Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

AMT 1928 Lincoln Gangbusters, 1/25, 38167

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. Highly detailed with over 170 parts. Features working steering, fully detailed rolling chassis, complete interior, 385 CID V-8 engine with removable hood, optional convertible top of folded boot and luggage rack.

Revell Douglas D-558-2 Skyrocket - (D5582), 1/54, H121

Plastic Model Kit,   Box Condition: Exc

Sold   

Lodela issue. Kit features optional position landing gear and cockpit hatch, boarding ladder and pilot in the boxart pose. Never started. Factory sealed internal bag with decals and instructions.

Revell Douglas AD-6 Skyraider (AH-1) Navy Attack Aircraft - 50 Years of Naval Aviation Issue, 1/40, H260-298

Plastic Model Kit,   Box Condition: Good-

Sold   

Rare 1960 issue of this original 'S' action kit. This edition is the '50 Years of Naval Aviation' issue and has the textured box with the framable John Steel box artwork. Wings fold, dive brakes operate, canopy slides to show full cockpit, landing gear retracts and cowling comes off to show fully detailed engine. Molded in the correct dark gloss blue and clear. Never started. Inventoried 100% complete with all parts, decals and instructions. The decals are intact but have a backing paper stain on one side. NOTE: Collectors trading cards (P6M and Carrier FDR) are included but the stamp not included.

Frog BOAC Comet 4 Jetliner, 1/96, 356P

Plastic Model Kit,   Box Condition: Exc+

Sold   

Rare. Classic 1950s Frog kit of the first commercial jet airliner. Very large 1/96 scale. The box is excellent with light wear and as-new color and gloss. All four corners are solid and there are no repairs. Nicely molded kit with all recessed pane lines and full landing gear that can be installed up or down. The kit is molded in gloss silver and clear with a large black Frog stand. Markings are for G-APDA. The large and extensive decal sheet is flat and in excellent condition - even the clear wax paper covering is intact. Instructions are excellent also. The stand parts are still wrapped in the factory tissue paper. The kit has never been started. Inventoried 100% complete including decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.

Revell Lockheed SR-71 Spy Plane 'Blackbird', 1/72, H212-225

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. 1969 issue. Has detailed radar, removable random and rotating wheels.

Monogram B-52 Stratofortress With Jet Sound - Vietnam Issue Factory Sealed, 1/72, PA215

Plastic Model Kit,   Box Condition: Sealed NM++

Sold   

Factory sealed kit in investment-grade condition. These models were designed with a major selling point - an internal parts display that could be seen by potential modelers at the store. The display showed major parts of the kit, glue and motor and called out numerous selling points. Then the factory shrink-wrapped these kits inside. Then box lid was installed and it was not shrink-wrapped again, so that the kit could be inspected at the point of sale. Outer cover is near mint; inner box is mint and sealed. Rare issue has Vietnam-style boxart on a high-gloss box. 2nd release of this kit and the last with 'Jet Sound'. At this point (1968), Monogram had ceased making 'Monoglue', but the B-52 presentation cardboard has a spot for glue and it was designed to be seen - so the factory put in a tube of 1968 Testors glue with rubber bands in the Monoglue spot. Contains 207 parts. Very nicely detailed. Features crew of three, detailed cockpit, elevating and traversing rear turret, opening and closing bomb bay doors, operating wing flaps, operating spoilers, optional position entry hatch and landing gear, and optional parts to display one nacelle open to show the jet engine.

Monogram Martin B-26 Marauder 'Flak-Bait', 1/48, 5501

Plastic Model Kit,   Box Condition: Sealed Good+

Sold   

Still factory sealed. 1978 first issue with the finest mold quality. Large 1/48 scale with "White Box" style boxart. Features excellent interior detail, crew members, rotating turrets with elevating guns, full wheel well detail, opened or closed bomb bay doors with bomb load, rotating props and rear boarding ladder.

Bandai Star Trek USS Enterprise Pre Painted with Light Kit, 1/850, 0116192

Plastic Model Kit,   Box Condition: Exc+

Sold   

Discontinued and hard to find. This is an amazing kit, please read carefully. All parts are precision and professionally painted at the factory. The 'Aztec' pattern is perfectly duplicated. All markings (example: NCC-1701) are all painted also. The paint job is flawless and stunning. There are a few detailed photos of the dozens and dozens of parts . The entire hull, saucer and warp engines are lit internally with the included lighting kit. The amazing part is that the model was designed from the ground up to be lit, so it has the following features: parts are molded in black plastic or have the inside surfaces painted so there is no light bleed through - there are numerous clear plastic light diffusers so the lighting is distributed evenly for a perfect effect. Where special effects are needed with lighting, such as the warp engines or navigational deflector, the pattern is molded into the clear piece and if needed, the clear is tinted blue, etc for the proper effect. The base holds the batteries. All parts are very carefully factory sealed so there are no scratches. The assembled model is 14 inches long. Never started. All parts are still sealed in the original factory sealed. Complete.

Dumas DH-2C Beaver 30 inch Wingspan Flying Balsa Model Airplane, 306

Wood Model Kit,   Box Condition: Exc++

Sold   

Very large scale wooden kit with 30 inch wingspan. Perfect for rubber power, free flight or radio control. Features hand-selected laser cut balsa, contest rubber and plastic prop, vacuformed details, color decals, full size plan, hardware, lightweight issue and full step by step instructions. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.

Hasegawa US Aircraft Weapons III Air-To-Air Missiles - AIM-9B Sidewinder/AIM-9J/AIM-7E Sparrow/AIM-4D Falcon/AIM-4G/AIM-9D/AIM-9L/AMRAAM/SUU-20/AIM-9E/AIM-54 Phoenix/GPU-5/A(GEPOD-30) and AIM-9 USAF USN Launch Rails, 1/72, 3

Plastic Model Kit,   Box Condition: Exc++

Sold   

1/72 scale Air to Air missiles. Includes 4 to 8 of each missile listed, extensive decals and 2 USAF AIM-9 launch rails and 2 USN AIM-9 launch rails. Never started. Sealed factory bag or inventoried 100% complete with all parts decals and instructions.

Hasegawa Grumman F-14A Tomcat Atlantic Fleet Squadrons, 1/72, K38

Plastic Model Kit,   Box Condition: Sealed Mint

Sold   

Still factory sealed. Very highly detailed kit with 191 parts.

Novo Fokker VII B-3M Southern Cross (Frog Molds), 1/72, F175

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. From ex-Frog molds. Very nicely molded and detailed like most Frog kits.

Revell F-102A Delta Dagger Large Scale Working Model, 1/48, H281-200

Plastic Model Kit,   Box Condition: Exc+++

Sold   

Hardbox is dated 1960. Unique large scale kit includes many operational features. Landing gear and flaps retract and extend when canopy is opened and closed. Removable detailed engine and movable control surfaces. Weapons bay opens to show AIM-4 Falcon missiles. Never started. 100% inventoried complete with all parts/decals and instructions present.

Airfix Coastal Defense Fort - with 48 German Infantry Soldiers, British Commandos and Accessories, 1/72, 06706

Plastic Model Kit,   Box Condition: VG++

Sold   

Nicely done kit contains large 1/72 scale fort, soldiers and accessory ladders (2) and small boat. The kit has not been started and is 100% complete. The fort is still factory sealed. There are 48 German figures and 40 pieces of British Commandos - four pieces are 2 ladders and a commando boat.

Kyosho Douglas DC-6 (C-118 Liftmaster) - 71 Inch Wingspan Flying Aircraft Model, 1/20

Multimedia Model Kit,   Box Condition: VG++

Sold   

Very rare. Giant 71 inch wingspan scale DC-6 designed for four .19 engines and control line flight. Can be converted to RC. Very good quality kit that is a very sturdy design intended to be sheeted complete with balsa - no tissue. Extensively pre-fabricated. Kit features completely die cut balsa ribs, plywood bulkheads and main spar, keel, nacelle inner structures, sprung metal landing gear with balloon wheels, four aluminum cowls, clear vacuform cockpit windshield, blue-tinted side window material, metal push rods, and a great deal of other wood parts and metal parts as needed. Includes two huge sheets of full size plans. The kit has not been started. The parts that were factory bag sealed are still sealed; the parts that were factory taped are still in tape. Inventoried complete with all parts and plans. Recommended only for highly experienced modelers. NOTE: I have listed the manufacture as Kyosho although neither the kit or plans list any manufacture.

Sterling Cirrus - 87 Inch Wingspan Wooden Flying Model Glider, E7

Wood Model Kit,   Box Condition: VG

Sold   

Very large flying glider kit that is designed to be used any one of six ways: radio control, tow line, slope soaring, thermal soaring, free flight (engine powered) and non-flying super detailed scale model. Features quality numbered, die-cut balsa wood sanded to micro-meter tolerances, clear vacuform canopy, pre-carved nose, authentic decals, step by step plans, detachable wing panels (for storage and transportation) and more. The kit has never been started. Inventoried 100% complete including decals and instructions.

Mercury Models Supermarine Spitfire Mk.II & Mk.V - East India Squadron - 23 Inch Wingspan Gas Powered Control Line Flying Model, 1/19

Wood Model Kit,   Box Condition: Good

Sold   

Rare early 1950s kit that is highly prefabricated. The kit is designed for 1.55 to 3.5cc engines and control line sport, combat or team racing. This is a rugged scale model designed for ease of assembly. Because of the solid wood system of prefabrication, there is no printwood, no bulkheads, ribs, stringers or tissue paper. This was a very expensive kit in it's time. Features pre-cut and carved solid balsa wings with correct airfoil, precut fuselage sides, rudder and elevator, pre-cut and carved fuselage top and bottom blocks as well as top and bottom cowling, a great many other precut parts, a blue, die-cut cardstock template sheet, clear window material, vacuformed canopy, metal hardware and pushrods as required, a very large sheet of full color decals for the colorful East India Squadron, full illustrated instructions, trimming and flying instructions and more. The kit has never been started. Inventoried 100% complete including decals and instructions. Mercury Models were distributed by E. Keil & Company.

Vintage Aircraft Ford Tri-Motor (Tri Motor) - 54 Inch Wingspan Flying RC Model, 1/17, V1

Wood Model Kit,   Box Condition: VG++

Sold   

Very rare large scale RC aircraft kit from 1967. Actual scale measures to 1/17.45. Features die cut ribs and other parts as required, numerous other pre-cut wooden parts, formed metal landing gear struts,, front window template and clear side windows, full color decals for Floyd Bennet's Antarctic Expedition aircraft, metal adhesive foil for a skin, detailed instructions, full size plans and more. The kit has never been started. Inventoried 100% complete with all parts, decals and paperwork.

Berkeley Minnow Cosmic Wind, 1/8

Wood Model Kit,   Box Condition: VG

Sold   

Very large scale (1/8) model of the famous racer. Wingspan measures 28 inches. "Can be completely built and ready to fly in less than two evenings...Completely Prefabricated". Originally designed as a gas powered model for control line, or can be converted to electric power and modern RC (radio control) gear. Kit features precision cut wood parts, full color decals, metal spinner and hardware, wheels, plastic cowl and wheel plants and more. The model has not been started. Inventoried 100% complete with all parts, decals and instructions. Berkeley is a very famous manufacturer of flying model kits from the Golden Age of flying aviation, about 1932-1954. Founded in 1933 by William Effinger, the company was quite progressive in producing quality kits - it was likely the Berkeley 'Buccaneer' was the first gas powered model in kit form. In the later 1930s, Effinger acquired the services of a very talented Henry Struck. Struck went on to design numerous award-winning kits under the Berkeley name. Berkeley weathered the post WWII recession and emerged as a major kit producer in the late 1940 and 1950s. These were great years for Berkeley and they produced some incredible and large kits. The company went bankrupt in about 1960 however. Fox engines (Duke Fox) bought the company and released the kits alongside his own FOX models and engines. This arrangement did not last, and in the early 1960s the Berkeley name disappeared from hobby shop shelves.

Revell Launch Tower Space Shuttle and Booster Rockets, 1/144, 4911

Plastic Model Kit,   Box Condition: Box Top Only

Sold   

The definitive large and highly detailed Space Shuttle and Launcher kit. Features detailed tower structure, fixed service structure with 12 work levels, lightning mast, movable access arms for the support systems, movable access arm with the 'White Room' for the crew, rotating hammerhead crane, retractable rotating service structure, payload changeout room, space shuttle, main center fuel tank, two solid rocket boosters, authentic decals and more. The kit has never been started. All parts are still in the internally sealed bags. Complete with decals and instructions. NOTE: the box bottom is missing. Only the box top is present. Top grades 'fair' due to split corners and tape. NOTE: Revell made the kit box much larger than necessary. If your country has smaller postal size restrictions (or just want to save money on shipping), I can put this model in a much smaller box and save significantly on shipping. When checking out, just write 'Remove From Box' in the comments and I will send you a new estimate.