Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

RCM Vultee Vengeance, 1/32

Vacuform Model Kit,   Box Condition: Bagged

Sold   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

Monogram F-4 C/D Phantom High Tech Series, 1/48, 5831

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. From 1990. Large and nicely detailed with a photoetched fret, full cockpit interior, optional position canopy, Sidewinder and Sparrow missiles, drop tanks, ECM pods and sitting and standing pilot figures.

Planes With Pants Mitsubishi A5M Claude Model 4, 1/32, 1

Resin Model Kit,   Box Condition: VG

Sold   

Rare. Kit number 25 of a very limited run from Planes With Pants located in Erie, PA. The founder was David Thompson and this was his first kit; others were planned but apparently not produced. This kit has been listed as an A5M2 by some sources, but David crossed that out on the instructions and wrote 'Model 4.' John Burn's guide says the Model 4 never appeared, but clearly it did. This is an excellent resin model with very clean castings and all fine recessed panel detail. It features very nice cockpit and engine detail, separately molded rudder, gun camera, optional drop tank and a vacuform clear canopy. There is even a resin plug if you need to make another canopy. The kit has never been started. NOTE: missing the rudder pedals. Easily made. Includes all other parts and well-illustrated instructions.

RCM Macchi MC-200, 1/32

Vacuform Model Kit,   Box Condition: Bagged

Sold   

Very large scale (1/32) SPECIAL ORDER vacuform kit with resin/metal parts set. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic airframe components, full size plans plus metal or resin parts such as wheels, prop, struts, etc. Does not include decals. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

Sea Scale 700 Royal Navy T Class Submarines Group 1 and Group 3, 1/700, 700-001

Resin Model Kit,   Box Condition: VG++

Sold   

Very Rare. Includes two beautifully case resin hulls (one Type 1 and the other Type 3), resin details and many PE details. Never started and complete with full instructions.

Roundhouse-Model Die Casting 40' AAR Metal Sheathed Box Car MKT - The Katy Line - Metal HO Craftsman Kit with Sprung Metal Trucks, 1/87, B107

Metal Model Kit,   Box Condition: VG++

Sold   

Includes real sprung metal trucks. Roundhouse (by Model Die Casting) was a famous manufacture of HO Craftsman kits in the 1940s/1950s. This is one of their all- metal car kits. Very well detailed and crisply cast with little or no flash. Molded in details are superb. Features all metal one piece roof, three piece roof walk, car ends, floor and undercarriage, factory painted and lettered sides for The Katy Line (yellow and black), three piece brake set, couplers, pocket doors, bushings, screws as needed, grab irons, full instructions with drawings and more. The prepainted sides are excellent. One of the four sides has a bubble in the paint that can be easily glued down. (See Photo, left) The roof, floor, ends, doors and car sides are very flat and straight for easy assembly. The kit has never been started. Most small parts are still sealed in the factory envelopes. The parts that were not factory sealed have been inventoried complete including instructions.

Main Line Models 50' Wood Sheathed Refrigerator (Reefer) - Railway Express Agency - HO Craftsman Kit, 1/87

Wood and Metal Model Kit,   Box Condition: Exc

Sold   

Very high quality wood and metal kit from the Golden Age of HO Craftsman kit. Builds a very accurate and highly detailed prototype of this Wooden Reefer. Kit features pre-cut and pre-scribed hardwood sides that are factory painted green and decorated with white, red and yellow lettering for Railway Express, cut and pre-milled hardwood 'round' roof and floor, hardwood pre-cut and scribed car ends, cast metal underframe, wood and metal stock as required, metal ladders, reefer doors, ice hatches, end sills and brake wheel, metal grab irons, brake details and more. The model has never been started. The detail envelope is still factory sealed, and the parts that were never sealed have been inventoried complete and includes full size plans/instructions. If you have an interest in these kits and the revolution they created in modeling, please read the article about their history located on this website. Please cut and paste this link in your browser to see it - http://www.oldmodelkits.com/blog/plastic-model-kit-history/the-ho-scale-model-railroading-revolution-of-the-1940s/

Paramount Her Majesty's State Coach, 1/30

Plastic Model Kit,   Box Condition: Good+

Sold   

Unusual big-scale kit by Paramount (UK) from the early 1960s. Very nicely molded for that time and is much larger than the Miniature Masterpieces/Revell issue. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Airfix North American P-51D Mustang Motorized Japan Issue - 'THIS IS IT' of Col Joe L. Mason 352 FG Bodney England or 'Ridge Runner' of Major Pierce w Mckennon 4th FG 335th FS Debden England, 1/24, 14001-2-5000

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare release from Airfix Japan with incredible high-gloss box art. This model is intended to be motorized and includes all required hardware except the motor (which Airfix did not provide). Very large 1/24 scale kit that is highly detailed. Features removable body panels showing complete Packard-Merlin engine and firewall, highly detailed cockpit with sliding canopy, retractable landing gear, moving control surfaces, detailed machine gun bays with removable panels and much more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Ambroid Riverside Insulated Oil Tank Car - HO Craftsman Kit, 1/87, 4

Wood and Metal Model Kit,   Box Condition: Exc

Sold   

High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts, extensive decals and full instructions and plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including transfers and instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.

Aurora MG TD Sports Car, 1/32, 511-49

Plastic Model Kit,   Box Condition: Good+

Sold   

From 1958. Hard-to-find second issue with classic artwork. From ex-Advanced molds. Kit features good outline, very good interior with seats, dash board, steering wheel and column and floor with carpet texture, convertible top cover, gas tank and filler cap, front and rear bumpers and real rubber tires. Molded in a bright gloss red. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Entex 1913 Ford Model T Delivery Van Coca Cola - with Real Wood Parts- Templeton & Sons Taxidermists / The Texas Company (Texaco) / Carnation Milk, 1/16, 8497

Multimedia Model Kit,   Box Condition: Good-

Sold   

Very highly detailed and well molded kit from the 1970s. From original Bandai molds. Builds up a rolling chassis just like the real vehicle. Features detailed engine with ignition wiring, full engine compartment with hoses and wiring, removable hood, full suspension, driveline and exhaust detail, steerable wheels, complete interior (down to the speedometer cable and individual clutch, brake and accelerator pedals and levers, a large sheet of micro wood trim so that the wooden parts of the kit can be accurately represented with in-scale wood grain, opening rear cargo doors, full van interior, opening passenger and driver doors, flexible fuel lines, headlight wiring, choice of decals and much more. Molded in gloss black, gloss ivory, brass plate, wood tan, clear, green tinted clear (sunshade) and with real rubber tires, rubber wires and cables, small metal parts and details and a sheet of precut in-scale grain wood. The kit has never been started. The parts that were factory sealed are still in the internal factory sealed bags. The parts that are not sealed have been inventoried 100% complete including decals and instructions.

Revell AC-47D Gunship - Spooky, 1/48, 04926

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Finally - the first injection molded C-47 in 1/48 scale! Features 118 parts, detailed cockpit, optional position cabin door, ammo boxes, flare dispensers, 3 miniguns on mounts, correct antenna suite, detailed landing gear, crew members and decals for two different USAF aircraft.

Trumpeter Grumman TBM-3 Avenger, 1/32, 02234

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very highly detailed, large scale kit with 492 plastic parts and also PE parts.

Revell HMS Hood Battlecruiser - For R/C Motorized, 1/388, 5032

Plastic Model Kit,   Box Condition: Good

Sold   

Rare model dated 1964. This is a bigger scale, full hull kit that Revell says "…is suitable for radio control operation, see special notes." Features movable rudder, one bigger drive prop and four dummy scale props, gearbox drive and turrets that rotate left and right as it sails. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The kit is from the original Lindberg molds; it would be interesting to know how Revell of Germany ended up with that tooling. While Revell notes that the plastic parts are present for motorizing, they also state that "metal and rubber parts, motor and cables are not included in the kit."

Revell Boeing PT-13D Kaydet / Navy N2S-5, 1/72, H649

Plastic Model Kit,   Box Condition: VG+

Sold   

Late 1960s/early 1970s two piece box Revell of Germany issue. Markings for either version are included. Never started. 100% inventoried complete with all parts, decals and instructions present.

Air Lines Douglas A-20 Attack Bomber - (ex-Frog), 1/72, 9803

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. From quality Frog molds. Box art is by the famous Jo Kotula who did 1930s covers for the magazine 'Model Airplane News' and later the Aurora box art of the late 1950s. Air Lines kits are all Frog molds that the Lines Brothers imported to the USA between 1964-1966. The kits, decals and instructions were made in England, then imported to the USA where Testors created the boxes with the colorful trading cards on the back. There are one or two trading cards on each box which show the boxart but not the advertising/logo. Some kits contain a Testors color painting guide also, but it is not specific to any model.

MPC 1977 Chevrolet Corvette - Stock / Street Machine / Custom Show Version, 1/25, 1-7705

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Can be built any one of the three ways listed. Features detailed engine and engine bay, opening hood, full interior, detailed underside and many optional parts.

MPC 1976 Chevrolet Corvette - Stock / Drag / Street Machine, 1/25, 1-7605

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. Can be built any one of the three ways listed. Features detailed engine and engine bay, opening hood, full interior, detailed underside and many optional parts.

MPC 1973 Chevrolet Corvette 454- Stock / Drag Racer / Street Machine, 1/25, 1-7305-225

Plastic Model Kit,   Box Condition: Good

Sold   

Well done model that can be built three ways. Includes numerous optional parts - stock 454 or Wankle engine, engine stand, chromed mag wheels, custom decals, injector stacks, drag slicks, roll bar and more. Features detailed complete engine, engine compartment, front wheels that steer, opening hood, full interior, rotating wheels, exhaust and underside detail. Molded in white, clear, red tinted clear, and chrome. With real rubber tires. The kit has never been started. Some parts are still in the factory sealed bags. The parts that are not internally sealed have been inventoried complete, including decals and instructions. Please NOTE that the decal backing paper has numerous light stains, but the actual transfers have no stains on them.