Hasegawa Focke-Wulf FW-190D-9 Dora - III/JG54 Oct 1944 / JG26 1944 - (FW190D9), 1/72, 105
Plastic Model Kit, Box Condition: Exc+
Sold
Includes both decals. Very nicely molded and detailed kit. Includes some cockpit detail, pilot, detailed gear wells, all recessed panel lines and choice of two canopies. This kit has not been started. The parts are either still in the factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Airmodel Dornier Do-17 P-1 - Reconnaissance Bomber Conversion with Decals - (Do17P1) - Bagged, 1/72
Plastic Model Kit, Box Condition: Exc+
Sold
Injection molded conversion features excellent front fuselage section moldings with decals and full instructions. Never started. Inventoried 100% complete with all parts, decals and instructions. Conversion kit only - requires base kit. The superb Monogram base kit is recommended. The long range reconnaissance Do-17 P-1 featured two BMW 132N Radial engines and Rb 20/30 and Rb 50/30 cameras. P-1s saw service with the Aufklarungsgruppen till 1943 over France, Norway, Russia and the Western Desert as Do-17 P-1/Trop. The decals are for 3.(F)/Nacht in Russia from December of 1943.
Revell F-18A Hornet - VF-11 USS Forrestal, 1/32, 4707
Plastic Model Kit, Box Condition: Exc
Sold
1980 issue of this large, very early F-18 featuring very fine raised and some recessed panel detail, detailed gear wells and 'good' cockpit, excellent landing gear with rubber tires, wingtip mounted missiles and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
MPC The General 4-4-0 American Standard Steam Locomotive, 1/25, 1-2001
Plastic Model Kit, Box Condition: Good-
Sold
Builds a museum quality kit of the legendary locomotive. The kit is composed of over 330 parts and is over 25 inches long when assembled. Includes roadbed & rail base. Molded in red, black, clear, gray, dark wood tan and with brass plated parts and pinstripe decals and lettering. The kit has never been started. Almost all parts are still in the internal factory sealed bags. The brass plated and black parts were not factory sealed, so I inventoried them. The brass parts are complete. NOTE: missing 2 parts, a black seat back and reserve valve rod. Both can be made; the rod is the easiest since it is flat and can be made from stock sheet plastic. Otherwise complete and includes decals and instructions. NOTE: decals are intact but are 1/3 water stained.
MPC The Wild Ones 1929 Ford Pick-Up or Woodie Wagon With Bicycle, 1/25, 300-149
Plastic Model Kit, Box Condition: VG++
Sold
Rare, early kit with early MPC logo, probably from the mid 1960s. A very highly detailed model for that time featuring parts for either pick up truck or Woodie Wagon, full front and rear suspension, exhaust and driveline, steerable front wheels, complete stock Ford Flathead engine + parts for a custom Flathead as well, removable hood, very realistic wood grain side panels, complete interior (stock and with custom parts), optional convertible top (pickup), many accessories (battery, surfboard, skateboard, bedroll and more) , a complete scale Sting-Ray bicycle and the character "Hot Curl." Molded in gloss black, clear, chrome plate, rubber white wall tires, stock tires and more. Never started. It has been inventoried complete with all parts and includes woodgrain and instructions. There is a small tire burn at the corner of one flat clear part.
Renwal Lt. Col. R Collishaw's Sopwith Triplane with Aeroskin Fabric, 1/72, 266-69
Plastic Model Kit, Box Condition: Good
Sold
Contains pre-colored Aeroskin fabric created to resemble fabric covered aircraft. No painting needed since all designs are printed on the fabric. You build the inner structure of the aircraft then cover it, similar to the construction of the actual aircraft. Never started. Inventoried 100% complete with all parts, Aeroskin and instructions.
SIG Mr. Mulligan Racers / Moncoupe / Customaire / SIG Tiger - Balsa Flying Airplanes, FF-25
Wood Model Kit, Box Condition: Sealed NM
Sold
SALE!! Includes all 4 kits. They are all factory sealed with near mint boxes.
SIG SIG Tiger - 21 inch Wingspan Balsa Flying Model, FF-22
Wood Model Kit, Box Condition: Exc+
Sold
Typical high quality SIG kit with complete building and flying instructions, full size, detailed plans, plastic propeller, wheels, contest rubber, die cut parts, covering material and full decals. Stick and tissue construction with big 21.5 inch wingspan. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.
Faller Wright Flyer WR03, 1/100, 1903
Plastic Model Kit, Box Condition: Good
Sold
Rare model kit from the early 1960s and nicely molded for that time in white, light blue and clear. Although in a small scale, the kit is designed so you can rig it and rigging diagrams are included. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Even includes the original Faller packing inspection quality control sheet.
Revell Ju-52/3M (G5-G9) Ambulance or Ski Versions, 1/72, H2018
Plastic Model Kit, Box Condition: Exc
Sold
NOTE: ideal builder kit only, has been started. Please read carefully. Rare version. Kit features full 'field hospital' interior with stretchers, full cockpit detail, or 'ski' interior. Can be finished in winter camo ski version or ambulance with landing gear. NOTE: this kit has 'professional' quality subassembly as follows: arms on stretcher bearers; back to one bench; cockpit and bulkheads to floor; ski, wheel and cowl ring halves; landing light (in bottom of wing), engines to exhaust pipe assemblies, elevators (4 parts) and wing halves (4 parts). There is no other assembly. There is professional quality paint to the engines and exhaust only. Inventoried 100% complete with all parts, decals and instructions present.
Revell Junkers Ju-52 /3mW or Ju-52 /3M - (Ju523nW) - Bagged, 1/72, H2017
Plastic Model Kit, Box Condition: No Box
Sold
Bagged kit - there is no box. The box is shown for reference only. Builder kit only. Very well molded with fine corrugated external surfaces. Features optional parts for land or seaplane, complete cockpit, cabin interior , detailed engines, optional position cabin door and optional defensive machine guns and decals for Create 1941 and Med seaplane 1942/43. NOTE: this kit has 'professional' quality subassembly as follows: cockpit and cabin; wing halves + flaps and ailerons; elevators; cowl rings; wheel pants halves; wheel halves; engines and exhaust pipes. There is minor 'professional' painting to the engines and exhaust pipes. Inventoried 100% complete with all parts, decals and instructions present.
Hasegawa Northrop F-5A Freedom Fighter - USAF, 1/72, JS016
Plastic Model Kit, Box Condition: VG
Sold
Nicely molded older kit with full weapons load of Sidewinders, drop tanks and Bullpups. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Hasegawa Northrop T-38A Talon (F-5B) - USAF or Canadian Air Force, 1/72, JS018-100
Plastic Model Kit, Box Condition: VG++
Sold
Nicely detailed older kit that includes Canadian and USAF decals. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Campbell Mine Head Frame - HO Scale Craftsman Kit, 1/87, 352-395
Multimedia Model Kit, Box Condition: Exc
Sold
Excellent model featuring very extensive factory precut wood and other materials as well. The kit has never been started. The parts that were factory sealed are still factory sealed; the ones that were never sealed have been inventoried complete. With instructions and excellent full size plans.
Rio Grande Models Dolbeer Donkey Engine - HO Craftman Model, 1/87, 3035-DD
Wood and Metal Model Kit, Box Condition: Exc
Sold
Highly detailed craftsman kit featuring factory cut hardwood parts, very fine metal castings, metal stock as required and full, illustrated instructions. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.
Durango Press Handcar HOn3 Narrow Gauge - Craftsman Model, 1/87, DP-22
Metal Model Kit, Box Condition: Good-
Sold
Very highly detailed cast metal model. The kit has never been started. The parts are still internal factory sealed and includes instructions.
Airfix De Havilland 121 Trident IC - British Airways, 1/144, 03174
Plastic Model Kit, Box Condition: Exc
Sold
Dated 1993 and a nicely detailed model from the original 1960s Type 3 logo molds. Features 61 pieces, optional position passenger and baggage doors, optional position landing gear and airstairs and a very nice decal sheet for three British Airways registrations: G-ARPD, G-ARPN and G-ARPR. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Lindberg Tirpitz German Battleship Motorized, 1/350, 764M-500
Plastic Model Kit, Box Condition: Good+
Sold
Hard-to-find first issue in a hardbox dated 1965 with very colorful box art. Large 25.5 inch long classic kit with motorized propeller drive, automatically rotating main turrets &elevating guns and can be programmed for straight, figure eight or circle sailing patterns. Includes electric motor and hardware. One of the nice things about this model is that it all works very nicely. Never started. It has been inventoried complete with all parts and includes decals, color flag sheet and instructions. All the parts are still factory wrapped in the packing tissue and the very small parts are still factory sealed.
Lindberg Handley Page Victor, 1/94, 5312
Plastic Model Kit, Box Condition: Fair
Sold
Most likely an early 1970s issue. Loaded with Lindberg features including moving ailerons, elevator and rudder, four detailed turbojet engines, opening access panels in each wing, detailed main gear wells, rotating wheels, cockpit with pilot figures and the large, clear round based display stand. This kit has not been started. Inventoried 100% complete with all parts, decals and instructions present.
Lindberg XF-88 (F-88) VooDoo, 1/48, 5311
Plastic Model Kit, Box Condition: VG+
Sold
1988 issue and an ideal builder. Made from the same molds as the 1950s issue. Features movable flight controls, scale jet engines, opening inspection hatch, pilot figure and more. Never started. Inventoried 100% complete with all parts, decals and instructions present.