a large number of assembly drawings, as well as full flying instructions. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Rio Grande Models D&RGW Air Dump Gondola OR/OS With Metal Trucks HOn3 Narrow Gauge - Craftsman Model, 1/87, 3001-AD

Wood and Metal Model Kit,   Box Condition: NM

Sold   

Highly detailed craftsman kit featuring laser cut and factory saw-cut hardwood parts, hardwood lumber stock, very fine metal castings, some plastic details and full, illustrated instructions. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Durango Press D&RGW Hi-Side Gondola HOn3 Narrow Gauge, 1/87, DP-112

Plastic Model Kit,   Box Condition: VG

Sold   

Very highly detailed injection molded plastic kit. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Model Masterpieces CONX Nbr 8 Tank Car Body HOn3 Narrow Gauge - Bagged, 1/87, 202

Resin Model Kit,   Box Condition: VG

Sold   

Early resin kit with cast metal details. Complete and never started, includes instructions. Please note that this model only contains the tank body and details; there is a plan and instructions to make the frame, but those wooden parts were never included.

Pioneer 2 Hawker Sea Fury T-20 and TWO Hawk Sea Fury, 1/72

Plastic Model Kit,   Box Condition: Good

Sold   

SALE!! Includes all three kits. All kit have not been started and are either in factory sealed bags or have been inventoried complete with all parts. Includes decals and instructions. The two Sea Furys are from newer molds and nicely done with all recessed panel line detail. Includes a color paint guide and decals for both FAA Historical Flight Yeovilton 1989 or Royal Canadian Navy 871 Squadron 1953. The Sea Fury T20 features all fine recessed panel lines, detailed gear wells and decals for the Royal Navy aircraft on the box art and the all red DLB aircraft.

Tamiya M3 Lee MkI Medium Tank, 1/35, MM139A

Plastic Model Kit,   Box Condition: VG+

Sold   

Excellent, older model. It has never been started. Inventoried with all parts present and includes decals and instructions.

Hobby Craft Seversky AP-7 Civil Racer - Bendix Trophy Winner / S-2 Ecuador, 1/48, HC1554

Plastic Model Kit,   Box Condition: Exc

Sold   

Nicely molded. Features all fine, recessed panel lines, 'very good' cockpit and engine detail, optional parts for two different variants and decals for two aircraft. One aircraft won the Bendix in 1938. After this win, Ecuador purchased four 'racers' and converted them into fighters in the FAE; parts and markings are included for this aircraft also. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

RCM DeHavilland DHC-5 Buffalo, 1/72

Vacuform Model Kit,   Box Condition: Bagged

Sold   

SPECIAL ORDER vacuform kit with resin/metal parts set. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic airframe components, full size plans plus metal or resin parts such as wheels, prop, struts, etc. Does not include decals. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

AMT 1940 Ford Sedan Delivery - Stock or Custom, 1/25, T253

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed. Nicely detailed kit. Features underside suspension and exhaust detail, stock Ford Flathead V-8 or tri-carb (3x2) Buick Nailhead engine, full interior, optional position rear cargo door and more. Other optional features include lowered front end, tube bumpers, Keystone mags, wide tires, custom decals, spotlights, tachometer, floor shifter, gauge package, header exhaust system, etc. Molded in color, clear, chrome and with rubber tires.

Life-Like 1949 Ford Tudor 2 Door Coupe - (ex-Pyro), 1/32, 09290

Plastic Model Kit,   Box Condition: Exc

Sold   

Ideal for slot car conversion. Life-Like release from original quality Pyro molds. Features detailed underside chassis with separately molded rear differential and drive shaft, full interior including door side panels and more. Never started. Inventoried 100% complete with all parts and instructions present. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. Even luckier is the fact that Life-Like reissued most of these kits.

Matchbox M47 Patton Tank, 1/32, 40990

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. I very strongly suspect that this is the ex-Renwal kit. Features rotating turret, elevating 90mm gun, hinged doors and hatches, flexible treads, detailed engine compartment and US Army decals.

Tamiya British Centurion MkIII Motorized, 1/35, MT130-698

Plastic Model Kit,   Box Condition: Exc+++

Sold   

Rare 1/35 scale motorized model with a completely metal gear box and all hardware. Even includes the RE-26 electric motor. Very nicely detailed and an excellent operating model when completed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Steve McQueen Bullitt 2008 Ford Mustang Bullitt, 1/25, 85-4233

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Special issue dated 2008. Features detailed engine and engine compartment, interior and underside.

Hasegawa TWO KITS Boeing B-47E Stratojets, 1/72, 1223

Plastic Model Kit,   Box Condition: Good

Sold   

SALE!! Includes two kit. NOTE: please read carefully. Very nicely detailed with fine raised panel detail, cockpit, open/closed bomb bay doors with internal iron bomb load, tail "stinger" and detailed landing gear with good wheel well detail. The kits have never been started. One is inventoried 100% complete with all parts and includes decals and instructions. NOTE: the other kit is missing two small parts: rear machine guns and the face plate for them. Otherwise inventoried with all other parts present, along with decals and instructions. The B-47 was a very advanced aircraft at the time. The XB-47 first flew in 1947. The big jet's speed was equal to or greater than all current fighter aircraft, so it received radar-controlled twin 20mm cannons in the tail as the only guns. Through the use of mid-air refueling, the B-47 gave SAC it's first all-jet force for nuclear or regular bomb delivery. Although it was tricky to fly, Stratojets flew into the mid 1960s. A program to strengthen the wings for low-level attack was responsible for prolonging the service life.

Revell Rickenbacker's Spad XIII - with Pilot and Two Crew Figures, 1/28, H235

Plastic Model Kit,   Box Condition: Exc++

Sold   

Very large 1/28 scale kit from 1975. This is a reissue of the famous 1957 'S' kit. Nicely molded and detailed for that time. Features 'Hat-In-The-Ring' 94th Aero Squadron markings for Captain Eddie Rickenbacker's aircraft, detailed Hispano-Suiza engine, removable inspection panels, detailed machine guns, full cockpit, rotating wheels and prop, very fine 'fabric' detailing over ribs and stringers and full rigging instructions. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Lincoln Douglas DC-7 - BOAC, 1/150, 105

Plastic Model Kit,   Box Condition: Good-

Sold   

Nicely made small scale kit from the mid 1950s to the very early 1960s. Never started. The small parts are still in the internal factory sealed bag, and the larger parts that were never sealed have been inventoried complete including decals and instructions. Lincoln was based in Hong Kong. Plastic kits were not the primary business, but they established quite a line of them before discontinuing production in the late 1960s/early 1970s. Many molds moved to Kader, also in Hong Kong, who reissued the line. Many molds eventually found their way to the USA either through ATP (who purchased the excess kit stock when Kader sold out) or IM.

Lincoln Lockheed Constellation - BOAC, 1/140, 102

Plastic Model Kit,   Box Condition: Good-

Sold   

In 1956/57, Lincoln leased or purchased some Hawk molds and this Constellation is one of those. Nicely done 1/140 scale model with full color BOAC decals. The kit has never been started. The small parts are still in the factory internal sealed bag and the larger parts that were never sealed are inventoried 1 complete including decals and instructions. Lincoln International was based in Hong Kong. Plastic kits were not the primary business, but they established quite a line of them before discontinuing production in the late 1960s/early 1970s. Many molds moved to Kader, also in Hong Kong, who reissued the line. Many molds eventually found their way to the USA either through ATP (who purchased the excess kit stock when Kader sold out) or IM.

IM Viscount British European Airways BEA and Lockheed Constellation BOAC - Bagged, 1/100, 7

Plastic Model Kit,   Box Condition: Good-

Sold   

Includes both kits including the rare 1/100 Vickers Viscount. They have not been started. The Viscount has the small parts still factory bag sealed; the parts that were never factory sealed are complete including decals and instructions. NOTE: the Constellation is about 1/144 and is missing the nacelles and props; includes all other parts and decals; no instructions. These kits are from ex Lincoln, ex Kadder molds.

IM Bristol Britannia BOAC - Bagged, 1/166, 12

Plastic Model Kit,   Box Condition: Good-

Sold   

Ex Lincoln, Ex Kadder molds. Close to 1/144 kit of the fantastic British Airliner. With full color BOAC decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: although all parts are present, two props assemblies are each missing a blade and the blades are gone. There is a tear in the instructions but no important assembly information is missing.