Pyro 1932 Chrysler La Baron Phaeton Imperial Chassis V-8, 1/32, C413-100
Plastic Model Kit, Box Condition: Good
$38
1966 Pyro issue from original molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. Features detailed chassis and suspension, spoked wheels, complete motor and interior and a removable hood. Molded in colored, clear and chrome plated plastic with rubber tires. This kit has never been started. Inventoried 100% complete with all parts and instructions present.
Revell German U-Boat Type VIIC /41 Atlantic Version - U292 1 U-Flottille Brest 1944 / U318 13 Flottille Narvik Norway 1945 / U998 5 Flottille Kiel 1943 / 1004 31 Flottille Hamburg 1944, 1/144, 05100
Plastic Model Kit, Box Condition: Exc
$34
2010 issue from completely new molds. This Revell of Germany kit is very highly detailed and finely molded with over 100 pieces and measures over 18 inches long when assembled. Includes painting guide and decals for the four U-Boats listed above. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Republic P-47D Thunderbolt - US 509th Fighter Squadron 'Look No Hands' At Airfield R-68 Straubling Germany 1945 / P-47D-30-RE French Air Force GC II/3 Campagne, 1/32, 04722
Plastic Model Kit, Box Condition: VG
$42
2002 issue of the classic, large-scale 1970s Revell model. Featuring full cockpit, opening canopy, pilot figure, complete engine with removable cowling doors, optional position landing gear, detailed gear wells, rotating propeller & wheels and more. Also includes a very large and extensive decal sheet for the two aircraft listed, as well as a paint guide. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Sterling Curtiss P-6E Hawk - 16 Inch Wingspan Flying Model Aircraft that Drops Bombs in Flight, A10
Wood Model Kit, Box Condition: Exc
$69
Excellent flying model from the early to mid 1960s that is designed for rubber free flight or control line. It includes an innovative system for dropping bombs in flight. Features stick and tissue construction, quality die-cut balsa parts, stripwood and spars, other wood stock as required, die-cut clear windshield, vacufrom plastic details including radiator scoop, engine cowling, pilot bust, wheels pants, exhaust ports & more, finished wire landing gear struts, finished main and tail wheels, rubber motor, plastic propeller, covering tissue and a big full color decal sheet. Includes excellent full size plans with detailed instructions. Never started. The small parts are still in the factory sealed bag; the parts that were never sealed have been inventoried complete. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling's offering to be 'deluxe' compared to other manufacturers.
Seaglen Rearwin Speedster (ex-Peerless) - 30 inch Wingspan Flying Balsa Airplane
Wood Model Kit, Box Condition: Exc
$48
Reissue of the 1930s Peerless large scale kit. Easily converted to electric RC, or free flight with rubber, gas or electric power. Kit are of high quality and include printwood, strip wood, nose block, propeller, rubber motor, light-weight wheels, thrust bearing, beautiful copies of the original full size plans, colored covering tissue and clear window material. The model has not been started. The small parts are still in the factory sealed bag and the larger parts have been inventoried complete with all parts and plans. Other kits listed by Seaglen include the Pacific Ace (30"), Fairchild 24 (30" ex-Megow), Lambert Monocoupe (30" ex-Megow) and Cessna C-34 (30" ex-Megow). Seaglen Model Co. was located in Plympton, Mass. They used the same box design as Golden Age Reproductions and I often wondered if they were related.
Tamiya M48A3 Patton, 1/35, 35120
Plastic Model Kit, Box Condition: Exc
$36
This excellent model is from high quality molds and includes two figures and many scale accessories. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya USS Enterprise CV-6 Aircraft Carrier, 1/700, 77514
Plastic Model Kit, Box Condition: Sealed NM
$38
Still factory sealed. 1/700 scale waterline kit that is very highly detailed and finely molded. CV-6 has a combat record unequaled in history of the US Navy and is considered the most Successful Warship in History. Her totals were as follows: 20 Battle Stars, 911 Aircraft Destroyed and 71 Ships Sunk. She took part in almost every major action of the Pacific war from 1941 to 1945. The fascinating history of this ship is told by Commander Edward P. Stafford, USN, in his legendary book "The Big E - The Story of the USS Enterprise."
Simprop Electronic CAP 231 EX - 35 Inch Wingspan R/C Semi-Scale Park Flyer, 0030-887-0
Multimedia Model Kit, Box Condition: VG
$74
**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This is a extremely light weight model for aerobatics in tight spaces. The kit is preassembled with complete accessories and designed for electric power. Features finished and factory yellow painted tough foam fuselage with vertical stab and rudder attached, completely finished (yellow top, blue underside) wing (with ailerons) and horizontal stab with elevator attached, blue plastic wheel pants, sturdy, prebent wire landing gear, wheels & tires, tail wheel and wire strut, cleanly die-cut light ply and balsa wood, vacuform canopy (in mint condition and still clear [not yellowed]), lightweight plastic, factory painted 'engine bulges' & spinner and more. Includes a step-by-step illustrated instruction booklet with text instructions in English and German. The kit has never been started and is exactly as it left the factory. The small parts are still factory sealed; the larger parts were never sealed and have been inventoried complete. Canopy is wrapped for shipping. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply.
Sterling Piper Cub - 20.5 Inch Stunt Control Line Flying Aircraft, S36
Wood Model Kit, Box Condition: Sealed Exc
$69
Still factory sealed and rare. Dates from the late 1960s. This kit is part of Sterling's Control Line Beginners Series. It features only 6 die cut parts, fully formed wheels, wire gear struts, full decals, flying instructions, detailed plans and more. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they had the action features and included everything needed to complete the model.
Tamiya M8 Howitzer Motor Carriage With Awaiting Orders Set Of Three Figures, 1/35, 35312
Plastic Model Kit, Box Condition: Exc+
$30
A very well molded and detailed kit. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya M10 Tank Destroyer Motorized, 1/35, 30042
Plastic Model Kit, Box Condition: Exc++
$65
Well detailed and molded kit that includes all hardware for motorizing an all-metal gear box & gears and all other motorizing hardware. Even includes the original factory-sealed Mabuchi electric motor. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Sanger Space Transporter - With HORUS Orbital Glider and CARGUS Payload Rocket, 1/288, 4804
Plastic Model Kit, Box Condition: Good
$100
Rare kit from 1991. Very nicely molded and detailed kit with optional position landing gear, detailed gear wells, orbital glider, Cargus payload rocket, clear windows and full decals. Never started and inventoried complete with all parts and includes decals and instructions.
Testors RAH-66 Comanche Helicopter, 1/72, 950
Plastic Model Kit, Box Condition: Exc+
$28
Dated 1996. The Comanche was a promising stealth design for a light armed scout helicopter. The first prototype was completed in May of 1995. Testing went well and the design was proven to have high stealth characteristics and an incredible payload. Immediately before full scale production, the project was canceled in favor of upgrading the current helicopter force and for UAVs. The model kit features 77 parts with recessed surface detail, excellent dual cockpit, rotating gun turret, main & tail rotors, optional closed or open weapons bay doors with missiles and more. Never started and inventoried complete with all parts and includes decals and instructions.
UPC Kawasaki Ki-45 Nick - (ex Marusan), 1/101, 7033-49
Plastic Model Kit, Box Condition: VG++
$22
1960s issue from Marusan molds and a very nicely molded small scale kit. Never started and inventoried complete with all parts and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
UPC English Electric BAC Lightning - (ex Marusan), 1/98, 7034-49
Plastic Model Kit, Box Condition: Good-
$16
1960s issue from the original Marusan molds. Well molded with very fine raised panel detail and features clear canopy, complete landing gear and doors, drop tank and two SkyFlash air-to-air missiles. Never started and inventoried complete with all parts and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
Trumpeter Wellington Mk. IC - With Eduard Bomb Bay PE Detail Set - No.149 Sq RAF September 1940 / No.301 Sq September 1942, 1/72, 01626
Plastic Model Kit, Box Condition: Good
$54
Includes a factory sealed Eduard 72473 Wellington Mk.I Bomb Bay Detail Set in PE metal; this is a very large set with many parts. The actual model is highly detailed and from all new molds. Features 192 pieces, recessed panel lines, excellent cockpit and full interior and inside 'basket weave' framing, detailed wheel wells, excellent bomb bay, optional position bay doors, separately molded ailerons and much more. With a paint guide and decals for two aircraft. NOTE: this kit has superbly executed 'professional' quality subassembly as follows: #1 small engine front to engine; (4) horizontal stabilizer halves; 11 interior panels to the inside of the fuselage halves; (2) wing support boxes to outer fuselage halves; (1) turret has 4 pcs assembled; cockpit and cabin assembled. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Trumpeter Soviet B-4 M1931 203mm Howitzer, 1/35, 02307
Plastic Model Kit, Box Condition: Exc
$29
From new molds and well detailed with numerous pieces, PE details, individual track links, working features and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Valom Polikarpov TIS, 1/72, 72003
Plastic Model Kit, Box Condition: Sealed NM
$26
Still factory sealed and a well detailed injection molded model kit. The side of the box says that it also contains photoetched and resin details, but I cannot confirm that since the box is still factory sealed.
Wilhelmshaven Convair CV-440 Metropolitan And V-2 Rocket With Zugwagen - Builds Version V-2 / A-4 / US-BUMPER - Card Stock Models Bagged, 1/50, 1503
Cardstock Paper Model Kit, Box Condition: Sealed
$45
Includes both highly detailed cardstock models. The CV-440 is a large 1/50 scale and is in printed in full color in an very impressive silver/aluminum and with full Lufthansa markings. Never stared and complete; includes instructions in German. The V-2 is model #1811, 1/50 scale, includes the Zugwagen and also parts to build one of the three versions listed in the title. Never used and complete; includes heavily illustrated assembly instructions in English.
UPC North American A3J-1 Vigilante (ex-Marusan), 1/129, 7038-49
Plastic Model Kit, Box Condition: VG+
$24
1960s issue from quality Marusan molds. Features full landing gear and clear canopy. When the nose probe is pulled, the canopy opens. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.