Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Valom Lockheed XFV-1 - Bagged, 1/72, 72007

Plastic Model Kit,   Box Condition: No Box

Sold   

Bagged kit - there is no box. The box is shown for reference only. Nicely molded and detailed kit with all fine recessed panel lines, photoetched details, a superb cockpit, painting guide and full decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Airfix De Havilland Sea Vixen FAW.2 - Royal Navy, 1/48, A11002

Plastic Model Kit,   Box Condition: Good

Sold   

From all new molds. Very highly detailed and well molded. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Sterling Fokker E-III Eindecker - 25 Inch Wingspan for R/C / Free Flight / Control Line, A23

Wood Model Kit,   Box Condition: Exc

Sold   

Big kit for RC, free flight or control line. This model includes a very large decal sheets, die cut balsa sheets, pre-cut strip wood, vacuform cowl, engine, machine gun, pilot and other parts, rubber tires with completely precarved wooden wheel hubs, preformed landing gear strut wires, hardware, tissue, rubber motor and prop. The kit has never been started. Inventoried 100% complete including decals and instructions. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they featured color decals, high-grade die cut balsa, vacuform plastic detail parts, plastic wheels (if required), finished wire landing gear, rubber motor and plastic prop, full size plans with instruction details and full instructions for conversion to RC or control line.

Airfix DC-3 Silver Cities G-AMYV or C-47 Dakota USAAF - T4 Issue, 1/72, 04003-1

Plastic Model Kit,   Box Condition: Good+

Sold   

Type Four logo release from the 1970s. Includes rare civil decals and paint scheme for G-AMYV Silver City Airliner and military C-47. Features moving ailerons, elevators and rudder, retractable landing gear, optional position cabin door and door configuration and four figures- paratrooper, airline steward and two pilots. Molded in silver and clear. Never started. Inventoried 100% complete with all parts, both decal sheets and instructions.

Tamiya Mitsubishi Zero A6M5c Zeke Type 52, 1/48, 6427

Plastic Model Kit,   Box Condition: VG

Sold   

Nicely molded with very fine recessed panel lines, highly detailed full cockpit and landing gear wells, optional drop tanks and unusual rockets, open or closed cowl flaps, one piece or three piece canopies, pilot, mechanic and decals for 6 aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Condor German Missile A4 / V2 With New Ware Project Bumper V-2 / WAC Corporal Conversion - Bagged, 1/72, 001

Plastic Model Kit,   Box Condition: VG

Sold   

Includes resin New Ware #LK001 Project Bumper V-2/WAC Corporal conversion designed for the (included) Condor kit. Project Bumper started in 1946. The rocket was two states - a V-2 with a modified nose part and the WAC Corporal on top. The first Bumper was launched from White Sands on May 13, 1948. Bumper flight B-5 took off on February 24, 1949 and the Corporal reached an altitude of 244 miles above the earth. This altitude would not be exceeded for years. Bumper was the first two stage liquid fuel rocket. As a combination of the Von Braun first stage and JPL upper stage, it foreshadowed the Juno 1, which would orbit America's first satellite less than 10 years late. The V-2 kit by Condor includes detailed launch pad and excellent painting guide. Never started. The parts are still in the factory sealed bag and includes instructions.

Aoshima Grumman F7F Tigercat, 1/72, 501-300

Plastic Model Kit,   Box Condition: Fair

Sold   

Interesting early Tigercat kit from Aoshima. This model is from original molds and is not from or a copy of the Monogram molds. Features fine raised panel detail, movable ailerons, rotating props with large spinners (as shown on the foreground box art aircraft), rotating wheels, pilot and a 2-bomb loadout. Neverstarted. Internal factory sealed bag including decals and instructions.

Testors 1925 Curtiss Racer R3C-2 / Gee Bee Racer / 1929 Travel Air Mystery Ship / 1932 Howard Ike / 1931 Supermarine S-6B - (ex Hawk), 1/48, 912

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

SALE!! Includes all five factory sealed kits from quality ex-Hawk molds.

Accurate Miniatures B-25C / B-25D Mitchell With Vacuform Canopy Set - 345th Bomb Group 'Dirty Dora' New Guinea 1944 or 7C North Africa - (B-25C/D), 1/48, 3431

Plastic Model Kit,   Box Condition: VG

Sold   

Includes a very nice complete set of transparencies in vacuform. Fantastically detailed kit with all fine recessed panel lines, 237 parts and a complete interior and bomb bay. Includes decals for 2 different aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Anigrand Boeing X-20 - (X20) - Bagged, 1/72, AA2077

Resin Model Kit,   Box Condition: VG

Sold   

Very well detailed resin model. Never started. The parts are still in the internal factory sealed bag and includes decals and instructions in 'new' condition.

Hasegawa USS Essex Aircraft Carrier, 1/700, WL-A108

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed but the seal has split on the right as shown. Very highly detailed 1/700 waterline kit.

Hasegawa USS Hancock Aircraft Carrier, 1/700, WL-A113

Plastic Model Kit,   Box Condition: Good-

Sold   

Very highly detailed 1/700 waterline model. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Pit Road (2) SP-57 Royal Navy Seafire (4) And Sea Hurricane (4) / MP-22 Me-321 And He-111Z Glider Tow Zwilling (1 Of Each) / PM-42 Dornier DO-X Flying Boat (1) / MP-23 Junkers Ju-390 (1) / Spitfire Mk I (5) PLUS White Ensign 1/700 Curtiss SOC Seagulls (3 Packets), 1/700, PM-29

Metal Model Kit,   Box Condition: NM

Sold   

SALE!! Rare limited edition precision cast metal models. These are still the only models available of these aircraft in this scale. Includes 6 factory sealed packets as shown. Includes all the aircraft in the quantity listed. Fantastically detailed and molded for this small scale. Plenty of decals are included for all the aircraft included. The White Engisn Models "Airstrike" #WEMAS7061 Curtiss SOC Seagull are resin cast, well detailed models. There are several models in each set, and there are three factory sealed sets total.

E&B Valley Railroad Co D&RGW Tool And Block Car Built - HOn3 Narrow Gauge, 1/87

Plastic Model Kit,   Box Condition: Good

Sold   

NOTE: fully assembled kit. It is assumed to be E&B because it is injection molded and looks like one of their kits; but I am NOT certain. It is mainly injection molded plastic. Quality of assembly is 'very good++' and the car was airbrushed to the same quality. Lettered for Rio Grande Denver & Rio Grand Western, car 034 "Tool & Block." The car has two small steps broken off and one step is present for an easy repair. One coupler is disassembled but all those parts are present also.

E&B Valley Railroad Co D&RGW 319 Coach Closed Vestibule With Trucks And Walthers Working Diaphragm - HO / HOn3 Narrow Gauge, 1/87, 3319

Plastic Model Kit,   Box Condition: Good-

Sold   

Includes Walthers 933-429 HO Working Diaphragm set, as well as Grandt Turnbuckles and metal wheel sets. Superb injection molded kit with plastic truck set and dummy couplers. Highly detailed with a large number of parts. While model aircraft mold makers and molding machine operators were claiming that you could not mold parts this fine, several model train companies, like E&B Valley, were busy proving them wrong. This is kit for the serious model railroader who demands prototype fidelity. Molded in black plastic. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Please note that these E&B kits did not come with decals.

E&B Valley Railroad Co D&RGW Open End Coach Factory Painted And Lettered With Trucks - HO / HOn3 Narrow Gauge, 1/87, 018-2321

Plastic Model Kit,   Box Condition: Fair

Sold   

Superb injection molded kit with factory painted sides, car ends and factory painted and lettered name boards. Highly detailed with a large number of parts including detailed plastic truck set and dummy couplers. While model aircraft mold makers and molding machine operators were claiming that you could not mold parts this fine, several model train companies, like E&B Valley, were busy proving them wrong. This is kit for the serious model railroader who demands prototype fidelity. Molded in black plastic. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Ulrich Erie Hopper Car Kit #113 And Canadian Pacific Flat Car #110 With Sprung Metal Trucks And Varney Gondola Model (In Globe Box) - HO Scale Craftsman Kits, 1/87

Metal Model Kit,   Box Condition: Good+

Sold   

SALE!! Includes three kits - two metal craftsman and one plastic kit. Each Ulrich model has pre-painted and lettered metal sides. The kits have never been started. All the parts are either still sealed in the factory envelopes or have been inventoried complete. With instructions. The Varney Gondola is a plastic kit that is factory painted and lettered for D&RGW, car #48. Includes trucks. All small parts are still in the factory sealed envelopes and includes instructions.

Pegasus Hanriot HD-1 - Bagged, 1/72, 20

Plastic Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. Limited production injection molded kit. Very finely and well molded. With full decals.

ESCI Lockheed F-104N NASA Starfighter, 1/48, 8447

Plastic Model Kit,   Box Condition: Good

Sold   

Rare NASA edition. The decals are in near mint condition. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Williams Brothers Le Rhone Rotary Aircraft Engine, 1/8, 301

Plastic Model Kit,   Box Condition: VG+

Sold   

Very nicely detailed, large 1/8 scale model features nine cylinders, crankcase, carburetor with sliding valve, accessory drive gears, oil pump, magneto, full wiring and display stand. The kit has never been started. Internal factory sealed bags including instructions. The 80 hp Le Rhone was developed before WWI and was used in many early aircraft. It did see service early in the Great War and it's follow on, the 110 hp Le Rhone was used in larger aircraft. The crankshaft of the Le Rhone mounted directly to the firewall and was part of the air and fuel intake system. The crankcase, propeller shaft and cylinders all revolved at about 1200 rpm. These three assemblies were carefully balanced to reduce vibration.