Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Fujimi North American Rockwell F-86F Sabre - JASDF, 1/72, F-18

Plastic Model Kit,   Box Condition: Sealed Exc+++

Sold   

Still factory sealed but the seal has split. This model dates from when Fujimi made the finest models in the world. Features all very fine recessed panel lines, detailed cockpit, air inlet + compressor fans, gear wells and even the backs of the gear doors, optional position speed brakes and two piece canopy as well as very colorful JSDF markings.

Fujimi Aichi B7A2 Ryusei Kai 'Grace' - Yokosuka Flying Group, 1/72, 2

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. High quality model from when Fujimi made the finest kits in the world. Features all fine recessed panel lines, rotating propeller, detailed cockpit, gear wells, torpedo load and optional position landing gear.

Hasegawa HMS Vanguard Royal Navy Battleship Motorized, 1/450, 6

Plastic Model Kit,   Box Condition: Good-

Sold   

Rare,larger scale kit of the last British Battleship that is designed for scale display or operation in water. Nicely molded with 145 parts. Includes prop, shaft, motor and all needed hardware for operation in water; easily converted to R/C (radio parts not included and electric motor not included). Includes an excellent, full color painting guide on the box side. Never started. All plastic parts are still in factory sealed bag. The hardware bag was opened and I inventoried it - it is complete. With instructions.

Matchbox Curtiss SBC-4 Helldiver - US Navy USS Enterprise Group Commander 1940 or RAF Cleveland 1 'A' Flight 24 Sq Hendon 1940 - (SBC4), 1/72, PK-35

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Dated 1983. Contains decals for either version and a full color painting guide. USN version is 'Hi-Vis' with silver dope and yellow wings.

Scale Flight Vultee A-11 Attack - 20 inch Wingspan Dime Scale Flying Airplane, Dime, 1295

Wood Model Kit,   Box Condition: Good-

Sold   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Scale Flight New Taylor Cub - 16 inch Wingspan Dime Scale Flying Airplane, Dime

Wood Model Kit,   Box Condition: NM

Sold   

Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Revell Mitchell Bomber B-25 B or B-25C Doolittle's Aircraft, 1/48, H285

Plastic Model Kit,   Box Condition: Good-

Sold   

1976 issue. Contains markings for Col. Doolittle's Aircraft and North African Campaign B-25C. Features movable and retractable lower turret (or cover for raider), three crew, detailed engines with removable cowlings, rotating props and wheels and optional position bomb bay doors and bomb load. Never started. Inventoried 100% complete with all parts, decals and instructions.

Airfix Wasa Swedish Warship, 1/144, 09256

Plastic Model Kit,   Box Condition: Good++

Sold   

Large scale highly detailed kit of the famous sailing ship. Nicely molded. This kit has 229 parts and includes full rigging instructions and vac billowing sails. Never started. Inventoried 100% complete with all parts, a large sheet of colorful flags and instructions.

PM Model SIAT 223 Flamingo - Turkish Air Force, 1/48, PM006

Plastic Model Kit,   Box Condition: Good-

Sold   

Nicely molded kit. Features very fine panel detail, full cockpit and very nice decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Hudson Miniatures 1911 Brush Model C Delivery Old Timers, 1/16

Wood and Plastic Model Kit,   Box Condition: Exc

Sold   

Dated 1949. Large scale and very well detailed for that time. Features numerous die-cut and machined/cut to shape wooden parts, beautiful plastic wheels, grill, steering wheel and other accessories, metal louvered hood, metal stock and parts and die-cut cardstock. Although all of Hudson's 1/16 kits are excellent, this one has even more detail than usual thanks to Hudson's engineers having access to the actual car owned by Mr. Austin Clark. This kit has never been started. Inventoried and NOTE: missing the cylindrical headlamps (can be made from stock material of the right diameter). Otherwise inventoried with all other parts present and instructions/plans. Please note, there are adult notes written on the plans to improve the accuracy of the model. The owner of these kits was a keen researcher and actually won a Hudson Miniature Old Timers Model Building Competition. The Brush Delivery Model C was manufactured by Brush Runabout Company, which was a division of the famous United States Motors. It sold for $650 and was powered by a one cylinder 64 HP engine linked to a gear-set type two speed + reverse multiple disc clutch transmission. Hudson Miniatures created a very popular line of automobile kits in a constant 1/16 scale shortly after WWII. The kits sold very well...so well that you could argue that Gowland & Gowland borrowed Hudson's subject matter for their ground-breaking 'Highway Pioneers.' The Hudson Miniatures 'Old Timers' even spawned a line of imitators, with Fador's 'Smallster' being one of the better in quality. Sales did drop on the appearance and popularity of the much smaller (and less accurate) Gowland/Revell 'Highway Pioneers' in 1951. When the all-injection molded Gowland kits proved not to be a passing fad, Hudson quickly planned and released his own all-plastic, small-scale competition called 'Lil' Old Timers Quickie Kits.' The kits were of excellent quality, but it was too little too late. Additionally, sales of the excellent wooden kits faltered further in the next few years with the introduction of accurate, 1/24 and 1/32 all-plastic cars in the mid 1950s. This forced Hudson to discontinue the wood kits and the plastic line was sold to Revell and subsequently re-released. Today, these excellent, big 1/16 kits are often the only model available of these early automobiles. In the mid 1960s Aurora thought so highly of Hudson Miniatures that they purchased the wood kit assets and released a very small number of these in all-plastic models.

Scale Models 1928 Ford Model A Town Sedan - (ex Hubley), 1/20, 4007

Metal and Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. One of a series of popular and desirable metal and plastic kits from ex-Hubley. The metal castings are very well done and detailed. Features cast metal body, frame, hood, engine, suspension and more, many injection molded parts including wire wheels and interior seats. Includes real rubber tires. Features steering front wheels, full rolling chassis with engine, exhaust, suspension and driveline just like the real car, removable hood, complete interior, aft trunk (luggage) and more. Kit likely dates from the 1980s.

KMP Models Spar Tree With Boom Loader or Yarder or Combination - HO Scale Craftsman Model, 1/87

Wood and Metal Model Kit,   Box Condition: Exc++

Sold   

Superb, high quality model that lists three building options in the instructions. Features hardwood lumber, custom white metal castings and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes extensive instructions and detailed plans.

KMP Models Willamette Loader Steam Donkey - HO Scale Craftsman Model, 1/87

Wood and Metal Model Kit,   Box Condition: Mint

Sold   

An excellent model with Northeastern scale hardwood lumber, custom white metal castings, Grandt & Campbell detail and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Aurora Temco TT-1 Jet Trainer, 1/43, 139-98

Plastic Model Kit,   Box Condition: VG

Sold   

Dated 1962. This is the nice ex-Strombecker kit reissued after Aurora bought the molds when Strombecker ceased model production. Molded in yellow and clear plastic with the clear triangular 'world' stand. Inventoried 100% complete with all parts, decals and instructions. NOTE: the box displays much better than the 'very good' grade but it ranked as such because the right side panel is faded. Also, there is red marker on the instructions where someone underlined each part as they did an inventory of the parts.

Lindberg Hawker Hunter With Tow Tractor - RAF / Swiss / Peruvian Air Forces, 1/48, 536-100

Plastic Model Kit,   Box Condition: Good+

Sold   

Late 1950s hardbox issue and great Ray Gaedke artwork. Includes markings for all three air forces and is absolutely loaded with operating features. Has removable rear fuselage, complete removable jet engine, moving rudder, elevator and ailerons, retracting landing gear, cockpit detail, ejecting pilot, loadout with drop tanks and rockets, tow bar, tractor with driver and display stand. Molded in white and clear with the yellow tow tractor. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: the instructions have adult building notes neatly written on them.

Lindberg Dodge Little Red Wagon A100 - Builds Stock or Race Truck, 1/25, 72158

Plastic Model Kit,   Box Condition: VG++

Sold   

Nicely done kit that can be built as a stock A100 delivery or work truck or the world-famous race vehicle. Features full frame construction like the real truck, detailed suspension and driveline, full interior, opening hinged doors, two fully detailed engines (Dodge 273 V-8 and Hemi-Head racing 426 CID), opening and closing tailgate and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell 1980s Ford Mustang Cabrio Convertible, 1/25, 7324

Plastic Model Kit,   Box Condition: Good

Sold   

1982 issue. Features detailed engine and compartment, removable hood, full interior, optional top and top boot, decals and more. Molded in red &clear and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Campbell Deck Timber Bridge - HO Scale Craftsman Kit, 1/87, 761-725

Multimedia Model Kit,   Box Condition: VG

Sold   

Excellent model featuring very extensive factory precut wood, other wooden details and other materials as well. The kit has never been started. The parts that were factory sealed are still factory sealed; the ones that were never sealed have been inventoried complete. With instructions and excellent full size plans.

The Building and Structure Co Building #1 The Yard Office - HO Scale Craftsman - Bagged, 1/87, 2050

Wood Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. Excellent all laser cut wooden kit. With full instructions.

Goldline Products Hermosa Creek Bridge - HO Scale Craftsman - Bagged, 1/87, GL-100

Wood Model Kit,   Box Condition: Sealed

Sold   

Still factory sealed. Beautiful craftsman style kit of this D&RG Howe Truss type bridge built around 1881 at mile post 452.4 just north of Durango, Colorado. The kit is designed to NMRA standards. Although shown as a 3 foot bridge, it can be used for 2 or 2.5 foot gauge also if you center the central stringers below the rails; no other changes are necessary.