Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Minicraft Boeing 707-320B Intercontinental Pan Am - (707), 1/144, 14450

Plastic Model Kit,   Box Condition: VG+

Sold   

1999 issue from new molds at that time. Features all fine recessed panel lines, very nice intake and exhaust, optional position landing gear and extensive and colorful decals for the box art aircraft "Clipper Mercury." Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

AMT 1954 Chevrolet 4 Door Sedan Promo, 1/25

Plastic Model Kit,   Box Condition: VG+

Sold   

Rare. Original dealer promotional model in very nice condition. It is 100% complete. This is a one-owner model that has always been adult owned. It has the all-metal AMT chassis. The tires are factory new - it has never been played with and never exposed to smoke. The friction motor was removed. For this model, the body is 'excellent' and has little warping and good gloss The front and rear bumpers are metal. The clear is 'very good'. Some of the fine trim (door handles etc) has been painted to 'professional' quality; it is good enough to pass for factory paint.

Palmer 1964 Avanti Coupe 3 in 1 - Stock / Custom / Competition, 1/24, 6404

Plastic Model Kit,   Box Condition: Fair

Sold   

Simple, low piece count 1960s kit featuring parts for all three versions, molded in underside detail, full interior, rubber tires, metal axles and parts molded in ivory, clear and chrome plated plastic. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Hasegawa Mitsubishi G4M2E Type 1 Betty Model 24 Tei With MXY7 Ohka Model 11, 1/72, K2

Plastic Model Kit,   Box Condition: VG

Sold   

Hasegawa Japan-only issue with unique box art and beautiful, full color painting guide for four aircraft. Very well molded but older kit. Features Betty Bomber and Ohka with ground stand/parent aircraft mounting dolly. Has markings for 4 aircraft. Three are Ohka launchers. The fourth is one of two unique Betty's that flew to meet the Allies for surrender in 1945. These aircraft are white with large green crosses. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Bell Huey UH-1D Helicopter, 1/32, H286-200

Plastic Model Kit,   Box Condition: Sealed NM+

Sold   

Still factory sealed and in investment-grade 'Near Mint+' condition. Hard-to-find true first issue hardbox dated 1967. Early issue of the non-gunship Huey is a large, well detailed model featuring 18 inch rotor span, detailed Lycoming T53 Jet Engine with removable cowling, highly detailed interior and cockpit with opening cabin doors and moving rotors. Includes pilot and gunner figure.

Revell AH-1 Huey Cobra Vietnam Assault Helicopter, 1/32, 4442

Plastic Model Kit,   Box Condition: Good-

Sold   

1985 issue of this large-scale model. Well detailed for that time and features an 18 inch rotor span, full Lycoming T53 engine and removable cowl, complete interior, two pilots, moving gun turret and underwing stores. Never started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: there is a small chip out of the very top vertical stabilizer - the chip is present and fits back perfectly for an easy repair. One part (tail rotor pin) is a different shade of green; it is from an earlier issue of this same kit.

Revell US Coast Guard Icebreaker Eastwind - 'S' Issue, 1/285, H337-149

Plastic Model Kit,   Box Condition: VG+

Sold   

Original issue from 1956 with the classic boxart that has made these kits so famous. Like most of Revell's older ship models, it is well molded and detailed. Features rotating turrets/elevating guns, helicopter pad with helicopter and full rigging instructions. Molded in correct white, wood brown, and butterscotch. Never started. It has been inventoried complete with all parts and includes decals and instructions. The 269' U.S. Coast Guard Cutter Eastwind, a Polar Class Icebreaker was commissioned on June 3, 1944. This cutter served in the North Atlantic during World War II, and on ice breaking in the Arctic and Antarctic. She was decommissioned in 1968.

Tamiya Tiger I Sd.Kfz. 181 Ausf E, 1/35, MM156

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed. Very highly detailed armor model.

Tamiya Dragon Wagon 40 Ton US Tank Transporter, 1/35, MM230

Plastic Model Kit,   Box Condition: Sealed VG+

Sold   

Still factory sealed. Very highly detailed armor kit.

Peerless Bedford QL Gun Portee (AT Portee and Fire) 3 Ton 4x4 with 6lb Gun, 1/35, 3509

Plastic Model Kit,   Box Condition: Sealed VG++

Sold   

Still factory sealed. Highly detailed featuring very fine moldings, a full rolling chassis with engine, suspension and exhaust detail just like the real vehicle, fuel tanks, tool boxes, complete cab interior, driver, platform with fully detailed underside, topside, winch, ammunition boxes and accessories, optional up or down windshield and tarp top, 6lb Gun and ramps.

Accurate Miniatures A-36 Apache Allison Powered Dive Bomber, 1/48, 3401

Plastic Model Kit,   Box Condition: Good

Sold   

Very well molded kit with over 60 parts, detailed cockpit and gear wells, weighted or unweighted tires, professional quality decals and well written instructions. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya Messerschmitt Me-262 A-2a With Kettenkraftrad, 1/48, 61082

Plastic Model Kit,   Box Condition: VG++

Sold   

Very highly detailed and well molded. Includes tractor as shown on box art. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Microace USS Midway CV-41 Aircraft Carrier - Angled Deck Configuration - (ex Arii), 1/800, A128-2000

Plastic Model Kit,   Box Condition: Exc+

Sold   

From quality Arii molds. Nicely molded and detailed small-scale, full-hull model featuring numerous parts, full prop and rudders detail, optional position deck elevator, excellent island structure with full radar and sensor arrays, deck crane and tractors and a large airwing of F-4, E-2, S-3A, F/A-18, F-8, A-4, A-7, F-14, SH-60, Seaking, RA-5C and EA-6B aircraft and very nice decals which even include aircraft markings. With display stand. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Monogram Consolidated B-24D Liberator, 1/48, 5604

Plastic Model Kit,   Box Condition: Fair+

Sold   

1983 issue. Excellent kit featuring full interior, landing gear, gear well and bomb bay detailing, rotating props, turrets, wheels, pivoting nose wheel, bomb load, optional waist gun covers, optional position bomb doors, boarding ladder and crew of four. This kit has never been started. Inventoried with all plastic parts present and instructions. NOTE: missing the decals. Also, the box looks better than the grade but is rated as such because there is serious damage to the left short side in addition to the stain shown at the left side of the photo.

Mania TWO B5N2 Kate Torpedo Bombers / THREE Ki-27 Nates / TWO Ki-15 Babs, 1/72, CA-4001

Plastic Model Kit,   Box Condition: Exc

Sold   

SALE!! Includes all 7 kits in the boxes shown. NOTE: Sold AS-IS and not inventoried. This collector was very meticulous and of his kits that I did inventory, 95% are complete. But on these kits he cut the sprue (trees) with the part numbers still attached to each number, so the parts are loose. Because of that, I have not inventoried these kits. NOTE: on 5 of the kits, he built minor sub assemblies (cockpit tubs, wing halves, etc) to 'professional' quality. On two of the kits, he did 70 to 80% assembly to 'professional' quality. He also almost always removed the displays stands (if provided). Again, these kits are sold not inventoried and AS IS hence the very low price.

Testors Waco CG-4A Assault Glider or British Hadrian - USAAF Normandie Invasion 1944 / USAAF Sicilia 1943 / RAF, 1/72, 863

Plastic Model Kit,   Box Condition: Sealed Exc

Sold   

Still factory sealed. Well detailed and finely molded featuring complete cockpit and full interior including troop benches. The Waco CG-4 was designed and initially built by Waco Aircraft Company of Troy, OH. It first saw action in Sicily and the operation was termed a disaster. This likely had more to do with planning than the actual glider. Missions in Europe, including D-Day, went much better. The glider was even deployed to Burma. It could carry up to 13 troops, or a jeep and four men, or a 75mm Field Gun.

DMLDragon AAA TESTPhotos KIT 4, 1/100, 4562897

Wood Model Kit,   Box Condition: Sealed Exc

Sold   

Italeri #330 on top, lot of three

Monogram A-7 Corsair II - VA-72 USS Kennedy - White Box Issue, 1/48, 5418

Plastic Model Kit,   Box Condition: Good

Sold   

1979 issue of this quality kit featuring full cockpit, wheel well detail, optional position canopy and a large load of external stores with drop tanks, AIM-9 Sidewinders and iron bombs. Decals for VA-72 USS John F Kennedy. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. This kit has a very interesting history. Aurora originally cut the molds just a few years before they shut down. The A-7 was an excellent kit for that time as Aurora did everything they could to make it so. It features all recessed panel lines, realistic retractable landing gear with opening and closing doors, rotating wheels, good cockpit and a huge loadout of iron bombs, Sidewinder missiles and drop tanks. The molds were sold in 1977 to Monogram, and the A-7 molds survived the train accident on the way to Chicago. Monogram only reissued the finest Aurora kits; however, to meet Monogram standards, they often received significant upgrades, like the 737, DC-10 and 747 did. However, the A-7 upgrade was so extensive that it is a challenge to tell if it came from Aurora or not. For years I read that it did, but the differences are so significant that I wanted to compare them side-by-side. I finally got that chance. My conclusion is that this certainly is the old Aurora kit, but it has been modified so extensively that it may be the largest, most comprehensive mold rework ever done in the history of plastic modeling. First, it is from the Aurora molds because of the identical parts tree layout for the trees and parts that Monogram did keep - down to the millimeter, right down to the part number tabs. Also, the dimensions of the wings, horizontal stabs and most other major parts are identical along with many other smaller clues. But the amazing things are the changes. This is not a complete list, but Monogram did the following- on the fuselage halves they made the nose slightly longer (2MM) and wider; added the cockpit cowl, moved the front landing gear bay forward by 5mm, added the main wheel bays to the fuselage parts and removed all surface detail, replacing it with fine raised details. Antennas and lights were modified or added, as well as refueling probe storage. The wings were lengthened by 2mm each; while the recessed lower control surface lines were replace, the rest of the surface detail was redone complete. The horizontal stabilizers were reworked for surface detail and in doing so, they removed the reinforcement plates at the hinges; you can still see the tooling marks from this removal. The retractable landing gear was eliminated. The main gear struts were simply given strut detail, while the nose strut is almost completely new. The landing gear doors were almost left intact, but the tabs (for retraction) were removed and interior detail was added. The cockpit is completely new. The bomb loadout and ejector racks are almost the same, but the racks received new surface detail. The AIM-9s are almost completely Aurora - all Monogram did was remove the mounting tab. You can still see the original ejector pin marks, tree layout and even the same part number tab. There are many more changes, but this gives you a good idea of the trouble that Monogram went to in making accurate models.

Esoteric Hawker Nimrod I or II, 1/72

Vacuform Model Kit,   Box Condition: Sealed

Sold   

Esoteric was known for making perhaps the finest vacuform kits. Very well molded and highly detailed with metal parts - shaped struts and full instructions. Molds are equal to or of higher quality than most injection molded kits. The kit is still factory sealed.

Hasegawa Mitsubishi F1M2 Pete, 1/75, F-3

Plastic Model Kit,   Box Condition: VG+

Sold   

Very early Hasegawa rectangular logo - possibly the first issue. The box top is the high gloss type. NOTE: this kit has minor, 'professional' quality subassembly as follows: one wingtip float and the main float halves are assembled. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present.