Wood and Metal Model Kit, Box Condition: Sealed Exc+
Still factory sealed. Excellent and complete plank-on-frame kit with die-cut parts and a full set of deck fittings.
Plastic Model Kit, Box Condition: Good-
1977 issue of this classic kit. The visual effect of the SAC 'Anti-Nuclear Flash White' is shown well in the box art. Has decals and paint guide to make this aircraft or the camouflage version. Contains 207 parts. Very nicely detailed. Features crew of three, detailed cockpit, elevating and traversing rear turret, opening and closing bomb bay doors, operating wing flaps, operating spoilers, optional position entry hatch and landing gear, and optional parts to display one nacelle open to show the jet engine. There is no assembly but NOTE: two pilot's yokes are neatly painted black. There is no other painting. Inventoried complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: Exc++
Very large 1/200 scale destroyer that is designed for water operation and intended for remote control. Very well detailed. Molded in dark gray, dark red (lower hull), black and brass plate. Also includes the following drive hardware: metal and nylon gear box for dual prop drive, props and drive shafts, switch, motor mount and other metal hardware. The RE-280 was not included by Nichimo. The kit has never been started. The parts are still in the internal factory sealed bags and includes excellent, large and extensive decal sheet and instructions.
Plastic Model Kit, Box Condition: NM
Ex-Olin molds dating from the mid 1950s. The box is in investment-grade 'near mint' condition with stunning, factory-fresh color and gloss, four solid corners, no repairs or fading, to tears, litho damage or price tags. The only tape is the factory sealing tape. Wonderful and well detailed kit for that time. The one-piece hull is about one foot long; R/C was never imagined for such small models back then, but it could be easily made radio control with modern technology. Molded in white and beautiful gloss mahogany. Never started. Inventoried with all parts, flags and instructions present. Instructions are included for powered operation; some hardware is included. However, the motor, battery box and wires were never included.
Plastic Model Kit, Box Condition: NM+
1956 'S' issue with the fantastic box art that these kits were famous for. This is one of the finest examples I have seen of this kit. The box is in investment-grade 'near mint+' with factory-fresh gloss and color, no fading, stains, price tags, split corners, litho damage, tears or repairs of any kind. The only flaws are very, very light wear which does not even show up in the photo. Instructions are near mint; decals are beautiful, flat and 'near mint' with only the slightest tint of yellow. Molded in silver and clear with the famous Revell 'Swivel Base Display Stand.' The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
Build the ultimate 1/32 Marseille '109F! Includes Eagle Strike # 32052 Marseille decals, Eduard PE Detail Set #32-070 with three big frets (for a G-6 but most parts apply), Moskit 32-03 109 F/G/K Exhaust, Aires #2139 "F" Wheelbays, Waldron #2832 Cockpit Ammo Counter, MDC CV32006 Resin and PE Cockpit Set With Instrument Decals and MC018 Resin Main Wheels. The actual airplane model is either still internally factory sealed or inventoried 100% complete with all parts, decals and instructions. Includes TWO Marseille figures. One unbuilt and unpainted, and one pro built and pro painted.
Plastic Model Kit, Box Condition: Good
Very rare in this condition - never started and 100% complete including all parts, AMT Body Putty, sandpaper, upholstery material, 'excellent' decals and whitewall stickers & instructions. First issue that is well detailed and molded in white clear, red-tint clear, chrome and with two types of rubber tires. Includes full underside and chassis detail, complete engine and engine compartment, opening hood, full interior and parts for the stock or highly customized version. Please NOTE: there is a tire burn on the radiator hose (minor), the back of the dash (minor) and one one stock wheel.
Wood Model Kit, Box Condition: Good
Includes rare metal fitting set B-18F. Very highly detailed, large-scale model measuring 50 inches long when assembled. Designed for remote control or impressive static display. Never started. Inventoried complete with all parts, decals and instructions/plans present. This kit came from a very particular collector and the contents were exactly as it left the factory until I inspect it. I have put them back exactly as the factory did.
Wood Model Kit, Box Condition: Good-
Very, very rare- contains traces of the element 'unobtainium.' There is no internet or known auction history of one of these kits changing hands. Purchased new by a US Navy officer in about 1961 in Tokyo, Japan. He equipped himself nicely for a future R/C hobby upon his return to the states, but never built this kit. Features a large (1160 mm) wingspan and is specifically designed for R/C flight on a .9 to 1.5 size gas engine. This was a deluxe and highly prefabricated kit for that time with very high quality wood parts, of which 90% or more are completely cut out with the part number stamped in ink on each one. Woods are hardwood, plywood and balsa. Many of the parts are still held together with the unique color-tinted clear tape from this era of Japanese modeling. Other cut and shaped parts are still sealed in a plastic bag with a 'Picnic' header. This kit has sheeted fuselage sides which are also completely cut out. There is a sealed bag of hardware, sealed balloon wheels, plenty of silkspan-style covering material, fully formed wire landing gear and of course a very large set of actual size plans that includes R/C equipment placement guides. The kit has never been started. Some parts are still in the factory sealed bags and others are still factory taped as they were at the factory. The loose parts have been inventoried all present. Includes plans.
Wood Model Kit, Box Condition: VG
Rare and desirable kit in never started and complete condition. "Designed for Beginners - Acclaimed by Experts," the Mini Mambo flies on half-A engines and was designed for single channel R/C. Features simple construction, precision-cut balsa wood sanded to micrometer tolerance, simple construction, shaped leading and trailing edges, die cut ribs, bulkheads and more, die-cut structural plywood parts, anti-warp elevator design, shaped cowl and cabin blocks, sheet balsa covered fuselage sides, formed wire landing gear, hardware and great full size plans with detailed building instructions printed on them. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Wood and Plastic Model Kit, Box Condition: Sealed Exc+
Still factory sealed and this is a complete kit with fittings. Features a beautiful one-piece ABS hull and superstructure, die-cut plywood parts, numerous other plastic parts, detailed step-by-step instructions in 6 languages including English and more. Also includes the following Floquil paints for this model - Coast Guard Red F632, Maritime Blue F642, Navy White #30 F620 and Haze Gray F-594. The paints are still sealed in their boxes that Model Expo placed them in at the time of shipping.
Wood and Metal Model Kit, Box Condition: Exc++
A superbly detailed, full scale plank-on-frame model. Features accurately die-cut plywood frames/bulkheads, deck and more, numerous other hardwood and plywood die-cut parts for the superstructure, etc., molded composite wood stern, limewood planking, complete set of metal and wood fittings, instructions, plans and more. Never started. The kit is exactly as it was shipped from the factory. The items that were bag sealed are still sealed. The ones that were never sealed have been inventoried complete.
Wood and Metal Model Kit, Box Condition: Exc+
Includes the rare Billing Boats #511 Fittings Set which is still factory sealed. The actual kit is superbly detailed, full-scale and has plank-on-frame construction. Features accurately die-cut plywood frames/bulkheads, and more, numerous other hardwood and plywood die-cut parts for the superstructure, etc., hardwood planking, plans and more. Never started. The kit is exactly as it was shipped from the factory. The items that were bag sealed are still sealed. The ones that were never sealed have been inventoried complete. This vessel was built in 1965 at the N.V. Scheepswerven in Millingen, Holland, and called named "Maasbank." In September 1977 she was renamed "Banckert". The Maasbank served for 12 years in the Western part of Holland.
Wood Model Kit, Box Condition: VG
Very rare, especially never started and complete. This is the smaller version of the famous Comet Zipper, the "A" variant made to run in the smaller Class "A" Category. Kit features traditional balsa wood and tissue construction, detailed full size plans, high quality printwood, die-cut plywood motor mounts, stripwood, metal motor mounts, a large wax bag of still factory-sealed hardware, full-size plans in very good condition and covering issue. The kit has not been started and the parts that were never factory sealed have been inventoried complete. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
Wood Model Kit, Box Condition: VG
Dated 1935. Very rare. This kit is almost never found and even less in this condition. includes the never-seen sealed tube of very colorful Comet Cement and a glass jar of Comet brand Banana Liquid. Comet made a total of three different Robin kits and this 'Giant Wingspan' version is by far the largest. Kit features traditional wood/tissue construction with quality balsa printwood sheet parts, stripwood and spars, fully formed wheels, spars and wood stock, wood blocks and dowels, beautiful machine cut 9" prop, a factory-sealed envelope of hardware, decals, two colors of tissue, an insignia sheet and detailed, full-size plans with building instructions. Never started an complete. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
Wood Model Kit, Box Condition: Good
The plans were signed by the world-famous stunt & speed pilot Betty Skelton on 9-23-51 in Rapid City South Dakota. The personal note and signature are big and beautiful. This is appropriate, since this Berkeley kit is a model of her exact aircraft! Also included is a news paper biographical article and photo of Skelton. The actual kit is large-scale and highly detailed. Originally designed for .19 to .33 gas powered control line, it can be converted to electric power. Features precision die cut parts in balsa and plywood, fully finished and slotted leading and trailing edges for both wings, all planking and sheeting material, a beautiful metal cowl and metal wheel pants, fully finished main and tail wheels, completely formed landing gear struts and brace, extensive hardware packet, covering tissue, three huge decal sheets with every red stripe and red area included, one small 'The Little Stinker' decal sheet and beautiful plans with instructions. Never started and complete. Berkeley is a very famous manufacturer of flying model kits from the Golden Age of flying aviation, about 1932-1954. Founded in 1933 by William Effinger, the company was quite progressive in producing quality kits - it was likely the Berkeley 'Buccaneer' was the first gas powered model in kit form. In the later 1930s, Effinger acquired the services of a very talented Henry Struck. Struck went on to design numerous award-winning kits under the Berkeley name. Berkeley weathered the post WWII recession and emerged as a major kit producer in the late 1940 and 1950s. These were great years for Berkeley and they produced some incredible and large kits. The company went bankrupt in about 1960 however. Fox engines (Duke Fox) bought the company and released the kits alongside his own FOX models and engines. This arrangement did not last, and in the early 1960s the Berkeley name disappeared from hobby shop shelves.
Wood Model Kit, Box Condition: VG+
From 1949. Rare and especially in this condition- never started and complete. 'Shadow' is a beautiful, stable gas powered free-flight design featuring die-cut balsa parts, sheet balsa fuselage sides, fully formed landing gear, finished wheels, hardware, 'Sky-Sail' red colored covering tissue, die-cut plywood firewall and wing supports, clear window material, decals and superb full size plans that also include text building and flying instructions.
Plastic Model Kit, Box Condition: Good
Large and nicely detailed kit of the long range flying boat. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Exc++
Craftsman style true-scale static or rubber/electric powered flying kit. David Diels kits are upper-end stick and tissue models that feature the highest quality materials. Kit includes a beautiful set of full-size plans, assembly instructions, metal hardware, strip wood, printwood, plastic prop, plastic canopy, full-color decals, color covering tissue and color/markings notes. The model has not been started. The small parts are still in the factory sealed bag. The larger parts have been inventoried complete with all paperwork present.
Plastic Model Kit, Box Condition: Good+
Very highly detailed and finely molded kit. Never started. All parts are still in the factory sealed bags. With decals and instructions.