Silver Streak Southern Pacific 30' Caboose - HO Craftsman Kit With Sprung Metal Trucks, HO, 929-110
Wood and Metal Model Kit, Box Condition: Good
Sold
This is a classic, high-quality model from the Craftsman Era of HO kits. Silver Streak was one of a number of manufacturers that created very realistic wood and metal kits during the 1940s and 1950s. This is, in my opinion, an exceptional kit. Includes wooden pre-scribed, cut and factory painted and lettered hardwood sides with precut windows, real cast metal sprung trucks, fully milled and cut wooden floor, roof, underframe and other details, cast metal window frames, car ends + doors and brake parts including levers, cast metal coupler pockets, ends with stairs, bolsters, smoke stack and more, metal ladders, grab irons, hand rails and brake linkage, scale chain, full size plans and instructions and more. The kit has never been started. All parts are still internal factory bag sealed and includes instructions.
Monogram A3J Vigilante - Four Star Issue, 1/76, PA53-98
Plastic Model Kit, Box Condition: Good+
Sold
First hardbox dated 1959. This is the early original design nuclear bomber version of the Vigilant. When you press a small button, the bomb ejects out the back between the two engines like in the real aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions, which are both in 'excellent++' condition.
Pyro Barbary Felucca Pirate Ship, 312-49
Plastic Model Kit, Box Condition: Fair++
Sold
Unusual small-scale kit of the feared Barbary Coast Felucca. Although written of as Pirates in Western History, they were considered properly commissioned men-of-war. This unique kit contains factory wooden masts, vacuform billowing sails, one-piece injection molded main hull, one piece deck with all fittings molded in place and a light tan display stand. Never started. Inventoried 100% complete with all parts and instructions present. Please note that the box displays better than the 'fair++' grade but is rated as such because there is a 2.8" long closed tear on the left short side (that extends up the left top corner of the box top as shown) and a litho tear on the upper long side.
Pyro Santa Maria - Columbus Flag Ship, C314-49
Plastic Model Kit, Box Condition: VG
Sold
Early hardbox issue with great box artwork. This small scale ship kit meaures 6 inches long when assembled. Includes one-piece full hull, one piece deck with all fittings molded into it, three wooden masts, vacuform billowing sails and a tan display stand (yes, it is a very, very simple kit). The kit has never been started. It has been inventoried complete with all parts and includes instructions.
Hasegawa F-4E Phantom II 30th Anniversary, 1/48, PT8
Plastic Model Kit, Box Condition: Good++
Sold
Hard to find limited edition features 134 pieces, detailed cockpits and ejector seats, two pilots, optional position canopies (or one piece canopy), detailed gear wells and speed brakes, boarding ladder and an excellent assortment of weapons and drop tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Fujimi McDonnell Douglas F-4E Phantom II - With Markings for Three USAF Aircraft, 1/48, FP-1-398
Plastic Model Kit, Box Condition: VG
Sold
Large-scale, well detailed older kit from quality Fujimi molds. Features very fine recessed and raised panel lines, good cockpit detail, four piece canopy, separately molded inboard and outboard wing flap, detailed gear wells and inner gear covers, boarding ladder, ground crew member, extensive weapons load including 600 and 370 gallon drop tanks, 750lb iron bombs, AIM-7 Sparrow missiles, decals for the three aircraft. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Comet Aeronca K Floatplane - 25 inch Wingspan Flying Balsa Airplane Model, 3208-98
Wood Model Kit, Box Condition: Sealed VG+
Sold
Still factory sealed but the seal has shrunk and drawn the box slightly concave as shown. 1970s reissue of the 1950s model features traditional wood/tissue construction, quality printwood sheets, pre-cut balsa stringers and spars, detailed full size plans, building instructions, hardware, clear material for windows, tissue and propeller. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
Artesania Latina Whaleboat from the Charles W. Morgan Whaler - Plank-on-Frame Wooden Boat Kit, 1/25, 20020
Wood and Metal Model Kit, Box Condition: VG+
Sold
Excellent large 1/25 scale model of one of the Morgan's boats. This is a superb kit and ideal as your first plank-on-frame boat. Features all hardwood construction, laser cut parts, wood strip stock as required, sail cloth, precarved wooden fittings, cast metal fittings, complete instructions and full size plans. The kit has never been started. The parts are still in the internal factory sealed bags and includes all paperwork.
Revell Boeing 727 Trans Brasil Airline - Lodela Issue, 1/144, H299
Plastic Model Kit, Box Condition: Sealed VG
Sold
Still factory sealed and very rare Kikoler / Revell of Brasil issue. This is Revell's excellent 51 piece 'short body' 727 kit with colorful Trans Brasil Decals. The landing gear can be assembled up or down as can the rear passenger loading ramp (Airstair Door).
Valom Twin Pioneer CC.Mk 1 RAF, 1/72, 72136
Plastic Model Kit, Box Condition: Exc
Sold
Well detailed featuring crisp injection molded parts with fine recessed panel lines, injection molded clear parts, photoetched details, very good cockpit, cabin floor and bulkheads and more. Includes a full color paint guide and decals for both aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Sword Lightning T.Mk.4, 1/48, SW48008
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Very high quality limited issue injection molded kit with all fine recessed panel lines, well detailed cockpit and much more.
Valom Twin Pioneer - Air Atlantique Or Empire Test Pilots School, 1/72, 72137
Plastic Model Kit, Box Condition: Exc+
Sold
Well detailed featuring crisp injection molded parts with fine recessed panel lines, injection molded clear parts, photoetched details, very good cockpit, cabin floor and bulkheads and more. Includes a full color paint guide and decals for both aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Airfix Avro Vulcan B Mk2 - 44 Sq XM607 / 9 Sq XH562 / 617 Sq XL321 - And Special Decals For XH558 Vulcan Display Flight, 1/72, 09002
Vaccuform Model Kit, Box Condition: Good
Sold
Special issue with additional decals and 108 parts. Vulcan was the most famous element of 'V Force,' the British strategic retaliation group consisting of Vulcan, Victor and Valiant bombers. Nicely detailed model includes optional parts for one of three different aircraft, detailed landing gear, optional Blue Steel missile, optional position boarding hatch and stairs and a decal and marking guide for the three aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.
Planet Models XFL-1 Airabonita - First Appearance Of Prototype - (US Navy XP-39 Airacobra), 1/72, 136
Resin Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Rare. Beautiful resin kit with all fine recessed panel lines, full interior, standard or optional pitch prop blades and full decals. The Bell FXL-1 Airabonita was one of three new spec Navy prototype fighters. It competed with the Grumman XF5F-1 and the Vought XF4U-1 Corsair. The Bell offering was made from an Army XP-39 fighter. There were engine and undercarriage problems during trials, as well as handling issues. Bell modified the aircraft (this model "late modification") in many ways, but it was still no match for the Corsair, which won the competition.
Sweet SH-3 S-61 Sea King - Los Angeles Sheriff / Argentine Navy 1982 / Same 1992 / Indian Navy 2005 - (Seaking), 1/144, 6
Plastic Model Kit, Box Condition: Sealed NM
Sold
Reboxed model. Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale and always include an incredible decal sheet for multiple aircraft. This model features two two different Sea King variants with all fine recessed surface detail. Includes a large and extensive decal sheet and big, full color, multi-view paint guide for the 4 different helicopters listed. Never started and inventoried complete with all parts and includes decals and instructions.
Sweet TWO Westland Sea King Mk41 / Mk48 / Mk50A - Belgian Air Force 40 Squadron / West German Navy MFG-5 / Australian Navy 817 Squadron - (Seaking), 1/144, 4
Plastic Model Kit, Box Condition: Sealed NM
Sold
SALE!! Includes two kits in the one box shown. Both of the models are never started and inventoried 100% complete with all parts, special decals and instructions present. Please note that this is a reboxed model. Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale and always include an incredible decal sheet for multiple aircraft. This model features two two different Westland Sea King variants (represented with several optional parts) and all fine recessed surface detail. Includes a large and extensive decal sheet and big, full color, multi-view paint guide for the 3 different helicopters listed.
Accurate Armour R.N. Bedford OYD 20mm AA - British Royal Navy WWII Base Defense Truck, 1/35, K147
Resin Model Kit, Box Condition: Sealed Exc
Sold
Very rare and still factory tape sealed. Made in Scotland by Accurate Armour and now out of production. This is a highly detailed model of high-definition cast resin, cast metal and photoetched parts.
Hubley Ford Model A Woody Station Wagon, 1/20, 4858
Metal and Plastic Model Kit, Box Condition: Good-
Sold
From the very early 1970s or late 1960s. One of a series of popular and desirable metal and plastic kits originally from Hubley. The metal castings are very well done and detailed. Features cast metal body, frame, hood, engine, suspension and more, many injection molded parts including wire wheels and interior seats. Includes real rubber tires. Features steering front wheels, full rolling chassis with engine, exhaust, suspension and driveline just like the real car, removable hood, complete interior, decals, wood-grain sides and more. The kit has never been started. The small metal parts are all still factory bag sealed. The plastic parts and the large metal parts have been inventoried complete including decals and instructions.
Craft Master Dray Wagon - Wagons of the Old West, 50115-350
Wood and Metal Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. Authentic, large-scale model from high quality, die-cut California Redwood, Ponderosa Pine and other materials as required. Measures 8.75 inches long and 5 inches high when assembled. This excellent series contained several other kits, all done to the same (unlisted) scale - Covered Wagon, Log Wagon, Jerky Wagon, Mule Team, Horse Team, Ox Team, Jail Wagon, Yellowstone Wagon, Buckboard Wagon, Sheepherders Wagon, Ore Wagon, Conestoga Wagon, Milk Wagon, Chuck Wagon, Delivery Wagon, Dray Wagon, Stage Coach and Water Wagon. There was also a very early Red Rover Fire Engine Wagon in the same scale.
Otaki AMX 30 - Motorized - (A.M.X.30), 1/48, OT4-22-600
Plastic Model Kit, Box Condition: Exc+
Sold
Nicely detailed scale kit with realistic track drive through an included Mabuchi FA-130 motor, metal gear box and nylon gears. Includes all required hardware. Never started. The parts are still in the internal factory sealed bags and includes instructions. Please note that Otaki did not furnish decals with this issue.