Bandai German Infantry No. 2, 1/48, 8243-125
Plastic Model Kit, Box Condition: VG
Sold
Contains the four figures shown, who can be built in a variety of combat positions. Also includes a very large number of accessories (dozens) and a color painting guide on the back of the box. Ideal for all 1/48 dioramas. The kit has never been started. It has been inventoried complete with all parts..
Revell Convair R3Y-2 Tradewind 'S' Issue - (R3Y2), 1/168, H238-98
Plastic Model Kit, Box Condition: Good+
Sold
First issue from 1956. Very colorful 'S' hardbox with great artwork. Nicely molded for the time with all recessed panel lines, opening front cargo door, rotating counter-rotating propellers and the clear Revell 'Globe' display stand. The model has never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.
AMT 1955 Chevrolet Nomad Station Wagon - Stock or Custom Versions, 1/16, T842
Plastic Model Kit, Box Condition: VG
Sold
Original issue with "T" kit number; not the common reissue. Can be built stock or heavily modified. Features detailed engine with vinyl ignition wires and water hose tubing, full engine compartment, opening hood, full interior, opening doors and more. Never started. All the parts that were factory sealed are still sealed; the parts that were not (one small chrome tree and the clear) have been inventoried complete. With instructions and decals. NOTE: there is a burn mark (from the ignition wire) on a side window.
Special Hobby Bell P-39D Airacobra With Squadron Book - 35th FS 8th FG Lt . I.A. Erickson Milne Bay PNG 1942 / Same Sq. Lt. Leder Aircraft / 36th FS 8th FG Donald C. McGee Port Moresby PNG June 1942, 1/32, SH32002
Plastic Model Kit, Box Condition: VG++
Sold
Includes the Squadron 'In Action' book for the P-39 as well as a magazine review of this kit. The actual model is very highly detailed with 197 parts and features injection molded parts in gray and clear with recessed panel lines, cast resin parts, two frets of PE parts and decals for the three airplanes listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Hasegawa McDonnel Douglas RF-101C Voodoo, 1/72, JS037
Plastic Model Kit, Box Condition: VG
Sold
Earlier hard-box issue, likely from the late 1970s. Has decals for two high-visibility paint jobs with colorful tail markings. The kit has never been started. Internal factory sealed bag including decals and instructions.
AMT 1997 Ford F150 4x4 Extended Cab Pickup Truck, 1/25, 8308
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Molded in a gloss body color, clear, red tinted clear, chrome plate and usually also black and silver (I cannot confirm this one since it is still factory sealed).
Yunyj Tyechinik Mikoyan Gurevich Mig-21F - Bagged, 1/50
Plastic Model Kit, Box Condition: Sealed NM
Sold
Unusual near-1/48 scale Soviet model. This release is from 'Yunyj Tyechinik', which succeeded MZMPI (which was the first kit manufacturer in the USSR) and continued till a new name was introduced in the mid 1970s. Features fine raised panel lines, pilot and full landing gear. Molded in gray, white and black. Never started. The aircraft has been inventoried complete but NOTE: missing the display stand. Includes instructions and from what I can tell, it did not come with decals.
Yunyj Tyechinik Yakovlev Yak-18 - Light Acrobatic Aircraft, 1/40
Plastic Model Kit, Box Condition: Fair+
Sold
Classic Cold War kit in large 1/40 scale. This is a 'Yunyj Tyechinik' ('Young Mechanic') release and not the earlier MZMPI. This company succeeded MZMPI (which was the first kit manufacturer in the USSR) and continued till a new name was introduced in the mid 1970s. Good Soviet kit molded in bright green, black, white and clear. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Yak-18s have been observed in service with the North Korean air force as recently as August 2018.
12 Squared 1960 AMC Rambler Custom Station Wagon Promo, 1/25
Plastic Model Kit, Box Condition: Good-
Sold
Rare, all original friction drive promo. The car is complete with very nice paint and chrome. The glass has no damage but could use a good cleaning. Tires are like new - never played with or rolled, always adult owned. Due to general light wear and the need for cleaning, I would grade this one 7 out of 10 with 10 being flawless. With some time and cleaning your could easily make it an 8.5. NOTE: there is a chipped off and missing corner on the chassis (underside). The box is an original Jo-Han but NOT correct to this model.
Monogram Vandal Wild Custom Street Van With Mini-Bike, 1/24, 6657
Plastic Model Kit, Box Condition: VG+
Sold
Dated 1973. Very nicely molded and featuring an exposed engine dug-out with a blown V-8, driver's compartment clear bubble, opening side door and tail gate, full 'living room' interior with mod posters, swag lamp and simulated carpeting, good suspension and 'cockpit' detail, full decals and an excellent mini-bike that rides on the back bumper. Molded in gloss black, chrome plate, clear and with rubber tires. There has been no assembly but NOTE that one inner panel has one light brush stroke of paint. There is no other painting. Missing one tail light. Otherwise inventoried with all other parts, decals and instructions present.
Airfix Wasa Swedish Warship, 1/144, 09256-8
Plastic Model Kit, Box Condition: VG
Sold
Large scale highly detailed kit of the famous sailing ship. Nicely molded. This kit has 229 parts and includes full rigging instructions and vac billowing sails. The kit has never been started. The parts are still in the internal factory sealed bags and includes a large, colorful flag sheet and instructions.
Life-Like Cutty Sark Clipper Ship - (ex-Pyro), B248-125
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. From the early 1970s and original Pyro molds. Full hull kit measures almost 10 inches long when assembled. Full hull kit with very good molded detail including wood planking and grain and copper plates below the waterline, pre-molded ratlines, detailed deck, billowing sails and display stand. Molded wood brown and off-white. A photo of the built kit on the instructions serves as a standing rigging diagram. This is one of the 'intermediate' line of Pyro ship kits, which at the time were Pyro called '$1.00 Models'. All were roughly the same size and were a significant increase in detail from the '50 Cent Models'.
Revell HMS Victory - Lord Nelson's Flagship, H363-298
Plastic Model Kit, Box Condition: Good+
Sold
NOTE: builder kit only; please read below. 1960 hardbox issue, possible the first issue. As with most all Revell early ship kits, the model is finely molded and very well detailed. Model is about 15 inches long when assembled. Features full detail on the top two decks, prefabricated rat lines, vac sails, full rigging material and instructions and display stand. Includes a like-new tube of Revell S Cement. The model has never been started. Inventoried 100% complete with all parts, flags and instructions. NOTE: the follow parts are cleanly broken. All parts are present, but will need to be repaired: #12 breastworks, #39 rail, #111 deadeye(2 arms), #109 deadeye and #90 mast base. Also, the right lower hull has a closed crack that is 1.5 inches long.
Bandai Jagdpanzer Hetzer 38(t) 75mm (Kfz 138) Pz Jag Wag 638/10, 1/48, 8239-250
Plastic Model Kit, Box Condition: Sealed VG++
Sold
Still factory sealed. Rare kit that is part of the classic and highly detailed 1/48 Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be posed in almost any position.
Scale Flight Comet's Corben Super Ace - 16 inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Scale Flight Spartan Executive (Fighter) - 20 inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Scale Flight AMCO's Curtiss A-3 Falcon - 16 inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
AMT Star Wars Cantina Action Scene Diorama, 8205
Plastic Model Kit, Box Condition: VG
Sold
Still factory sealed. From 1998. Complete diorama contains 16.5 x 11 inch Cantina with full interior, over a dozen figures, and over 50 parts total. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.
Revell Mitsubishi J2M3 Raiden Japan Issue, 1/32, H288-700
Plastic Model Kit, Box Condition: VG++
Sold
Very rare 1971 Revell Japan hardbox issue with hardbox and unique box artwork. There are two Japan issues, and this is the first of the two. As with most Revell Japan issues, there are special features. This one includes a large, full color painting of the aircraft as well as decals for a total of 4 different aircraft - one from the 352nd, one this is not named and three from the 302nd. Paint guide is included for all four as well. Well detailed with full cockpit, complete engine detail with removable cowling, retracting landing gear and optional position canopy. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Frog Lockheed Ventura PV-1 Bomber/Reconnaissance, 1/72, F240
Plastic Model Kit, Box Condition: VG+
Sold
Very rare. Near the end, Frog had projected several future kits. In the case of the Ventura, the molds were cut but the kit was never released. Around 40,000 boxes were made anticipating production. Most of the boxes were destroyed. A unknown number of decals sheets were produced. There are no instruction sheets reported. The mold was put in the machine and 100 test shots were run - the only Ventura run at Frog. The 100 test shots were not sold but some found their way into collectors hands. This example is in a 'very good+' box with four solid corners and light general wear. It contains the decals and all parts. It is molded in gloss dark blue and clear, which is correct for the test shots. The kit has never been started and is complete. Please note there are no instructions as none were ever made. Shipping insurance is required for this kit.