Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Sterling Stearman PT-17 Kaydet - Control Line Wooden 32 Inch Wingspan Flying Model, C12-795

Wood Model Kit,   Box Condition: Good

Sold   

Big 32.25 inch wingspan kit for control line or RC conversion - .19 to .35 size engines. Features custom spun aluminum cowling, all die-cut and inter-notched plywood and balsa parts, pre-shaped and notched leading and trailing edges, maple motor mounts, wire landing gear, scale wheels, hardware pack, silkspan, big decal sheet and plans with instructions. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they were very complete and well made.

Sierra Consolidated PT-3 Primary Trainer, 1/72, 72-6

Vacuform Model Kit,   Box Condition: Good

Sold   

The PT-3 was the US Army Air Corps Primary trainer, replacing the PT-1 starting in 1928. Very finely molded. Includes metal prop and engine. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

IMC Chaparral 2E, 1/25, 116-200

Plastic Model Kit,   Box Condition: Good

Sold   

Rare. Good kit with nice detail. Features Chevy racing engine, removable rear engine deck, hinged opening doors, front wheels steer, operating airfoil, Firestone low profile racing tires and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

AMT Chevrolet 1964 Corvette Stingray With Trailer - Stock / Custom / Rally, 1/25, 6924-200

Plastic Model Kit,   Box Condition: Exc

Sold   

Can be built one of three ways. Features stock fuel injection or dual quad engine, detailed engine compartment, opening hood, complete interior, Rally insert board, fire extinguisher, clip board, roll bar, seat belts, racing helmet, custom wheel and gauges, stock or 'Shark' custom hood, custom 'GT' louvered rear window filler, stock luggage rack with bed roll and suitcase, full custom grill, side pipes and mufflers, hood scoop, complete trailer and more. Molded in white, clear, chrome plate, red-tinted clear and rubber tires. Includes white wall stickers. The kit has never been started. The 'stock' car and trailer have been inventoried with all parts present and instructions. NOTE: missing custom in-dash television panel and racing gas tank, as well as racing decals.

MPC 1956 1957 Chevrolet Corvette - Bud Anderson Master Kit -Built It One Of Eight Ways, 1/25, 301-200

Plastic Model Kit,   Box Condition: Good+

Sold   

Early 1960s issue that is well detailed - please note old MPC logo. Features all parts required to build stock '56 or '57, Modified Sports Drags, Bonneville Racer, Stock Drag, Rally Car, Road Racer or Custom. Includes one-piece body, detailed interior, underside with full front and rear suspension and driveline, full engine with numerous options, detailed engine compartment with opening hood, choice of hard top, soft top or boot and much, much more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Contrail Curtiss C-46 Commando - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Good+

Sold   

Dated 1975 and contains the production style fuselage along with all other parts. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

Monogram Speedee-Bilt Ercoupe, G4

Wood Model Kit,   Box Condition: Good

Sold   

Rare 'Speedee-Bilt' kit from the late 1940s. These were highly prefabricated flying model kits with beautiful, completely finished wings carved from one piece of thick balsa, die-cut, pre-painted balsa parts, colored tissue, plastic details and more. This model features a perfect 'Mono-Foil' factory finished wing, gray painted die-cut parts, gray covering tissue, gray plastic cowling, strip stock as required, rubber motor, die-cut clear canopy material, finished and painted wheels, fully formed wire landing gear, sandpaper, excellent decals, early small Monogram catalog, excellent brochure on how to balance and fly your model and full size plans with step-by-step instructions. The kit has never been started. The small parts are still in the wax paper bag. The other parts are unpunched. The kit is complete with all parts, decals and instructions. Please NOTE the box displays much better than the 'good' grade but is missing the end flaps on the right side.

Revell USS Constitution Old Ironsides, 1/192, H319-300

Plastic Model Kit,   Box Condition: VG+

Sold   

1956 'S' boxart but 1966 Authentikit Issue with blue-green background to the boxart, blue side panels and 300 price extension. That would make this kit approximately the 6th issue of this classic and highly detailed model. Never started. 100% inventoried complete with all parts/decals and instructions present.

Revell F8U-2N Crusader - Famous Aircraft Series - (F8U2N), 1/67, H167-129

Plastic Model Kit,   Box Condition: Good++

Sold   

1960 Revell of Canada reissue of the 'S' kit. This is the Famous Aircraft Series box, which is almost identical to the Famous Artist Series box (the name of the artist is removed for this version). Kit features folding wingtips and AIM-9 Sidewinder missiles. The kit has never been started. Inventoried 100% complete including decals and instructions. Includes usual English instructions and additional French sheet as well.

Hasegawa MS-406 'Finnish Air Force', 1/72, AP104

Plastic Model Kit,   Box Condition: Exc

Sold   

1994 special issue with Finnish markings. Very nicely molded. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Hasegawa Me-262B-1a U1 or Me-2621a, 1/72, 852

Plastic Model Kit,   Box Condition: Exc++++

Sold   

Very highly detailed and well molded with very fine recessed panel lines. Has parts and decals for nightfighter (Red 10, 10/NJG11) and trainer (White 35, EJG2). Never started. Sealed factory bag or inventoried 100% complete with all parts decals and instructions.

Toms Modelworks Pfalz D-3 (D-IIIa DIIIa), 1/48, 105

Multimedia Model Kit,   Box Condition: Exc

Sold   

Deluxe high quality kit. Contains very clean and detailed resin castings, numerous cast metal details, two photoetched sheets, Microscale decals and instructions. Complete and never started.

Fujimi North American F-86F Sabre - 25 FIS John Glenn 'Mig Mad Marine' / 335 FIS Capt. L.R. Moore 'Billie/Marge' / 39 FIS Lt. Jim Thompson 'The Huff' / 39 FIS 'Marlene Nancy and Marian', 1/72, F-19

Plastic Model Kit,   Box Condition: Exc

Sold   

This model dates from when Fujimi made the finest models in the world. Features excellent detail throughout, all very fine recessed panel lines, detailed cockpit, air inlet + compressor fans, gear wells and even the backs of the gear doors, optional position speed brakes and two piece canopy, decals for the four aircraft listed, and AIM-9B Sidewinders and drop tanks. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Maircraft Piper Cub - Solid Wood Model Airplane, 1/48, S-2

Wood Model Kit,   Box Condition: Exc

Sold   

Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps, fuselage that is about 80% cut, profile cut parts, printwood and a small bag of details. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.

Esoteric Hughes 500D / OH-6A - US Army Viet Nam / Finnish Air Force / Israeli Air Force / Japan SDF 1st Hikotai, 1/72, NAV-3

Resin Model Kit,   Box Condition: Exc-

Sold   

The best 1/72 Hughes 500 D kit ever made. Very highly detailed with excellent moldings. Features a beautiful resin body, fuselage bubble and windows in vacuform, complete interior, a large photoetched brass sheet and metal detail parts. Has full paint guide and decals for the four helicopters listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Ace Whitman Grumman F4F-3 Fighter - 15 Inch Wingspan Wooden Flying Model Kit- (F4F3), 3893

Wood Model Kit,   Box Condition: Good+

Sold   

1941 issue. The 'Ace Whitman' name was used by Joe Ott for some of his marketed kits. Joe Ott had a very popular line of wooden flying and non-flying kits in the Golden Age of flying models. The other 5 aircraft in this series are illustrated on the back of the box. This model comes with full size plans, very detailed assembly instructions (unusual for these types of kits), tissue, wood stock, printwood, block, pre-carved wheels and thrust bearing, rubber band, metal prop axle, colorful cut out insignia for markings, pilot, cockpit and engine and templates for motor cowl, front and side canopies, air intakes, tail wheel fairing and gear doors. Never started. NOTE: missing prop. Otherwise inventoried with all other parts, instructions and insignia.

AMT Accelerator Street Or Strip Vette - (Chevrolet Corvette), 1/25, T339-200

Plastic Model Kit,   Box Condition: Exc++

Sold   

Unusual kit from the 1970s in excellent condition. The box is great with light wear as the only flaw. Features blown drag or street engine with dual or single carbs, detailed engine compartment, opening hood, full interior with accessory fire extinguisher, clip board and safety helmet, T-Top roof (street version), racing windshield, roll bar and spoiler with custom front panel (drag) and a scale television camera with tripod, carriage casters, lens turret, carrying handles, flags, spotlight assemblies and more. Inside, the kit is in factory-new condition. It has never been started. The red/orange parts are still in the factory sealed bag. The clear and chrome parts were never factory sealed and are inventoried complete. The white accessory parts (camera) were also never sealed and are complete. With rubber tires, instructions and decals. Please NOTE: missing the two big 'AC' decals (2.5" x 5.5").

Otaki F-102 Delta Dagger / F-111E / F-105D Thunderchief Thud / RA-5C Vigilante, 1/144

Plastic Model Kit,   Box Condition: VG

Sold   

Includes all for detailed, small scale kits. They have not been started. All parts are still in the factory sealed bag with decals and instructions. The instructions are on the back of the box.

Entex F-100D Supersabre, 1/144, 8461S-49

Plastic Model Kit,   Box Condition: Good+

Sold   

Nicely molded F-100 in small scale with clear canopy, fine raised panel lines, full landing gear, two large drop tanks and rockets. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya Chieftain Royal Army Medium Tank Motorized, 1/25, DT108

Plastic Model Kit,   Box Condition: Good+

Sold   

Rare big scale motorized kit. Early issue with excellent box art. Highly detailed and fully motorized with steel and brass gear box, big RE-28 Mabuchi motor, individual treads and much more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.