MPM Bucker Bu-181 Bestmann - Luftwaffe 1940 / German Civil D-ETAL 1939 / Czech Military Flying School 1946, 1/48
Plastic Model Kit, Box Condition: Exc
Sold
Limited issue injection molded model featuring photoetched details, film instruments, excellent cockpit detail, main injection molded parts with recessed panel lines and two decal sheets for all three aircraft listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. s.
Modelcraft F-82B Twin Mustang Long Range Fighter, 1/48, 48-020
Plastic Model Kit, Box Condition: Good
Sold
Large-scale Twin Mustang "B" variant that is nicely detailed with over 110 parts. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Includes decals for Betty Joe on the box art.
Academy F-15E Strike Eagle With ASAT Missile, 1/48, 1687
Plastic Model Kit, Box Condition: VG
Sold
Very nicely detailed kit with all fine recessed panel lines, detailed cockpit and gear wells, optional position speed brake, ASAT missile, Sidewinder missiles and more. Includes a decal sheet for box art aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Scale Structures Limited Gas Station With Visible Pumps - Late 1910 through 1920s - HO Craftsman Model, 1/87, K101
Wood and Metal Model Kit, Box Condition: VG
Sold
Very nice model featuring numerous cast metal parts including gas pump bases and tops, nozzles, sash windows, pump island, door, oil drums, Oil Hi-Boy, oil can rack, bottles, bulk oil can, car hose, air compressor, tire pump, tire, tools and more, wire, clear material, hardwood stock, color signs, cardstock die-cut building walls, full plans and detailed text instructions. Never started. The small parts are still factory sealed. The few parts not sealed have been inventoried complete.
Revell 1965 Chevrolet Stepside Pickup Truck, 1/25, 85-7677
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Well detailed kit with 121 pieces including stock 283 V-8 engine, opening hood, full interior, one piece molded bed, commercial graphics and more. Molded in white, transparent red and clear with chrome plated parts.
Tamiya Jeep Grand Cherokee Limited V8, 1/24, 24127
Plastic Model Kit, Box Condition: Exc
Sold
Highly accurate model dated 1993 that features full engine detail, opening hood, completely reproduced exterior & interior, functional front and rear suspension, extensive decals and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hasegawa Fieseler Fi-156C Criquet Armee De L'Air - (Storch), 1/32, 08149
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. Special edition big scale French Storch that is very well detailed. Features complete interior, highly detailed engine and firewall, removable cowling, optional position doors and wire landing gear. Includes decals for the aircraft shown on the box art.
Flexifoil Windbag Parafoil Ultralight - 12 Square Foot Parachute Wing Paraplane for R/C, 7003
Wood and Metal Model Kit, Box Condition: Exc+
Sold
Rare model from 1985. Designed for Radio Control operation, the Windbag has a big 12 square inch parachute for an airfoil. The wing breaks down to 'pocket size' for transporting. The wing is mounted on the top of an alloy kingpost which gives it an exceptionally low center of gravity so it is totally self stabilizing. From any maneuver, simply release the controls and it will revert to level flight. Even in a totally stalled condition, it will simply lower slowly. But you are more likely to enjoy the fast climb rate and outstanding manoeuvrability including loops. Features precision made softwing with no finishing requjired, compount tapered, virtually unbreakable GRP mainspar, rugged 6 strut light alloy main gear undercarriage, alloy mount for tought 3mm ply foreplane, tubular alloy for kingpost and nose boom, all pre-drilled and pre-formed alloy componants, steerable nose wheel, 3 large diameter balloon wheels, birch ply for the fuselage pod, all materials for the streamlined cockpit, comprehensive accessory pack with all R/C linkage, connectors, screws nuts and more & complete step-by-step instructions with plans. Also includes an RC Model World review and flight tips dated March 1985 that also has a copy of the original advertisement. The model is complete. The hardware is still in the factory sealed clear bag and the alloy parts are all factory sealed as well. The few parts that were not factory sealed have been inventoried complete. Please NOTE that the fuselage pod has been professionally assembled and painted. The quality of work is better than a factory built. NOTE that this item will be shipped in the factory-original sturdy shipping box unless you specify otherwise. If you do wish to have it boxed, extra shipping will apply.
MPC 1928 Ford Truck / Pickup With Sting Ray Bicycle - Stock / Show / Street, 1/25, 304-150
Plastic Model Kit, Box Condition: Exc
Sold
From the 1960s- note the early MPC logo. Original issue with great artwork. Very well detailed for that time and includes parts to build any one of three versions. Features detailed and separately molded front and rear suspension & exhaust, steerable front wheels, stock engine and Ford Flathead custom engine with dual carbs, stock spoke wheels, full interior, racing and custom wheels with slicks, bed with custom tonneau cover, custom exhaust extensions, bedroll, custom fender lights and even a scale Sting Ray bicycle. Molded in black, chrome plate, clear, white and with rubber tiresNever started. The parts that were factory sealed are still in factory sealed bags. The parts that were never factory sealed (chrome and clear) have been inventoried complete. With instructions and decals. Decals have minor tire burn damage but the plastic parts are free of burns.
Hobby Craft Philippine P-26 Peashooter, 1/48, HC1559
Plastic Model Kit, Box Condition: Good-
Sold
Nicely molded and features all recessed fine panel lines, detailed cockpit, optional position entry hatch, detailed engine, rigging diagram and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions but NOTE: the decals are water damaged and destroyed. The instructions are usable but have damage also.
Special Hobby Fiat G-50 Finnish Version - (G50), 1/48, SH48086
Plastic Model Kit, Box Condition: VG+
Sold
Very well detailed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tauro Model Macchi MC-202 Folgore, 1/48, 303
Plastic Model Kit, Box Condition: Exc
Sold
Very highly detailed kit with over 130 parts. The engine and engine compartment alone is over 25 parts. Includes highly detailed gun bay, cockpit, independently molded rudder, aileron, elevator and flaps, optional position landing gear, optional tropical filter and canopy, and removable gun bay and engine cowls. Has decals and detailed painting guide for mulitple aircraft. Never started. Factory sealed bag with decals and instructions.
Monogram F3F-3 Grumman Navy Fighter - (F3F3) Four Star Issue, 1/32, PA70-198
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed but the seal has several splits. Original issue Action Model from 1961. Features a unique system of landing gear operation: when you pull the prop outward and rotate it CCW, the landing gear retracts. Then pull it outward and rotate it CW, and the gear extends. Push the prop in, and it freewheels as normal. Other features include movable control surfaces, detailed cockpit, full decals, sliding canopy, bracing material and instructions for rigging. Molded in red, yellow, silver and clear.
Revell Lotus Slot Car Racing Body, 1/32, R1023-100
Plastic Model Kit, Box Condition: Exc
Sold
Rare kit from 1963. Beautifully molded racing body in dark blue plastic, clear windshield, chrome parts tree, roll bar driver's head and decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Balboa Class A 20 Ton Shay Brass Locomotive Katsumi HO Scale, 1/87
Metal Model Kit, Box Condition: VG+
Sold
Beautiful brass locomotive, hand-built in Japan by Katsumi for Balboa Scale Models of San Diego, California. This one-owner model has always been carefully stored in the original box. The original clear plastic protective sheet and all three factory gray foam 'cradle' sections are present and in 'excellent' condition. The small parts are still in the factory sealed bag. Under 14x magnification, the drive wheels show the tiniest bit of wear, so it has probably been lightly run 2 or 3 times. I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." There Balboa instruction sheet is present.
Key Imports 2-8-0 Consolidation C-18 #318 HOn3 Brass Locomotive and Tender Samhongsa - Weathered, 1/87
Metal Model Kit, Box Condition: Exc+
Sold
Beautiful brass locomotive and tender, hand-built in Japan by Samhongsa for Key Imports. This one-owner model has always been carefully stored in the original box. The original re-tinted clear plastic protective sheets and all three factory red foam parts are present and in 'excellent' condition. The small parts are still in the factory sealed zip lock bag. Under 14x magnification, the drive wheels show the tiniest bit of wear, most likely from the Samhongsa run. The factory paint and lettering is in outstanding condition. The model has been 'very lightly weathered' to professional standards as shown in the photo. I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." There is no paperwork present.
Key Imports Rio Grande Southern 2-8-0 Consolidation C-17 #42 HOn3 Brass Locomotive and Tender Samhongsa - Weathered, 1/87
Metal Model Kit, Box Condition: Exc+
Sold
Beautiful brass locomotive and tender, hand-built in Japan by Samhongsa for Key Imports. This one-owner model has always been carefully stored in the original box. All three factory red foam packing parts are present and in 'excellent+' condition. The drive wheels show that this locomotive has been run many times; it is not in 'mint' or 'new' condition. The factory paint and lettering is in very good condition. Please this model has been 'moderately weathered' to professional standards as shown. Other than the addition of two scale crewmembers, I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." The Key Imports data sheet for this kit is present.
Key Imports D&RGW 2-8-0 Consolidation C-19 #346 HOn3 Brass Locomotive and Tender Samhongsa, 1/87
Metal Model Kit, Box Condition: Exc
Sold
Beautiful brass locomotive and tender, hand-built in Japan by Samhongsa for Key Imports. This one-owner model has always been carefully stored in the original box. The original re-tinted clear plastic protective sheets and all three factory red foam parts are present and in 'excellent+' condition. Under 14x magnification, the wheels show that this locomotive has been very lightly run -perhaps 2 or 3 times. The factory paint and lettering is in outstanding condition. The model has been 'very lightly weathered' to professional standards as shown in the photo. I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." The Key Imports data sheet for this kit is present.
Key Imports Colorado & Southern C&S 2-8-0 Consolidation B-4E #71 HOn3 Brass Locomotive and Tender Samhongsa - Weathered, 1/87
Metal Model Kit, Box Condition: Exc+
Sold
Beautiful brass locomotive and tender, hand-built in Japan by Samhongsa for Key Imports. This one-owner model has always been carefully stored in the original box. The original optional metal 'pipe' part that was supplied with the kit is present and has never been attached. The original re-tinted clear plastic protective sheets and all three factory red foam parts are present and in 'excellent' condition. Under 14x magnification, the wheels show that this locomotive has been very lightly run -perhaps 2 or 3 times. The factory paint and lettering is in excellent condition. Please this model has been 'moderately weathered' to professional standards. I see no modifications to the engine or tender and I believe them to be complete with no missing or broken parts; but please examine the photos for yourself! Ask me if you need something checked more closely. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." There is no paperwork present.
United Denver South Park & Pacific DSP&P Mason Bogie 2-6-6T HOn3 Narrow Gauge Brass Locomotive, 1/87
Metal Model Kit, Box Condition: NM+
Sold
From 1966 and part of a rare, limited production run. Even rarer in investment-grade condition inside and out; please read carefully and examine the photos as you may know more about this engine that I do. Beautiful, like-new condition brass narrow gauge locomotive, hand-built in Japan by the famous United Scale Models. The original box is in amazing 'near mint+' condition. Inside, the model is still wrapped in the original plastic that is printed in blue with 'UNITED' and their logo. All of the internal packing material is present and perfect - the two pieces of 'sponge' material, the foam cutout and the original internal white cardboard spacer. This one-owner model has always been carefully stored in the original box. Under 14x magnification I cannot see but the slightest wear on the wheels, so I would grade it as 'never run' although it was probably test run at United before shipping. I can see no missing parts, but again, please check the photos and ask questions. There is nothing broken but one small link and rod has come off; this is easily repaired. I have no narrow gauge track, so I am unable to test the locomotive, so it is sold "As Is." There is no paperwork present. Must be shipped insured.