Plastic Model Kit, Box Condition: Exc
$29
1964 issue features Brian Knight's classic box art of the Buffalo departing from a Lexington-Class carrier in the 'as-launched' configuration. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: a few parts are a different color plastic. They are from an earlier issue of the same kit.
Plastic Model Kit, Box Condition: Sealed Exc++
$65
Still factory sealed. The glue has come off the folded cello on the right side but the seal is 100% complete. Unusual late 1950s hardbox issue that never even mentions the F-86 on the box art. Features amazing early dramatic Ray Gaedke box artwork. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Plastic Model Kit, Box Condition: VG
$39
1960s Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of their kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. In some cases, the specific car and owner is on the box. The model includes brilliant blue injection molded parts, clear parts, detailed chassis, complete engine, removable hood and full interior. Never started. Inventoried 100% complete with all parts and instructions.
Plastic Model Kit, Box Condition: Good
$42
From Airfix molds and dated 1984. Builds Power's famous U-2B or has parts and markings for C or D variants. There is no assembly but NOTE: the interior parts are hand-painted with one thin coat of interior yellow color. There is no other painting. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc++
$48
Still factory sealed. This well-detailed model includes parts to build any one of the three years. Also includes instructions on making the 'Deluxe' or the 'Super Deluxe' from each of the three years (chrome trim is the only difference). Features rolling chassis build-up a rolling chassis just like the actual car, full engine and engine compartment detail, opening hood, complete suspension, full steering linkage, muffler and exhaust, front seats that flip forward, opening doors, full interior, optional fender skirts and stone shields, optional bumper guards and radio antenna and rubber tires. Molded in colored plastic (usually black), chrome plate and clear.
Plastic Model Kit, Box Condition: Sealed Exc++
$29
Still factory sealed. The early 1970s 'Profile Series' by MPC used quality Airfix kits in completely new boxes that showed off the three different decals choices included with each model. This one includes markings for 347th Fighter Group, New Caledonia, detached from the 13th Air Force Guadalcanal 1943, 18th Fighter Group Philippines, 5th Air Force and 14th Fighter Group, Algeria 1942.
Plastic Model Kit, Box Condition: VG++
$48
Rare 1965 issue with great framable box artwork. The box has wonderful color and gloss and four solid corners. This is a rare issue that seldom surfaces. Inside is the original F-94 normally cited as 1/48 scale, but Lindberg has listed it as "15/64 to the foot scale" which is about 1/51. Features two pilots with seats, clear canopy, raised panel detail, full landing gear (can easily be built with gear in the retracted position also), 'rocket' nose, display stand and colorful decals. Molded in silver and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Plastic Model Kit, Box Condition: VG+
$125
Rare issue of the world record speed aircraft in the unique white ablative coating finish. Main injection molded parts with dozens of cast resin details. Never started. The parts are all still in the factory sealed bag and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$39
1970s issue from quality Airfix molds. Features detailed engine, opening hood, many chrome plated parts, detailed suspension and exhaust, full interior, clear windows, optional soft top and scale positionable figure. Also includes a full color racing scene backdrop with holders. Never started. All the parts that were factory sealed are still sealed; the parts that were not (clear and chrome) have been inventoried complete. With instructions and decals. The decals are flat and 100% intact but NOTE: they have typical and very fine age micro-cracking. Please read the two articles located on this website that explain how to save and reproduce old decals.
Plastic Model Kit, Box Condition: Good
$42
From the 1970s and hard-to-find. Features one piece body, excellent suspension and driveline detail, complete interior, display stand and full color racing background display with holders. Molded in white, clear and chrome plate. Never started. All the parts that were factory sealed are still sealed; the parts that were not (clear and chrome) have been inventoried complete. With instructions and decals.
Plastic Model Kit, Box Condition: Good
$29
Features all fine recessed panel lines, many photoetched metal details (some factory painted), mask set, very good cockpit detail and much more. There is a full color paint guide and decals for 4 different aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Fair
$125
Rare first issue of this kit dated 1960. Large and highly detailed, measuring 36 inches long when built. This kit is the standard that other large-scale plastic sailing ships models are measured by. Since this is the first issue, the model has the factory painted copper hull below the waterline. The model features highly detailed deck, deck houses, cargo holds and removable covers, masts, yards and booms, bilge pump, windlass, 20 crew figure, lifeboats with oars, life preservers, anchors and anchor chains. With draftline and transom decals, figurehead, finely detailed hull, preformed ratlines and molded deadeyes, pin rails and blocks, full standing rigging instructions and diagrams and thread & chain for rigging. Molded in three colors - black, ivory/white and dark swirl wood tan. Inside, there has never been any assembly but NOTE: the bulwarks and outer raised white hull trim have been airbrushed white on both hull halves. While the work is neat (very good+ to excellent), there is white overspray on the factory copper paint. There is no other painting. The parts have been inventoried 100% complete and includes decals, color flag sheet, standing and running rigging line, chain and all assembly and rigging instructions. NOTE: the part numbers are off from the instruction book; I believe that the parts are from a later issue. I have also included a set of copied instructions that lines up perfectly with all of the part numbers on the trees.
Plastic Model Kit, Box Condition: VG+
$36
Big scale, full hull kit that is well detailed and molded with 121 pieces. This kit represents the early Gato from about 1941. Never started. Some parts are still in the factory sealed bags; the parts that are not factory sealed have been inventoried complete. Includes decals and instructions.
Vacuform Model Kit, Box Condition: VG+
$18
Still factory sealed. Excellent vacuform kit with parts of better quality than many injection molded kits. Includes very fine cast metal details (propellers, wheels, gear struts), full decals for Norsk Air and assembly instructions.
Plastic Model Kit, Box Condition: Good+
$59
Rare limited production kit and the only injection molded P108 model made to date. Features excellent injection molded parts with all fine recessed panel lines, many resin details, detailed cockpit & crew stations and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Wood Model Kit, Box Condition: VG
$65
Large 30 inch wingspan wooden kit for scale rubber flying or conversion to electric RC. Includes over 200 high quality laser cut balsa wood, complete hardware, colorful tissue, clear canopy, contest rubber and plastic propellers, wheels, complete building instructions, full size plans and decals. Never started. The parts that were factory sealed are still in the internal factory sealed bags; the parts that were never factory sealed have been inventoried complete. Includes decals and plans.
Plastic Model Kit, Box Condition: VG+
$39
SALE!! Includes two kits in the one box shown. Both models are never started and inventoried 100% complete with all parts, decals and instructions present. The kits feature very fine recessed panel lines, a variety of optional parts for the four different versions, detailed cockpit and gear wells, optional position speed brakes and canopy and a wide load of under-wing weapons. With paint guide and decals for all four variants. NOTE: decals have light stains on the backing paper due to the original wax paper protective cover sheet.
Plastic Model Kit, Box Condition: Fair
$49
1998 issue that is known for it's superb mold quality and excellent accuracy. While the box is only 'fair', the kit inside is factory mint. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$32
NOTE: bagged kit, there is no box. The box is shown for reference only. 2004 issue from original 1960s molds. Large 1/72 scale model of Lt.(jg) John F. Kennedy's historical ship. Well detailed for that time and measures just over 13 inches long when assembled. Features 4 torpedo tubes, 2 twin .50 caliber machine guns, 20mm cannon, life raft, 4 crew figures, rudder & propeller detail and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG+
$36
Well detailed featuring full engine, complete cockpit, detailed body and frame, optional position doors, rotating main and tail rotors, gunship armament and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224