Plastic Model Kit, Box Condition: Good-
$225
Very rare first issue from the early 1950s. When Aurora moved to the West Hempstead plant, they planned a series of very large scale bombers. All kits released up to this time had been small. Aurora's instincts were correct, and the B-26, B-25 and B-29 were a big sales success. This box art was done by Jim Cox and was only used for about one year, making it very rare. The kit has never been started and is inventoried 100% complete with the original tissue paper, all parts, large clear stand, instructions and decals.
Resin Model Kit, Box Condition: VG
$18
Rare kit from Rick's Models purchased on October 31, 1980. This is a basic (low part count) resin model with metal details, designed for 'in flight' display only (no landing gear). Never started and inventoried complete. Please note that Rick's models were simple to build and were not furnished with instructions or decals. Unless you specify otherwise, it will be shipped in the original shipping box.
Plastic Model Kit, Box Condition: Exc
$450
From 1956 - the first and only issue of this rare holiday season gift set. Contains the A-4D Skyhawk and HRS-1 both with US Marine markings. The box has excellent color and gloss, four solid corners and no tape, price tags, torn or missing litho. There is light wear and the typical 'cross hatch' marks from the original ribbon that Revell shipped these kits with. Inside, the HRS-1 is molded in the correct dark blue plastic and the famous clear Revell base and correct Marines decals for this this issue. The A-4 is molded in the correct medium gray with the clear base and correct and colorful Marines markings for this kit. The instructions are correct also and show these unique decals on the models. The kits have never been started. Inventoried 100% complete with all parts, including decals and instructions in excellent condition.
Plastic Model Kit, Box Condition: VG
$18
Late 1970s/early 1980s kit that was highly favored in magazine reviews at that time. Nicely molded and features cockpit detail, wings that swing, detailed landing gear and gear wells, optional position landing gear and bottom fin and 'Apex' and 'Aphid' air-to-air missiles. Includes decals for both air forces. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Resin Model Kit, Box Condition: VG
$24
Beautifully cast high-definition resin fuselage with very fine recessed panel lines. Includes metal seat and vacuform canopy for S-5 and S-8 Versions. Converts the Italeri FW-190 to the S-5 or S-8. Does not include decals. Never started and complete.
Resin Model Kit, Box Condition: Good++
$28
Beautifully done conversion kit. Features a high definition resin cast '190 fuselage with all very fine recessed panel lines, crystal clear canopy, white metal details and required for the conversion and decals for V-13, 15 or 16. Designed for use with the Italeri kit. Never started and complete with all parts and decals.
Plastic Model Kit, Box Condition: Good++
$10
Completely injection molded kit, not vacuform. Nicely molded. The kit has never been started. Inventoried with all parts and instructions present. This is the first Focke-Wulf design that Kurt Tank was responsible for. Later he designed the famous and effective 190 series.
Plastic Model Kit, Box Condition: Exc
$110
1960 issue of the rare "Whip Fly" series. The box is in rare 'excellent' collector condition. Hardbox artwork for this series was the 'action' photos by Tom Kelly. The kit has never been started. Inventoried complete with all aircraft parts, decals, instructions, metal ring, plastic handle, square of clay, 12' of line and plastic streamers. Like many other ideas, the Whip-Fly series seemed like a good idea...at first. The shortcomings were quickly revealed as energetic youngsters began spinning heavily weighted, pointed nose plastic aircraft inside and outside at speeds up to 45 mph. The series was quickly discontinued.
Plastic Model Kit, Box Condition: Sealed VG++
$18
Still factory sealed. 1973 issue molded in red and clear. Had decals and paint guide for Red Arrow aircraft.
Plastic Model Kit, Box Condition: Good
$16
Nicely molded kit. Includes full underwing stores and decals for Czech and Soviet (USSR) Air Forces as well as a variety of aircraft numbers to code your model any way that you wish. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Vacuform Model Kit, Box Condition: Good
$6
Very finely molded conversion with recessed panel lines; better mold quality than many injection molded kits. In white and clear plastic with instructions/plans. Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit (not included; Airfix Yak-9 is recommended) to complete. Vac kits are only recommended for experienced modelers and some scratchbuilding may be required.
Vacuform Model Kit, Box Condition: VG
$65
Rare large scale Demon. Very close to 1/48; measures 15.5 inches long when assembled. Can be built as a flying model with retracted landing gear or a static model with extended landing gear. Features recessed panel line detail, vacuform main parts, injection molded details, clear canopy, catapult launcher and decals. The kit has never been started. Inventoried 100% complete including decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc-
$58
Still factory sealed. Dates from the early 1960s and very hard to find. The scale is approximate. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. There was even a cut away 727 in big 1/96 scale and an Airport Set with a Cessna 180 and Bell 47D Helicotoper. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.
Plastic Model Kit, Box Condition: VG
$55
Rare model kit from the early 1960s and nicely molded for that time. It is designed to be motorized with the Faller No. 1001 Miniature Electric Motor (not included, Faller sold it separately.) Features parts to built either version, cockpit with crew of two and rear machine gun, wing cannon, main centerline bomb load, small wing-mounted bombs and a large decal sheet for multiple aircraft. Molded in a stunning swirl green and butterscotch brown, gray, orange-yellow, red and with clear canopy & display stand. The kit has never been started. The small parts (with motorizing-specific parts) are still in the factory sealed bag. The parts that were never factory sealed have been inventoried complete, including decals and instructions. Even the Faller packing quality inspection slip is still present.
Plastic Model Kit, Box Condition: Sealed
$16
Still factory sealed. Limited edition injection kit. Features very nice moldings with fine recessed panel lines and full decals.
Plastic Model Kit, Box Condition: Good++
$24
Action-packed artwork shows a British fighter in a hot gun battle with the main Do-217, which is receiving major damage. Another Do-217 released its bomb load, while the starboard wing on another snaps away in flames as the crew hits the silk. Kit features movable elevators, rudders and ailerons, elevating gun and rotating turret, cockpit detail, four crew members and rotating wheels and props. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Good
$44
Large-scale big wingspan issue. High quality modern kit made in the finest tradition of the stick and tissue flyers. Features high quality printed balsa, strip wood, plastic propeller, rubber motor, clear windshield material, full sized plans, instructions, covering tissue and other accessories. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Easy Built was a Canadian manufacturer who made original designed and excellent reproductions of classic flying designs from the 1930 and 1940s.
Resin Model Kit, Box Condition: Exc
$64
Very highly detailed resin kit. Finely molded. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Good
$545
This is a factory-sealed case of 12 Hobby-XV-3 model kits from the 1950s. Hobby-Time shipped them to the address on the box, and I purchased them from the man at that address. The case has never been opened and is still securely sealed top and bottom with the factory tape. The box is in 'excellent' condition. The actual model kits (12 inside the case!) are the one and only issue of this amazing aircraft. This is a very nice kit for that time with fine raised panel lines, interior detail and molded in gloss silver and clear.
Plastic Model Kit, Box Condition: Exc
$16
From older but quality Fujimi molds and with box art by Scott Eidson. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.