Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Bandai Russian Medium Tank T34/76 - (T-34/76), 1/48, 057373

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Rare 1/48 scale kit from the classic and highly detailed Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be assembled in almost any position.

JB Models THREE LWB Landrover With Soft Top, 1/76, 1

Plastic Model Kit,   Box Condition: Good

Sold   

SALE!! Includes three complete kits in the one box shown. #1 is still factory sealed inside. #2 and #3 are never started and inventoried complete with all parts and includes decals and instructions present.

Anigrand North American XB-28 Dragon, 1/72, AA2068

Resin Model Kit,   Box Condition: Exc

Sold   

Very nicely detailed model featuring all fine recessed panel lines, good cockpit, full decals and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. In 1939, the USAAF issued requirement for a new medium bomber which could operate at high-altitude to avoid attack from ground fire. Martin and North American responded with the requirement, Martin submitted the Model 182 which was redesigned from the B-26 Marauder, and North American proposed NA-63 which was based from the B-25 Mitchell. In 1940, North American's design was chosen to entry the development, and was received contract for two prototypes that designated XB-28. The first prototype made its first flight on April 1942, and was proved an excellent design, with significantly better performance than the B-25. However, USAAF changed the requirement and rejected the XB-28 project as it was to be found that high-altitude bombing was too susceptible to errors caused by wind, cloud cover. The second prototype was completed as the XB-28A reconnaissance version. At the same time, most medium bombing during the war was done successfully from low altitudes, and it was decided not to interrupt Mitchell production for an untried type, the XB-28 project was canceled.

Bandai Cowboy Beebop Sword Fish II - (Swordfish II Spike Spiegel), 1/72, 0077174

Plastic Model Kit,   Box Condition: Exc+

Sold   

Rare model that is well molded and detailed. Includes the Sword Fish II fighter with many action features and the three figures shown on the box top in very large scale (probably bigger than 1/24; Spike is a full 3 inches tall). Molded in red, black, clear and ivory. Never started and the parts are still in the internal factory sealed bags and includes instructions. If you know Japanese, Bandai has included a fold-out, illustrated story of Cowboy Bebop.

Aurora Convair VR XFY-1 Pogo, 1/48, 60-98

Plastic Model Kit,   Box Condition: Exc

Sold   

Final issue box design from 1957 to the final year in 1959. Please note that the factory eliminated the old rectangular logo with a yellow triangle and put the new 'Famous Fighters' oval logo in the center. The box is in very nice 'Excellent' condition with like-new color and gloss, no price tags or tag marks, no tape or tape marks (not even factory tape marks!) and four solid corners. Flaws include very light corner wear and a very light crease at left and light impact damage on the upper short side. Rare, large scale model features working counter-rotating props and is molded in gloss silver and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The decals are 'very good++' with the only flaw being the typical yellowing and the instructions are also 'very good' with edge wear to the lower side.

Lindberg 32 Pick-Up Rod - Customized 1932 Pick Up Truck, 1/24, 603-69

Plastic Model Kit,   Box Condition: Exc

Sold   

This kit is from 1963 but is in the wrong box. The box top has been cut out and put on another box. This model is one of Linberg's better efforts and features a detailed V8 engine with 6 carb stacks, firewall, removable hood, rear differential & front suspension, very good interior, bed cover, exhuast stack and more. Molded in white and clear plastic and includes decals for the box art truck. Never started and inventoried complete with all parts and includes decals and instructions.

Verneuil 1905 Panhard Tonneau Roi Des Belges - Europe Model Kits, 1/32

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare and well detailed kit of this historic automobile from the time when France clearly lead the automotive world in technology and quality. This happened largely because the French people, government and authorities embraced the horseless carriage; this was the opposite of what happened in most countries, especially Great Britain where they regulated it almost completely out of existence. Includes 86 parts in black and clear plastic, large fold-out, heavily illustrated instructions with painting guide, history and text assembly instructions in both French and English. Never started and the parts are still in the internal factory sealed bags and includes instructions.

Verneuil Panhard Coupe de Ville 1895 - Panhard et Levassor Coupe - Europe Model Kits Issue, 1/32

Plastic Model Kit,   Box Condition: Good

Sold   

The 1895 Panhard has earned a place along side the innovators and forerunners of the first modern cars. Rare kit of this historic automobile from when France clearly lead the automotive world in technology and quality. This happened largely because the French people, government and authorities embraced the horseless carriage; this was the opposite of what happened in most countries, especially Great Britain where they regulated it almost completely out of existence. Nicely detailed and molded with 50 parts in black and clear plastic. Includes large fold-out, highly illustrated instructions with painting guide and automobile history in French. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. After initially acquiring a license to produce the Daimler gasoline engine, Panhard made engines for fledgling car makers. However, it was not long before Panhard and Levassor decided to produce their own vehicles. Following production of rear-engined vehicles, in 1891 they standardized what would become the norm for car design for decades to come: front-engined, with a front-mounted radiator, driving though a sliding-mesh gearbox to the rear wheels. It was called 'Systeme Panhard.' In 1894 Panhard developed a very modern clutch and for the 1894 Paris–Rouen Race, Alfred Vacheron equipped his 4hp with a steering wheel; it is believed to be the first use of such. In 1895, 1.2-litre Panhard et Levassor vehicles finished first and second in the 49-hour Paris–Bordeaux–Paris race, with one being piloted solo by Levassor himself. During the 1896 Paris–Marseille–Paris race, Levassor was seriously injured in a crash. He died in Paris in 1897.

Flyline Models Kinner Sportster - 39 inch Wingspan for R/C Or Free Flight Or Static Display, 1/12, 106

Wood Model Kit,   Box Condition: Good

Sold   

Museum quality scale model in large 1/12 scale. Very large kit for RC or built for static display. Flyline Models was a manufacturer out of Fairfax, Virginia USA. The models are known for their high quality. The kit contains full size detailed plans, instructions, high quality printed balsa sheets, printed balsa nose blocks, stringer and spar stock, clear material for the windshield, decals, hardware and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Anigrand Republic XF-103 Thunderwarrior, 1/72, AA-2020

Resin Model Kit,   Box Condition: NM

Sold   

Very highly detailed model cast in high-definition resin. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Marui Toyota Supra Motorized With Working LIghts, 1/24, MT-83-DC1-800

Plastic Model Kit,   Box Condition: Exc+

Sold   

This kit is designed to be motorized with a Mabuchi FA-130 or RE-14 motor and has provision for working headlight and tail lights. Features choice of right or left hand dash & steering wheel assembly, rear wheel motor drive, hardware pack, wiring, gears, on/off switchable lights, retracting headlamps, steerable front wheels, complete interior down to felt carpet, detailed chassis and more. All wiring and hardware is furnished for motorizing but Marui did not include the motor. Molded in red, black, chrome plate, clear and with rubber tires. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. "Tilt" was the market name for Tokyo Marui Plastic Model Company Limited. They were famous for their action motorized models which were produced in numerous subjects.

Tamiya M2 Bradley Infantry Fighting Vehicle, 1/35, 3632

Plastic Model Kit,   Box Condition: Exc

Sold   

Very highly detailed kit with full interior, commander figure, movable turret, nylon mesh for vane detail, raised or stowed TOW missile launcher and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Jo-Han 1956 Plymouth Belvedere Promo - Short Kit - (Promotional Model), 1/25

Plastic Model Kit,   Box Condition: Exc

Sold   

Includes the body, green-tinted windshield, two red-tinted clear tail light lenses and chrome plated front & rear bumpers and four wheels/hub caps. The chrome plating is in 'near mint' condition with only very slight and small flaws. This is called a 'short kit' because it does not include an interior, steering wheel, rubber tires or axles. These are from the original Jo-Han molds but are likely reproductions made in the 1990s. They came with a collection of promo bodies, windshields and chrome parts. Please note that these are made with a newer plastic that has very good gloss but does not warp. These are perfect replacements if you wish to restore your warped Plymouth Promo. This body is molded in ivory plastic.

Revell Speed Shop Express Chevy Sedan Delivery - Special Edition 1 of 10000, 1/24, 85-2976

Plastic Model Kit,   Box Condition: Good

Sold   

From 1998 and features 112 pieces, 8 cylinder Chevy 409 CID big block engine, opening hood, optional 1953 or '54 grilles, detailed underside and much more. Never started and inventoried complete with all parts and includes decals and instructions. NOTE: the decals have bug damage to the backing paper only; the actual transfers look fine.

Clear Creek Models DSP&P C&S 27 Foot Box Car HOn3 Narrow Gauge - HO Scale Craftsman Kit, 1/87, 413

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Excellent, highly detailed model features beautifully injection molded plastic main parts & very fine details, metal stock and full instructions.

Funaro & Camerlengo D&RGW Short Wood Caboose With Decal and Trucks - Resin HO Craftsman Kit, 1/87, 1001

Resin Model Kit,   Box Condition: Good

Sold   

Very highly detailed modern craftsman kit. The main parts are cast from high definition resin, which is superior in detail to injection moldings. Smaller details are resin, plastic and metal as required. Includes detailed instructions and plans as well as decals for D&RGW. Never started. The parts are still in the internal factory sealed bags and includes two sheets of decals and instructions.

MPC 1976 Chevrolet Vega - Stock / Rally Racer / Street Machine, 1/25, 1-7427-250

Plastic Model Kit,   Box Condition: Good++

Sold   

Rare original issue from late 1973 and even rarer in never started and 100% complete condition. Can be built one of three ways. Rally and Street versions include many optional parts and even a 350 CID V-8 option. Features complete engine and detailed engine compartment, opening hood, full interior, rotating wheels, exhaust and underside detail. Molded in white, clear, red tinted clear, and chrome. With rubber tires. Inside, the kit is as it left the factory. The white parts are still in the factory sealed bag. The clear and chrome parts were never factory sealed and have been inventoried complete. With decals and instructions. Decals are in 'excellent' condition and the instructions are 'excellent' as well. NOTE there are two tires burns: one is at the top of the right rear side window; the other is on the right edge of the rear window.

Revell USS Missouri Narrow Box - First Issue Pre 'S' Kit, 1/535, H301-198

Plastic Model Kit,   Box Condition: Good

Sold   

First release 1953 hardbox pre 'S' kit and the first ship model that Revell cut their own molds for. Earlier Revell ship releases were ex-Gowland and Gowland molds for the small scale sailing ship series. It has been said that this kit was so popular for so long that it was Revell's best selling ship model of all time. Inside, the kit is molded in the correct medium gray. It has never been started. Inventoried 100% complete including all parts, the original small parts 'krinkle' bag (torn open), flag sheet and instructions. The early style flag sheet is in 'very good' condition and the instructions are the correct very large format for this issue and in 'very good' condition with the typical age yellowing and some short closed tears. Please note that Revell did not furnish decals with this issue.

Revell 1895 American La France Water Tower - American Firefighters - Pre S Issue, 1/48, H706-169

Plastic Model Kit,   Box Condition: Exc+

Sold   

1955 issue with fantastic box art. Features three highly detailed horses, hitch, metal chain, carriage with frame detail, three firefighters and a Dalmatian dog. Molded in the correct white, red and gold. Never started. All of the red and gold parts are still in the factory sealed bags; the white parts and few large parts that were never sealed have been inventoried complete with the instructions. The American Firefighters models have an interesting history. Marlin first cut the molds in 1952 and issued the six original American Firefighters (Chemical and Ladder, Steamer, Hook and Ladder, Water Tower, Aerial Ladder and Hose Reel) in 1952. Revell signed a marketing agreement with Marlin in 1953. Five of the kit were released with the Revell name and marketing name 'Collectors Kits, Closter N.J.' Revell added the horse parts as they were not originally part of the Marlin issues. These first issues were from when Revell still had the marketing agreement, and those boxes say 'Trade Mark Copyright 1953 Marlin Toy Co. Inc' on the box top and 'Collector's Kits, Inc, Closter, N.J.' on the side. Upon termination of the marketing agreement in 1955, Revell purchased the molds and released the much fancier Pre S issue, like this Water Tower kit for sale here. These model made excellent display pieces, but they never caught the imagination of young men like jet aircraft did. The five molds were shipped to Brazil. After run by Kikoler (Revell Brazil's Distributor), they were shipped back to the USA but the molds were lost at sea.

Amodel Yak-28PM Firebar, 1/72, 7244

Plastic Model Kit,   Box Condition: VG

Sold   

A good model of this attractive aircraft. The Yak-28P variant was a dominate Soviet Homeland supersonic interceptor from 1964 until 1983. The Yak-28PM (this model) was one of several experimental Yak-28P versions. This one was intended to be a modernized 28P with new advanced turbojet engines; but when the advanced engines failed to deliver, the '28PM project died with them. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.