Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa P-51C Mustang 'Yellow Tail' - 2nd FS 52 FG Lt. Emerson 'Sit' / 5th FS 52nd FG, 1/72, AP12

Plastic Model Kit,   Box Condition: NM

Sold   

Limited issue kit with decals for both aircraft. Well molded and detailed with all fine recessed panel lines. Never started. Sealed factory bag with decals and instructions.

Fujimi Grumman E-2A Hawkeye, 1/72, 7A15-700

Plastic Model Kit,   Box Condition: Good-

Sold   

Finely molded older kit with recessed panel lines. Includes a full color painting guide (on the bottom of the box) and a large, colorful decal sheet for three aircraft from USS America, USS Constellation and USS Coral Sea (VAW-122 / VAW-113 / VAW-11). The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Please NOTE the box looks better than the 'good-' grade but is graded as such because there is damage and tape on the end panels.

Hasegawa TWO Aichi E13A1 a/b Type-Zero Jake - Prototype - Service or E13A1a, 1/72, JS056-150

Plastic Model Kit,   Box Condition: Good

Sold   

Includes TWO model kits. Very nicely detailed 1980s kit featuring very fine raised panel lines and recessed control surface lines, crew of three, good cockpit and engine detail and optional position engine cowl to display the engine. Includes paint guide and decals to make the Prototype (orange overall), a light gray service version or the green E12A1a or b variants. Never started. One model is still in the factory sealed bag and the other one has been inventoried 100% complete with all parts, decals and instructions.

MPC SBD Dauntless Profile Series Plus #2-0101 SBD Marine Dauntless With Crew, 1/72, 2-1115-100

Plastic Model Kit,   Box Condition: Good+++

Sold   

Includes BOTH kits in one Profile Issue box. In the 1970s, MPC released the very popular Profile Series. Inside the box was a quality Airfix kit but with MPC decals to build any of the three aircraft shown on the box top. Well detailed kit. Has parts and decals to make -3 or -5 versions. Well molded with raised and recessed detail. Features full interior with crew, optional position canopy, pivoting rear gun, working arresting hood and center line and wing bomb loads. One model has never been started and is inventoried 100% complete with all parts and decals present. NOTE: the other model has "professional" quality minor assembly as follows: wing light lens in the wing; cockpit tub; bomb halves and is missing 2 tiny antennas and bomb yoke. Inventoried complete with all other parts, decals and instructions present.

Revell Bell Huey Attack Helicopter UH-1D, 1/32, H259

Plastic Model Kit,   Box Condition: Good++

Sold   

1969 issue. Large well detailed kit featuring 18 inch rotor span, detailed Lycoming T53 Jet Engine with removable cowling, highly detailed interior and cockpit with opening cabin doors, moving rotors and weapons system with SS-11 Missiles, M-6 Machine Guns, 7.62 MM Machine Guns and M-6 Guns with Rocket Pods. Includes pilot and gunner figure and US Army First Air Cavalry markings. This kit has never been started. Inventoried complete with all parts, decals and instructions.NOTE that the box displays better than the 'good++' grade but is graded as such because there are short pieces of masking tape and clear tape on the long and short sides.

Revell Hughes OH-6A Cayuse or Civil Hughes 500, 1/32, H146

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. 1970 issue. Large 1/32 scale kit. Well molded with fine raised details, complete cockpit and compartment (for both military and civil), pilot figure, working main and tail rotors and optional weapons for the military version. Includes other parts and markings for civil or military.

Sign Rotabuggy 10/24 Flying Jeep / Hafner Rotabuggy / Malcolm Rotaplane, 1/72

Resin Model Kit,   Box Condition: VG++

Sold   

Rare. The only kit issued of this unique subject. Features very finely cast resin main parts, many photoetched brass parts, full decals and instructions including a painting guide. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The Hafner Rotabuggy (formally known as the Malcolm Rotaplane and as the M.L. 10/42 Flying Jeep) was a British experimental aircraft that was essentially a Willys MB combined with a rotor kite, developed with the intention of producing a way of air-dropping off-road vehicles. Although initial tests showed that the Rotabuggy was prone to severe vibration at speeds greater than 45 miles per hour, with improvements the Rotabuggy achieved a flight speed of 70 mph on 1 February 1944. The last test flight occurred in September 1944, where the unit flew for 10 minutes at an altitude of 400 feet and a speed of 65 mph, after being released by a Whitley bomber, and was described as "highly satisfactory." However, the introduction of gliders that could carry vehicles (such as the Waco Hadrian and Airspeed Horsa) made the Rotabuggy unnecessary and further development was canceled.

Tamiya Panzer IV Tiger I Sd.Kfz. 181 Ausf E Kommandant Otto Carius, 1/35, 35202

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1996 special edition that has markings for tank ace Otto Carius' vehicle. Also includes Lt. Carius figure with two crew (all in scale).

Tamiya T34/85 Russian Medium Tank, 1/35, MM-138

Plastic Model Kit,   Box Condition: Exc

Sold   

Very well detailed kit. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Mig-29 UB/GT Fulcrum Twin Seater - Luftwaffe Or Russian Air Force, 1/32, 04751

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory 'round tape' sealed. From 2011. Large and well detailed kit featuring 173 pieces, all fine recessed panel line detail, very good cockpit with optional position canopy, detailed gear wells, excellent inlet and exhaust, extensive air-to-air weapons loadout and more. Includes a large decal sheet for both versions.

Airmodel Douglas F3D-2 Skyknight - Bagged, 1/72, 154

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Still factory bag sealed. Nicely molded with fine recessed panel lines and clear canopy. Basic airframe components only. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Campbell Thru Timber Bridge - HO Scale Craftsman Kit, 1/87, 762

Multimedia Model Kit,   Box Condition: Good+

Sold   

Excellent model featuring very extensive factory precut and machined hardwood and other wooden details. The kit has never been started. The parts that were factory sealed are still factory sealed; the ones that were never sealed have been inventoried complete. With instructions and excellent full size plans.

Lindberg Vought F7U-1 Cutlass - (F7U1), 1/48, 2320

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed. Large scale Cutlass from the original 1950s molds and an ideal 'Classic Build.' Molded with fine raised details. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg F7U Cutlass - Cellovision Issue, 1/48, 556-98

Plastic Model Kit,   Box Condition: Fair++

Sold   

1950s large scale Cutlass with dramatic Ray Gaedke artwork. Molded in white with a clear canopy. Includes pilot figure, rotating wheels, display stand and colorful Navy decals. The kit has never been started. Inventoried 100% complete including decals and instructions. On the back of the box, the clear Cellovison pane is intact as well as the trading card for this kit. Please NOTE that the box is graded 'fair++' because it is missing one end flap, has the tear shown at the left and has the typical wear associated with the rather flimsy Cellovision issues.

Monogram Wright Brothers Kitty Hawk, 1/40, 85-0030

Plastic Model Kit,   Box Condition: VG+

Sold   

1999 reissue of the 1958 'Four Star' kit and most likely the the best injection molded model of the first aircraft to sustain powered, controlled flight. Excellent detail and includes rigging instructions. Kit also features figures of Orville and Wilbur Wright, monorail launching track and carrier dolly and historical accessories-"C" clamp, bench, can, spade and starting battery that were all present at the first flight. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Lindberg Douglas F4D-1 Skyray - (F4D1), 1/48, 2318

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed but the seal has drawn the back of the box concave. 1976 reissue of the famous 1950s kit. In this case, Lindberg retained the fantastic Ray Gaedke artwork from the original issue. Kit features fine raised details, moving rudder and wing control surfaces, complete jet engine and opening inspection cover, pilot, two drop tanks, underwing rockets and a clear display stand.

Cleveland Bayles 1931 Gee Bee Racer - Balsa Flying Aircraft, 1/16, SF17

Wood Model Kit,   Box Condition: VG

Sold   

This model came from a long-time collector. He ordered the model direct from Cleveland, mailing the USPS Money order on Sept. 2 and received the kit on October 6, 1955 - both receipts are enclosed. This is a Cleveland 'SF' or 'Scale Flying' model in museum scale of 1/16. All Cleveland kits were exceptionally complete and this one is no exception. Features very high quality balsa printwood and strip wood, sheet wood, pre-drilled wheel pants blocks, clear windshield material, fully finished cowling and wheels, finished thrust button and rubber retainer, metal stock in multiple sizes, rigging material, preformed prop blades, covering material, highest quality plans and more. The model has not been started. Inventoried 100% complete with everything present. The Cleveland Model and Supply Company played a pivotal role in the development of true scale models. In 1909 Bleriot's English Channel flight caused a surge in aviation and model aircraft around the globe. Several companies were ideally positioned to take advantage of the aviation craze. In the USA, Wading River Manufacturing Co. (1909), White Aeroplane (1911), Ideal Model Aeroplane (1911), Broadfield Model Aeroplanes (1919) were among these pioneers, offering everything from plans and parts to complete kits and ARF models. Lindbergh's 1927 crossing of the Atlantic Ocean caused an even bigger world-wide phenomenon called "The Aviation Craze" that extended up to the start of World War II. Many companies such as Megow, Guillow's and others started right around the time of Lindbergh's flight. Some of these models flew and flew well, but they all had one thing in common - were generally not accurate scale representations. In 1929, a youngster named Ed Packard had a very advanced dream- to produce incredibly accurate, true scale models that flew perfectly. This radical idea established the world's longest running single-owner (77 years) model airplane business- Cleveland Model and Supply Company. To this day, Cleveland models are treasured as the most accurate flying scale models produced. The fact that Mr. Packard started and successfully grew this business during The Great Depression is a testament to his ideals and business skill. I highly suggest the excellent book called 'Aviation's great Recruiter- Cleveland's Ed Packard' by H.L. (Herm) Schreiner. It is an excellent history of the man, his company and the times of the Golden Age of Model Aviation.

Cleveland Boeing P-26A Peashooter Flying Aircraft With Detailing Parts, 1/16, M-60

Wood Model Kit,   Box Condition: Good-

Sold   

Includes factory sealed William's Brothers #139 1.5" correct main wheels and tires and #136 correct size tail wheel as well as a very old and delicate two-piece light plastic or celluloid engine crankcase that also fits this kit. The actual model is identical to the Cleveland 'SF' or 'Scale Flying' model in museum scale of 1/16. It is simply a later part number. All Cleveland kits were exceptionally complete and this one is no exception. Features very high quality balsa printwood and strip wood, covering material, highest quality plans, all parts required for assembly and insignia. The model has not been started. Inventoried 100% complete with all parts and instructions. Although the box has wear, the kit inside is just like new. The Cleveland Model and Supply Company played a pivotal role in the development of true scale models. In 1909 Bleriot's English Channel flight caused a surge in aviation and model aircraft around the globe. Several companies were ideally positioned to take advantage of the aviation craze. In the USA, Wading River Manufacturing Co. (1909), White Aeroplane (1911), Ideal Model Aeroplane (1911), Broadfield Model Aeroplanes (1919) were among these pioneers, offering everything from plans and parts to complete kits and ARF models. Lindbergh's 1927 crossing of the Atlantic Ocean caused an even bigger world-wide phenomenon called 'The Aviation Craze' that extended up to the start of World War II. Many companies such as Megow, Guillow's and others started right around the time of Lindbergh's flight. Some of these models flew and flew well, but they all had one thing in common - were generally not accurate scale representations. In 1929, a youngster named Ed Packard had a very advanced dream to produce incredibly accurate, true scale models that flew perfectly. This radical idea established the world's longest operating single-owner model airplane supply business, called Cleveland Model and Supply Company. To this day, Cleveland models are treasured as the most accurate flying scale models produced. The fact that Mr. Packard started and successfully grew this business during The Great Depression is a testament to his ideals and business skill. I highly suggest the excellent book called 'Aviations great Recruiter, Cleveland's Ed Packard' by H.L. (Herm) Schreiner. It is an excellent history of the man, his company and the times of the Golden Age of Model Aviation.

Jo-Han 1935 Mercedes Benz 500K Roadster Limousine Sindelfingen Body, 1/25, GC1135

Plastic Model Kit,   Box Condition: VG+

Sold   

On April 9, 1935, this magnificent custom built automobile was delivered to Rudolph Carracciola, the Mercedes-Benz Grand Prix team driver. Rudy, with an impressive win record of 23 wins and 23 second places, had chosen this vehicle for his own personal transportation. Powered by the supercharged 5 liter engine, the large and heavy vehicle was an excellent performer and one of the finest cars of the 1930s. Well detailed kit with over 150 parts. Builds up a rolling chassis just like the real car. Features steerable wheels, removable boot, highly detailed engine and full chassis, double spare tires, detailed interior, opening hood and chrome spoked wheels. The model is molded in red, black, clear and a large tree of chrome-plated parts. Never started. Inventoried 100% complete with all parts and instructions present.

Lindberg Chrysler Atlantic Concept Car, 1/25, 72712

Plastic Model Kit,   Box Condition: VG+

Sold   

A very nice model molded in all the correct colors so painting is not required. Features detailed underside, full interior, rotating wheels and is molded in multiple colors of plastic, chrome plated plastic, clear and with rubber tires. The kit has never been started. The parts are still in the internal factory sealed bags and includes extensive decals (including instrument faces) and instructions.