Model Airplanes for adults
From military aircraft to vintage civil planes, OMK offers a variety of the best plastic model airplanes. Renowned brands like Revell, Aurora, Airfix, Heller, Guillow and more provide high-quality materials and realistic details. For adults and experienced builders.
Solo Props Precision Cut Kits Precision Cut Kits Bronco Wood Parts 96 Inch Wingspan R/C Aircraft - With Canopy Sections / Cowl Set (2) / Front & Rear Fuselage Sections / Century Jet Retract Gear System / (2) Saito FA91S Engines (Right And Left Hand) / Plans / Instructions And More, BOX 1
Wood Model Kit, Box Condition: VG
$1599
Rare. Sold ONLY as a pair; this is the 1st of 2 boxes. Both boxes must be ordered to get the correct shipping. Just the Precision Cut Kits parts, retracts and engines retail for over $2550 to $2800 dollars and there is much more included. The lot includes the Precision Cut Kits Laserline 1/5 Scale OV-10A Bronco Wood Short Kit, Dan Palmer Full Size Plans, Precision Cut Assembly Manual, Precision Cut Kits Canopy Sections (vacuformed clear and in 'mint' condition), Precision Cut Kits Engine Cowl Set, Precision Cut Kits Front and Rear Fuselage Sections, the correct Century Jet 1/5 Scale Giant/Jumbo Retractable Gear System With Nose and Two Mains (for 35 to 50 pound aircraft weight) with all paperwork (in a separate manila folder), (2) Saito FA91S Engines Never Run (one right hand and one left hand rotation) with all paperwork (in a separate manila folder), (2) Du-Bro #686 Motor Mounts, Jet Troncis Air Brake Valve, Air Brake and/or Retract System Hardware with plumbing fittings, tubes and (2) Air Reservoirs (large and small sizes), E-Flite EFLA1060 60 Amp Pro Brushless ESC, J&B Standard Servo Access Panel Assembly, J&B Small Servo Access Panel Assembly and copies of several Rockwell OV-10 Bronco books and copies of original aircraft blueprints. All parts and paperwork are never used, mint condition and inventoried 100%. Solo Props/Precision Cut Kits is still in business. The Precision Cut Kits items alone retail for $1303.52. The retracts are between $500 and $650. The engines retail for $750 to $850 for the pair. This lot will be shipped in three insured and well packed boxes.
Solo Props Precision Cut Kits Precision Cut Kits Bronco Wood Parts 96 Inch Wingspan R/C Aircraft - With Canopy Sections / Cowl Set (2) / Front & Rear Fuselage Sections / Century Jet Retract Gear System / (2) Saito FA91S Engines (Right And Left Hand) / Plans / Instructions And More, BOX 2
Wood Model Kit, Box Condition: VG
$1
Rare. Sold ONLY as a pair; this is the 2nd of 2 boxes. Both boxes must be ordered to get the correct shipping. Just the Precision Cut Kits parts, retracts and engines retail for over $2550 to $2800 dollars and there is much more included. The lot includes the Precision Cut Kits Laserline 1/5 Scale OV-10A Bronco Wood Short Kit, Dan Palmer Full Size Plans, Precision Cut Assembly Manual, Precision Cut Kits Canopy Sections (vacuformed clear and in 'mint' condition), Precision Cut Kits Engine Cowl Set, Precision Cut Kits Front and Rear Fuselage Sections, the correct Century Jet 1/5 Scale Giant/Jumbo Retractable Gear System With Nose and Two Mains (for 35 to 50 pound aircraft weight) with all paperwork (in a separate manila folder), (2) Saito FA91S Engines Never Run (one right hand and one left hand rotation) with all paperwork (in a separate manila folder), (2) Du-Bro #686 Motor Mounts, Jet Troncis Air Brake Valve, Air Brake and/or Retract System Hardware with plumbing fittings, tubes and (2) Air Reservoirs (large and small sizes), E-Flite EFLA1060 60 Amp Pro Brushless ESC, J&B Standard Servo Access Panel Assembly, J&B Small Servo Access Panel Assembly and copies of several Rockwell OV-10 Bronco books and copies of original aircraft blueprints. All parts and paperwork are never used, mint condition and inventoried 100%. Solo Props/Precision Cut Kits is still in business. The Precision Cut Kits items alone retail for $1303.52. The retracts are between $500 and $650. The engines retail for $750 to $850 for the pair. This lot will be shipped in three insured and well packed boxes.
Maxjet SR-71 Blackbird R/C Aircraft - 46.5 Inches Long Kit Version, 78A71
Other Materials, Box Condition: VG
$159
NOS (New Old Stock) large-scale foam R/C Blackbird that is out of production. This is a good flier; stable both fast and slow and a high rate of climb. It has never been out of the box; all parts are still as they came exactly from the factory. I know this because I bought it brand-new and never touched it. This is an all-foam airframe that is completely factory decorated, ready to assemble. Includes factory-painted, removable canopy, landing gear, inlet cones and much more. Never started. Everything that was sealed at the factory is still in the factory sealed bags. The very few parts that were never factory sealed have been inventoried complete. The decals are already factory-applied and includes the instruction book. Please note that this is the kit - you will need to furnish your own electronics (servos, esc, etc.), battery, transmitter and motors/fans.
Nicesky XB-70 Valkyrie Bomber R/C Aircraft ARF - 51.25 Inches Long With Motor / Fan / ESC Foam Almost Ready To Fly
Other Materials, Box Condition: VG
$225
NOS (New Old Stock) large-scale ARF R/C B-70 that is out of production. This is a good flier; stable both fast and slow and a high rate of climb. It has never been out of the box; all parts are still as they came exactly from the factory. I know this because I bought it brand-new and never touched it. This is an all-foam airframe, almost ready to fly model that is completely decorated, ready to assemble and features installed servos, retractable landing gear (factory-installed), Cyclone Power Programmable Brushless ESC (electronic speed control), ducted fan assembly, Freewing Outrunner Brushless electric motor, special canard function, servo extensions wires, electrical connectors and fully illustrated & text instructions. This model is ready for your receiver, transmitter and battery (not included.) Never started. Everything was was factory sealed is still in the factory sealed bags. The very few parts that were never factory sealed have been inventoried complete. The decals are already factory-applied and includes the instruction book.
Revell Northrop F-89D Scorpion - 'S' True First Issue With Early One-Piece Stand Arm, 1/80, H221-89
Plastic Model Kit, Box Condition: NM+
$175
1955 true first issue 'S' hardbox in stunning, investment-grade 'Near Mint+' condition with the fantastic early artwork that has made these models so famous. This kit is the true first issue with the rare one-piece clear stand arm to the Revelving base. In practice, this arm was too brittle and weak and broke very easily. Revell was quick to replace it it and change the instructions accordingly. (The new arm had two clear plastic pieces and continued in production until about 1960). This kit also has the correct 1st issue instructions showing the one piece arm. Molded in the correct high gloss silver and clear. The kit has never been started. Inventoried 100% complete with all pieces present and includes decals and instructions. Instructions are in 'near mint' condition and the decals are perfectly flat, 100% intact and are 'excellent' with the typical age yellowing of the carrier film as the only flaw.
Zoukei-Mura Douglas A-1J Skyraider US Air Force Super Wing Series - With TopNotch Camouflage Mask Set, 1/32, 7
Plastic Model Kit, Box Condition: Exc+
$129
Includes a factory-sealed TopNotch #TNM32-M100 Camouflage mask Set for the 1/32 Skyraider A-1 in US Air Force colors. The actual model needs little introduction. Simply put, it is the most detailed Skyraider in this scale and you actually build the better part of the internal structure. Never started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including two huge decal sheets and instructions.
Tamiya DeHavilland Mosquito FB Mk.VI With Yahu Instrument Panel And Eduard Mask Set, 1/32, 60326
Plastic Model Kit, Box Condition: Exc
$189
Includes factory-sealed Yahu #YMA3210 Mosquito Mk.VI Instrument Panel Set and Eduard #JX184 Mask Set designed for this kit. The actual kit is not only the finest Mossie model ever made but one of the finest model kits period. Includes the Export Version only clear engine cowling parts and the Reference Manual. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Zoukei-Mura J2M3 Raiden Super Wing Series - With Metal Landing Gear Struts, 1/32, 5
Plastic Model Kit, Box Condition: Exc++
$110
Includes the Super Wing #SWS05-M01 Metal Strut set; never used and still in the factory sealed bag. The actual kit is the finest Raiden model to date. It features all fine recessed panel lines, detailed engine which is a kit to itself, a fantastic cockpit, opened or closed canopy, wings where you build much of the internal structure including fuel tanks, guns & ammunition (with removable covers), main spare, some of the ribs, wheel bays, separately molded rudder, elevators, ailerons, optional extended or retracted wing trailing edge landing flap and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hobby Craft USAAC Boeing P-26C Peashooter - 94th Pursuit Sq or 94th PS 1 PG, 1/48, HC1563
Plastic Model Kit, Box Condition: VG
$34
A well molded kit that features all recessed fine panel lines, detailed cockpit, optional position entry hatch, highly detailed engine, rigging diagram and decals for two aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hobby Craft De Havilland DHC-3 Otter - USAF Arctic Supply or RCAF 411 Sq. CRB Downsview, 1/72, HC1396
Plastic Model Kit, Box Condition: Good+
$48
Features all fine recessed panel lines, clear side and cockpit windows, good cockpit detail, floor for cargo/passenger compartment, optional skis or wheels and decals for both air forces. The kit has never been started. Internal factory sealed bag including decals and instructions.
Hobby Craft USAAC Boeing P-26 Peashooter, 1/48, HC1558
Plastic Model Kit, Box Condition: VG+
$32
Nicely molded and features all recessed fine panel lines, detailed cockpit, optional position entry hatch, highly detailed engine, rigging diagram and decals for two aircraft - 34th PS/17PG 1934 and 17PS/1PG 1934. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hawk Chrome Plated P-51D Mustang Fighter USAF - Canadian or Philippine Air Forces, 1/48, 208-200
Plastic Model Kit, Box Condition: Exc
$54
Hard-to-find 1962 hardbox release with Bill Campbell artwork. This kit is directly from the original owner and was purchased new by him on March 31, 1962. The box has great color and gloss, four solid corners, no tape or tags and no fading or tears. There is light general wear as shown. This kit is completely metal plated. The plating is very bright but only in 'above average condition'. That means that the plating is bright, not badly scratched or missing; but there is light general wear and (mainly) several dull spots where the clear varnish (that the factory put on to protect the plating) was a little too thick. Well detailed for that time with drop tanks, rocket launchers and optional position canopy. Includes decals for all three versions. Never started. Inventoried 100% complete with all parts, decals and instructions.
Hobby Craft Vought F7U-3/3M Cutlass - US Navy VC-3 or VX-4 - (F7U3 /3M), 1/48, HC1600
Plastic Model Kit, Box Condition: Good+
$69
Features all fine recessed panel lines, four separately molded leading edge wing slats, separately molded ailerons, two piece canopy, drop tanks and four Sparrow I Missiles. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hobby Craft F4U-2 Night Fighter Corsair - US Marines VMF(N)-532 'Line Rider' #211 Roi Island 1944 / Same Unit 'Black George' #205 1944, 1/48, HC1520
Plastic Model Kit, Box Condition: Exc
$22
Well molded F4U-2 Corsair with all fine recessed panel lines, detailed twin row engine, opened or closed cowl flaps, very good cockpit including side panel detail, two-piece optional position canopy, detailed main and even tail wheel wells, optional dropped or raised trailing edge wing flaps, radar pod and more. Include multi-view paint guide and decals for both aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hawk Ryan ST/PT-20 - US Army AF or Dutch, 1/48, 510-130
Plastic Model Kit, Box Condition: Good
$28
Dated 1965 and has great Tom Morgan boxart. This kit features parts to build land or float plane versions, a unique water base for the seaplane, finely molded parts with excellent fit and finish, two pilots, rotating propeller & wheels, dual clear windscreens and more. Includes decals for the US and Dutch Military versions. Hawk's instructions show photos of the civil ST version but they did not provide decals for those. Never started and inventoried complete with all parts and includes decals and instruction Never started and inventoried complete with all parts and includes decals and instructions.
Hawk Lockheed Constellation L-749 - One Piece 1948 Box Issue, 1/140, 702
Plastic Model Kit, Box Condition: Exc+
$175
Very rare and much more so in an 'Excellent+' condition box. This kit is from 1949, and even predates the Gowland & Gowland 'Highway Pioneers' that started the plastic model craze in the United States. This model is molded in the correct glossy medium gray with a unique early stand. The model was issued with instructions but did not come with decals. The instructions tell you that '...the plane is molded in the proper base color, and if you intend to paint your favorite air-line markings be sure to use good enamel (not lacquer). The kit has never been started. The contents are as they left the factory. They have been inventoried 100% complete with all parts and instructions present. Hawk was a producer of wooden kits (often with plastic & metal details) before and after WWII and was one of the handful of manufacturers to produce such kits (known as 'solids') in a consistent 1/48 scale. Hawk made aircraft, ship and train models in this fashion. The very first injection molded aircraft kits in the United States were made by Varney or Hawk in 1946, but they did not catch on quickly. Hawk was always an innovative and quality-driven company, and they took a gamble on injection molded kit well before they were popular. As early as 1946 they issued the 1/48 Curtiss R3C-1 with wheels. Like Varney's Fleet Sub and PT-17, they were shunned by hobby dealers. Hawk persisted with the 'Evolution of the Jet' gift set in 1948 and issued several kits - the Supermarine S6B, Gee-Bee, Howard Ike, Laird (all in acetate) and the F-84G and this Constellation (both in polystyrene). All were in the two-tone one-piece box like this Constellation model.
Hawk Lockheed T-33A Chrome Plated - USAF / Canada RCAF / West German Luftwaffe, 1/48, 207-200
Plastic Model Kit, Box Condition: Good
$45
Hard-to-find first chrome issue hardbox dated 1961. The entire kit is metal plated and features realistic bright and matt panel variations. Other than one front fuselage half, the plating is in 'excellent' condition; however, one of the front fuselage halves is only average and has typical wear. I have packed the parts so they will be protected in shipping. Features removable jet engine and engine stand, mechanic, cockpit, working canopy and more. Includes a large decal sheet for all three versions. Never started. Inventoried 100% complete with all parts, decals and instructions.
Hawk Travelaire Mystery Ship - (Travel-Air), 1/48, 640-50
Plastic Model Kit, Box Condition: Good-
$28
1964 hardbox issue with Bill Campbell artwork. This is a well detailed kit of the famous 1930s racing aircraft and features fine, recessed panel lines, nicely detailed engine, removable cowling, pilot figure, rigging diagrams and more. Molded in bright red and clear plastic. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. In 1929 at the National Air Races in Cleveland, the Wright Whirlwind powered Travel Air and the pilot Doug Davis beat the finest Army and Navy pilots to win the first presentation of the legendary Thompson Trophy. The ship was designed in such secrecy that it was known as the 'Mystery Ship.'
Maquette Handley Page Dart Herald - Channel Express Airlines or BIA British Island Airways - (ex Frog), 1/72, MQ-7221
Plastic Model Kit, Box Condition: Sealed Exc
$95
Still factory sealed. Hard-to-find and from original Frog molds. One of the very early British Prop-jet airliners, Heralds carried 56 passengers or 6.5 tons of freight at a range of 1000 miles and a cruising speed of 275 mph. This kit features separately molded rudder, ailerons and elevators, two position passenger and cargo doors, rotating propeller & wheels, seated and standing pilots and more. Includes two very colorful decal sheets and painting guide for both aircraft.
Karaya Martinsyde F.4 Buzzard - (F-4), 1/48, 48026
Resin Model Kit, Box Condition: Exc+
$44
Superb limited edition kit. Features main airframe parts in professional grade castings, numerous brass PE details, detailed cockpit and much more. Includes decals for two aircraft (MS-10 and MS-7). The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.