Revell Eurocopter EC-135 ADAC, 1/32, 04425
Plastic Model Kit, Box Condition: VG+++
Sold
Civil version in a large scale. Highly detailed inside and out. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
RSL Bristol Britannia 310 - BOAC, 1/125
Plastic Model Kit, Box Condition: Exc+
Sold
Rare. RSL kits were made in New Zealand during the 1960s. This is likely from Marusan molds. Nicely done older model with clear side and cockpit windows, rotating propellers, complete landing gear and colorful BOAC decals. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.
Aoshima IJN Katsuragi Aircraft Carrier, 1/700, WLA087-700
Plastic Model Kit, Box Condition: VG++
Sold
1/700 scale waterline kit. Very highly detailed and finely molded. The kit has never been started. Internal factory sealed bag including decals and instructions.
Fujimi IJN Hiei Battleship, 1/700, 0815-300
Plastic Model Kit, Box Condition: Exc
Sold
1/700 scale waterline kit. Very highly detailed and finely molded. All trees are still sealed in factory bags. Complete with instructions and decals (if furnished).
Aoshima Imperial Japanese Battleship Fuso, 1/700, WLB051-400
Plastic Model Kit, Box Condition: VG
Sold
Very highly detailed and finely molded. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. The box art shows Fuso steaming with a Takao class heavy cruiser and various aircraft overhead. Fuso was a most impressive vessel, seen here withthe fantastic, towering "pagoda" mast structure from her 1935 rebuild. Torpedo hits from Melvin reportedly sank the battleship Fuso at the Battle of Surigao Strait, 1944.
Ace Whitman Curtiss P-40 Tomahawk British Fighter - 15 Inch Wingspan Flying Wood Model, 3894
Wood Model Kit, Box Condition: Good+
Sold
1941 issue. The 'Ace Whitman' name was used by Joe Ott for some of his marketed kits. Joe Ott had a very popular line of wooden flying and non-flying kits in the Golden Age of flying models. The other 5 aircraft in this series are illustrated on the back of the box. This model comes with full size plans, sealed 'Ace Whitman' Tentacle Cement pack, very detailed assembly instructions (unusual for these types of kits), tissue, wood stock, printwood, block, pre-carved wheels and thrust bearing, rubber band, metal prop axle, colorful cut out insignia for markings and templates for front and side canopies and more. Never started. NOTE: missing prop. Otherwise inventoried with all other parts, instructions and insignia.
Comet Taylor Cub - 18 inch Wingspan Flying Balsa Airplane Model, 3602-98
Wood Model Kit, Box Condition: Exc
Sold
1970s reissue of the older kit. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998. Kit features traditional wood/tissue construction, detailed full size plans, building instructions, hardware (if required), tissue and propeller. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Monogram Bugatti 35B Grand Prix Racer 'Museum Pieces' Issue, 1/24, 8205-0350
Plastic Model Kit, Box Condition: VG+
Sold
'White Box' release from 1972. This highly detailed kit is molded in silver, nickel/chrome plate, blue, clear and includes authentic leather-like material for spare tire straps and flexible tires. Features a rolling chassis that builds up like the real car, fully detailed engine, suspension, exhaust and undercarriage, removable hood, full interior, driver figure, side-mount spare and more. Never started. Inventoried 100% complete with all parts and instructions. From 1924 to 1930, this 660 lb "Jack the Giant Killer" raced and won against the traditional 2,000 lb juggernauts of it's day. Other than light weight, the design had many first such as cast aluminum wheels with integral cast brake drums, solid forged bar front axle, two liter straight eight engine with single overhead cam and three valves per cylinder, two exhausts and one intake with the combined area of the exhaust valves greater than the intake to scavenge the burned gases and more.
Cutting Edge 1/32 F-16 Fighting Falcon ADF Tail Conversion - Bagged, 1/32, CEC32168
Resin Model Kit, Box Condition: Bagged
Sold
Hard-to-find conversion that gives an F-16 the ADF rear vertical fin. Very nicely cast and detailed. Never used and complete. Please note that Cutting Edge did not furnish instructions with this kit, but there are reference articles and photos of the ADF F-16 on the internet.
Hasegawa Grumman F9F-8 Cougar - (F9F8), 1/72, 1139
Plastic Model Kit, Box Condition: VG++
Sold
Late 1970s/early 1980s issue. Very nicely molded and detailed kit. Includes markings for VT-26 or Blue Angels Aircraft. The kit has never been started. Internal factory sealed bag including decals and instructions.
Huma Model Messerschmit Me P1101 V1 (P-1101) - Bagged, 1/72
Plastic Model Kit, Box Condition: VG++
Sold
The P1101 was the first aircraft to have variable geometry wings. As part of the Emergency Fighter Program, the Messerschmitt was a promising design but was only about 80% done when the war ended. This model is interesting in that it models the V1 Prototype exactly as it was found or as a production aircraft. This means you can show the detailed jet engine without the cowling or install the cowl. V1 decal sheet even includes the painted on machine gun/cannon. The kit has never been started. Inventoried 100% complete including decals and instructions.
Imai Chinese Junk with Sails, 1/135, 8082
Plastic Model Kit, Box Condition: Fair-
Sold
Small scale kit measures 4.75 inches long when assembled. Nicely molded and includes full sails, rigging thread and rigging diagram. The kit has never been started. NOTE: missing stand base. Name plate and two hull supports are present as well as all ship parts. Includes instructions.
Pegaso Chester Swee Pea with Airport Diorama (Ex-Lindberg), 1/48, P2040
Plastic Model Kit, Box Condition: Sealed VG
Sold
Still factory sealed. From ex-Lindberg molds. Includes a cardstock airport diorama.
Cutting Edge Israeli Air Force F-4 and RF-4 Phantom Kurnass (Sledgehammer) - Decals for 1/32 IAF Phantom - Two Sheet Set - Bagged, 1/32, CED32001
Cardstock Paper Model Kit, Box Condition: Sealed VG
Sold
Two sheets in 1/32 scale for Israeli Phantoms. NOTE: sheets are partial. On sheet is missing an '8', a '9' and a '1'. The other sheet is missing the 119th Sq Emblems, #41 and #42 small yellow handles3 Stars of David, and the #16 (one of three styles of 'Rescue' arrows in yellow). I believe this is all, but please judge for yourself as this set is sold as-is.
IsraDecal Israeli F-4 Phantom Part One - Two 1/32 Scale Sheets, 1/32, 9
Cardstock Paper Model Kit, Box Condition: Sealed VG
Sold
Two sheets in 1/32 covers at least 13 different Phantoms. Marking and painting guide included. Never used and as new.
Combat Models Republic F-105D / F-105F Thunderchief, 1/32
Vacuform Model Kit, Box Condition: Good+
Sold
Very large scale F-105 from Combat. The kit has never been started and is complete with all parts, clear canopy and plans. Vacuform models are for experienced model builders only - you must have significant scratch building skills and a well stocked spare parts box to complete these kits.
Matchbox F-86A/5 Sabre Jet - Col Francis Gabreski or Arizona ANG, 1/72, PK-32
Plastic Model Kit, Box Condition: Good+
Sold
Has markings for Gabreski's F-86 from the famous Korean War dogfight of July 8th, 1951 or colorful markings for Arizona Air National Guard with a yellow dragon. Never started. Factory sealed bag or 100% inventoried with all parts/decals and instructions present.
ARBA Messerschmitt Bf-109 G6-U2, 1/72
Multimedia Model Kit, Box Condition: Good+
Sold
Rare very high quality complete kit. Includes high definition resin body and wings, crystal clear vac canopy and cast metal details such as landing wheels, spinner, back plate, propeller, elevators, tail wheels, struts, gear doors and more. Quality of metal parts is excellent with no flash and great definition. The resin parts are excellent also - very well cast with all very fine recessed panel lines. The kit has never been started and is complete with all parts and instructions.
Revell Messerschmitt Bf-109E - Collectors Choice Issue - E3 Werner Molders - E4 Franz Von Werra (POW-escaped from Canada) - E-7 1/JG-27, 1/72, H63
Plastic Model Kit, Box Condition: Exc++
Sold
1974 issue with decals and parts for three '109 'E' variants. One of the decals is for Franz Von Werra's aircraft. Franz was taken POW by the British and sent to an overseas POW camp - where he became the only German to escape from a Canadian prison. He returned and continued to fly combat with the Luftwaffe where he became an ace with over 20 kills before he vanished. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Frog Messerschmitt Bf-109F Marseille or Galland Bagged, 1/72, F192F
Plastic Model Kit, Box Condition: Sealed Exc+++
Sold
Still factory sealed. Contains decals for Oberstleutnant Hans Joachim Marseille of JG27 with 101 kills, El Gazala North Africa 1942 and Oberstleutant Adolf Galland, JG26 France 1941 with 94 kills. Excellent kit with very fine panel line details. No rivets or other unrealistic engravings. Builds to a very realistic model.