Guillows Vought F4U Corsair 11 Inch Wingspan And Messerschmitt Me-109 11 Inch Wingspan - Rubber Powered Flying Aircraft, 26DC
Vaccuform Model Kit, Box Condition: Good
Sold
SALE!! Includes both models in the box. Both are never started and 100% complete with all parts and paperwork present. Both feature die-cut wooden parts, decorated (factory printed) profile fuselage, stick-and-tissue wings, plastic propeller, thrust button, covering tissue, full size plans and instructions for building and flying.
Hasegawa Aircraft Carrier Kaga, 1/700, WL-A081
Plastic Model Kit, Box Condition: Good+
Sold
Very highly detailed 1/700 waterline model that includes aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
AMT 1963 Ford 500XL Sport 2 Door Hardtop - 3 in 1 - Stock / Custom / Advanced Custom, 1/25, 6003
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. 1995 reissue from the original molds as the 1963 classic kit. Features basic V-8 engine or supercharged version, complete stock interior or custom interior with optional seats, seat belts, steering wheel, console, roll bar and mascot, detailed engine compartment and opening hood, side spotlight and air horn, stock exterior trim and custom trim including tubular grill, 'V' fins for the rear fenders, aerials, side pipes and side pipe 'Bullet Shrouds', fender skirts and more. Please NOTE AMT did not include body putty and sand paper with this issue, and AMT placed a note about this on the bottom of the box.
AMT 1963 Ford Galaxie 500 - Two Door Coupe (Hardtop), 1/25, 6501
Plastic Model Kit, Box Condition: Good++
Sold
Very nicely detailed kit features detailed underside, suspension and exhaust, detailed 406 CID engine, detailed engine compartment, opening hood, full interior and more. NOTE: this kit has minor, 'professional' quality subassembly as follows: stock engine long block built. There is no other assembly. The stock version is inventoried complete and includes decals, metal foil and instructions. NOTE: Missing about 20% of the custom parts and the pen holder/display base.
ESCI US-3A Viking C.O.D - (S-3A), 1/48, 4053
Plastic Model Kit, Box Condition: Fair+
Sold
Very nicely detailed and molded large-scale US-3A featuring complete cockpit, detailed landing gear and arresting gear wells, optional position crew boarding door and weapons bay doors, drop-tank shaped 'Blivets' cargo containers and decals for VS-33. The kit has never been started. Internal factory sealed parts bag including decals and instructions. The box top has significant age foxing, but the decals, instructions and parts inside are in 'factory-new' condition.
Pyro Bugatti Atalante Coupe, 1/32, C322-60
Plastic Model Kit, Box Condition: Good+
Sold
1960s Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of its kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. In some cases, the specific car and owner is on the box. The model includes colored injection molded parts, clear parts, detailed chassis, detailed engine and exhaust, removable hood, trunk mounted spare and complete interior. The kit has never been started and inventoried complete with all parts and instructions present.
Fujimi Type 61 Japanese Tank / Type 61 Japanese Tank / Hobby Boss IDF Merkava Mk IV / Trumpeter British Warrior Tracked Combat Vehicle, 1/76, 76037
Plastic Model Kit, Box Condition: Exc
Sold
SALE!! Includes all four kits. The two Fujimi Type 61 kits are both 1/76 scale the Warrior and Merkava are 1/72 scale. The Warrior is factory sealed; the other three kits are all Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Frog Curtiss P-40E Kittyhawk - Black Series Issue, 1/72, F391
Plastic Model Kit, Box Condition: VG
Sold
1960s issue that is nicely molded with all recessed panel line detail. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Airfix Avro Lancaster B.1 - Craftmaster Issue, 1/72, 3-129
Plastic Model Kit, Box Condition: Exc
Sold
1960s issue with colorful artwork of a Lancaster lifting off from the English countryside into a clear and star-lit sky. The model is well detailed for that time and features movable control surfaces, rotating gun turrets, props and wheels and optional position undercarriage. Molded in silver and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
AML Messerschmitt Bf-109D - Spanish Civil War Condor Legion Commander Oblt Siebelt Reents 1 J/88 Sept 1939 / Haupt Hannes Gentzen Commander 102/ZG2 Bemberg Oct 1939 / 1/JG71 Germany Oct 1939 - Bagged, 1/72, 72-028
Plastic Model Kit, Box Condition: No Box
Sold
NOTE: bagged kit; there is no box. The box is shown for reference only. Limited issue kit that cleanly molded, highly detailed and features all recessed surface detail, excellent resin cockpit, many photoetched parts, gear well detail and more. Includes full color paint guide and decals for all aircraft listed. Never started. All resin and photoetched parts are still factory sealed; the injection molded parts have been inventoried complete. Includes decals and instructions.
Bilek Yak-23 Flora - With Eduard Zoom PE - Soviet / Polish / USA Evaluation / Czech Air Forces, 1/48, 484
Plastic Model Kit, Box Condition: Good+
Sold
Hard-fo-find 1/48 scale Yak that features very clean moldings with all recessed surface detail, numerous color PE on an Eduard factory-painted sheet (numbered VB006 and designed for this kit), excellent cockpit and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. The Yak-23 was an early pre-Mig-15 Soviet jet fighter that also saw extensive service in the Warsaw Pact countries. Very much a pilot's airplane, the Yak-23 was well liked and advanced at the time. It was also the first Soviet fighter with an ejection seat.
FM MS-472 Vanneau, 1/48, 6027
Multimedia Model Kit, Box Condition: Good
Sold
Rare and the only 1/48 scale kit ever made of this subject. Very well detailed limited issue model features main injection molded parts, cast metal, resin and brass photoetched details. There are two complete canopy sets and they are still perfectly clear (not yellowed). Full decals are furnished. The kit has never been started. The small parts are still factory bag sealed; all other parts have been inventoried compete. Includes decals and instructions. NOTE: instructions are quality photocopies.
Comet Aeronca Chief - 54 Inch Wingspan for R/C for Free Flight, 3506
Wood Model Kit, Box Condition: Fair++
Sold
1970s very large scale kit with 54 inch wingspan for rubber or gas free flight or RC (radio control). The kit features traditional wood/tissue construction, high quality printwood, factory-cut spars and stringers, balsa nose block, metal prop shaft, clear window material, fully formed wheels and thrust button, rubber motor, covering tissue, factory-carved balsa propeller (just needs final sanding) and detailed full size plans with building instructions. The model has not been started. Inventoried complete with all parts and plans present. NOTE: this a factory flaw on the nose block; on the back there is a gouge measuring about 1.5" x 1/2" and 3/8 deep at the deepest point. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
Monogram B-24J Liberator with Diorama Instructions, 1/48, 5601
Plastic Model Kit, Box Condition: Fair
Sold
First issue from 1976 with the finest mold quality as well as the aircraft tow tractor and desirable Diorama Instructions. This model features extensive interior detail, rotating turrets, elevating guns, optional position side gun positions, full bomb bay with bomb load, steerable nose wheel, rotating propellers, optional position bomb bay doors and more. Never started. Inventoried complete with all parts numbers present and including decals and instructions.
Easy Built Models SE-5A Scout - 50 Inch Wingspan - (SE5A), FF-59
Wood Model Kit, Box Condition: VG+
Sold
Very large scale stick and tissue style kit. Features giant 50" wingspan, 7 sheets of printwood, factory-cut stringers and spars, balsa blocks and other wood stock as required, rubber motor, large 9.5" diameter plastic propeller, metal stock, covering material and well detailed, full-size plans. Never started. It has been inventoried complete with all parts.
Azur F-86K Sabre Dog - French Air Force Colmar Air Base France 1960 / French Air Force Hahn AFB Germany 1960 / Luftwaffe 3/WaSLw Oldenburg AB Germany 1960 / M. Lnz 2./JG 74 Neuburg AB Germany 1963/64, 1/72, A092
Plastic Model Kit, Box Condition: VG
Sold
Detailed limited run injection molded kit featuring all fine recessed surface detail, resin details, very good cockpit, detailed gear bays and more. Includes paint guide and decals for the four different aircraft listed. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
SNAP 105mm Gun Emplacement - (ex Adams), 1/40, 152
Plastic Model Kit, Box Condition: Exc
Sold
Rare early 1960s model from the original 1950s Adams molds. Well molded and detailed for that time featuring a display base, sandbags, elevating gun, moving trails, radio, shell casings, full shells, ammo box and crew of 5 in-action G.I.s. Molded in dark olive drab plastic. Never started and inventoried 100% complete with all parts, decals and instructions present. These molds must have had a very interesting history. They were cut in 1955 or 1956, either at Adams or by one of Revell's contractors. It appeared to be part of the Adams/Revell 1/40 line but Revell never issued the kit - they did issue their own 105mm howitzer, but it was completely different. The famous HO model train manufacturer Athearn then purchased the Adams molds. Ahtearn used the name SNAP for all plastic kit releases and slightly modified the molds by adding their name (SNAP) & logo to a part (or two) of each kit. This 105mm Gun Emplacement kit is made in the USA but is actually a SNAP export to Canada; the importer was 'International Games of Canada Limited' in 'New Toronto Ontario.' They used a silver overprint to block out the kit number and pric extension and then added '#152 in Canada $1.59'. Then UPC (Universal Power Master) either leased or purchased (probably the former) the Adams molds from SNAP in the 1960s. While most UPC kits say 'Made in Japan' the ex-Adams models do not and say 'Made in USA'. Things get even more interesting with the Life-Like issue. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk purchase of molds from Athearn since there were in the same general part of the country. This is simply conjecture, however.
Airfix Westland Whirlwind HAS Mk22 Or USAF Sikorsky H-19 Rescue, 1/72, 02056-9
Plastic Model Kit, Box Condition: Good
Sold
Very well detailed model from 1974 builds your choice of Royal Navy Whirlwind or USAF H-19 Rescue and has markings for both. Features very fine surface detail, complete cockpit, two pilots, working rotors, rescue hoist and more. With paint guide and decals for both versions. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Academy Grumman TBF-1 Avenger With Dangly Bits Correct Engine Nacelle/Nose - USN, 1/72, 1651
Plastic Model Kit, Box Condition: VG
Sold
Includes a factory sealed Dangly Bits high-definition case resin full nose (firewall forward) for this kit. The actual kit is from 1987. A nicely molded kit that features all fine recessed panel lines, detailed cockpit, optional position landing gear and rotating turret with elevating gun. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
ESCI AB-205 Transport, 1/72, 9005
Plastic Model Kit, Box Condition: Sealed VG
Sold
Still factory sealed and from about 1980. Very well molded and detailed Italian-built UH-1 in transport configuration features fully detailed cockpit and cabin with stretchers, four optional position doors, good engine and rotor hub detail, rotating main and tail rotors and more.