Revell Lockheed L-1011 Tristar Eastern Airlines, 1/144, H124
Plastic Model Kit, Box Condition: VG
Sold
Nicely detailed 1/144 scale kit of the famous Tri-Jet is dated 1973. Nicely molded and detailed. This kit has never been started. Inventoried 100% complete with all parts, decals and instructions. NOTE: the decals have some light bug damage throughout the sheet. I would grade them a '7' out of '10' if '10' was a perfect sheet.
ID Models F-86D Sabre Dog Conversion (For Hasegawa 1/32 F-86F) - Bagged, 1/32
Vacuform Model Kit, Box Condition: VG
Sold
Rare 1/32 Sabre Dog conversion kit. Contains vacuformed parts and plans/instructions. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Vacuform kits are only recommended for people experienced with this type of kit. Previous experience and scratch building skills are required.
Falcon F4H-1 Phantom II Conversion Kit - Bagged, 1/48
Vacuform Model Kit, Box Condition: VG
Sold
Large (1/48 scale) conversion kit. Makes a F4H-1 from the Hasegawa F-4B/N. Very high quality moldings with very fine recessed panel lines. Molded in white and includes full conversion instructions. NOTE: missing F-106B and F-105D Conversions - only includes the F4H listed. F4H is complete and uncut.
Grip Cessna 172 with Floats, 1/72, 002-150
Plastic Model Kit, Box Condition: Good+
Sold
Very crisply molded. Features very fine recessed panel lines, complete cockpit and passenger interior and full color decals for N5414E including blue stripes for the fuselage and floats. This kit has not been started. The parts are still in the factory sealed bag with decals and instructions.
Pyro Golden Hind - The Ship of Sir Francis Drake, B365-75
Plastic Model Kit, Box Condition: Sealed Exc+++
Sold
Still factory sealed but the seal has splits. One in series of many small scale ship kits that Pyro made in the late 1950s/60s. Between 5 and 6 inches long when assembled. Well detailed for the size with fine molded detail, full hull, display stand and billowing sails.
Life-Like HMS Revenge (Ex-Pyro), 1/110, B263-125
Plastic Model Kit, Box Condition: VG
Sold
From the early 1970s and original Pyro molds. This kit is from the excellent intermediate size sailing ship series. Overall length is about 8 inches when assembled. An excellent kit for its day (the 1960s), it features full hull, intricate wood planking and texture, detailed decorative higher sold moldings, separately molded deck cannon/carriages, anchors, wall and more. Includes separate masts, ratlines and full billowing sails. Molded in wood brown and ivory. The kit has never been started. It has been inventoried complete with all parts and includes instructions. The Revenge was an Elizabethan Galleon launched in 1577. Revenge had 46 guns and was 92 feet long. She was part of Sir Francis Drake's fleet of 80 ships that defeated the Armada. In 1661 the Revenge was attacked by a fleet of 16 Spanish Galleons. She sank two and disabled two of her enemy before being forced to surrender. Three days later she was sunk in a storm while returning to Spain as a war prize.
Bandai D4Y2 Suisei Judy Bomber (ex-Kogure), 1/40, 8506-275
Plastic Model Kit, Box Condition: VG+
Sold
Rare large scale Judy from older, former Kogure molds. Includes good interior and engine detail. Molded in green, silver, black and with clear canopies. Kit features retracting landing gear, working air/dive brakes, moving ailerons, detailed interior, optional position canopy, bombs and drop tanks. Factory sealed bags with decals and instructions.
Revell Dick Landy's 1968 Dodge Charger, 1/25, 85-2573
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Nice kit with detailed chassis and engine, opening hood, full interior and more. Molded in colored plastic, clear, chrome plate and with rubber tires.
AMT 1967 Ford Mustang GT Fastback, 1/25, 31550
Plastic Model Kit, Box Condition: Exc
Sold
Very nice kit with detailed chassis and engine, opening hood, full interior and more. Molded in colored plastic, clear, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
AMT Chevrolet 1959 Corvette - Fuel Injection - Stock or Custom, 1/25, 6588
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. Features all parts needed for stock or custom versions, Fuel Injected 290 hp 283 CID engine, opening hood and detailed interior and chassis. Includes the following optional parts- 5 spoke Mag wheels, hood scoop, tonneau cover, side pipes, spotlights, side mirrors, aerodynamic headrests and more. Over 85 parts molded in color, clear, chrome and rubber.
Revell USS Pennsylvania Battleship, 1/720, H486
Plastic Model Kit, Box Condition: Exc+++
Sold
Softbox issue dated 1969. Builds waterline or full hull versions. Well detailed small scale model of the Arizona's sister ship. Never started. Factory sealed bag or inventoried 100% complete with all parts and instructions.
AMT Longnose Mustang Gas Rhonda With 45RPM Record, 1/25, T307-200
Plastic Model Kit, Box Condition: Good
Sold
Rare kit in this condition. Even includes the record 'Sounds of Drag Racing Part 2: Funny Cars! Featuring Gas Rhonda.' Record is in excellent condition. Well detailed kit with full blown motor, complete drag rail chassis with separately molded front and rear suspension, sway bar, front axle, tie rods, disc brakes and drive shaft, racing cockpit with roll bar, instruments, steering wheel and gear, pedals, shift lever and hand brake, tilt up body with body support and very extensive decals. Molded in white, red-tinted clear, chrome and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes excellent decals and instructions.
Fotocut World War I Aircraft Details - Spoke Wheels / Machine Guns / Windscreens / Cockpit Parts + More - Bagged, W1003
Metal Model Kit, Box Condition: Sealed Bagged
Sold
Still factory sealed. Beautifully photoetched parts 1/72 scale. Includes numerous axial and two-cross spoke wheels, complete machine gun kits, misc. cockpit details, windscreens and many more details. Enough for several models.
Squadron (2) Curtiss P-36 / P-40B Replacement Canopies, 1/72, 9115
Vacuform Model Kit, Box Condition: Sealed
Sold
Very well molded, crystal clear two canopy set in 1/72 scale. Never used and still sealed in the original Squadron ziplock bag. These clear and thin canopies are a superior upgrade to the thick canopies supplied with most kits.
Squadron (2) Bf-109 B/E Replacement Canopies, 1/72, 9106
Vacuform Model Kit, Box Condition: Sealed
Sold
Very well molded, crystal clear two canopy set in 1/72 scale. Never used and still sealed in the original Squadron ziplock bag. These clear and thin canopies are a superior upgrade to the thick canopies supplied with most kits.
Aeroclub WWII Bucket Seats and Control Sticks, 1/72, V053
Metal Model Kit, Box Condition: Sealed
Sold
Precision metal castings. Two bucket sets and two control columns. Much greater detail than injection molding. Never used and complete.
Blue Water Navy USS Enterprise CV6 Aircraft Carrier, 1/350, BN35054
Resin Model Kit, Box Condition: Exc
Sold
The only 1/350 scale kit of the legendary CV-6 USS Enterprise, the most successful ship in the history of the US Navy. Blue Water Navy states on the cover that they produced 'The Finest 1/350 Scale Resin Ship Kits On The Planet' and that was no idle boast. First of all, the masters were researched in depth and built to museum standards. In making the molds, the silicone was de-aired in a vacuum chamber; then the resin was pressure cast. This method makes for air-bubble-free parts with flawless detail. Scale fidelity and historical accuracy are top-rate throughout. This kit features a full hull or waterline version, a full length hanger deck that is loaded with detail, a very large number of photoetched parts including a full-length flight deck that is a masterpiece in itself. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including instructions. This kit must be shipped insured. If you do not know the history of this ship, please read the book 'The Big E.'
AMT Indy Drag Combo Chevy II Wagon / Chevy II Funny Car / Trailer - 3 in 1 Racing Team, 1/25, T357-300
Plastic Model Kit, Box Condition: VG+
Sold
Rare. Includes all three kits. The box is 'very good+' with nice colors, four solid corners, no tape or price tags and with general wear as the only flaw. Inside, the kit has never been started. The Chevy II Funny Car and it's associated paperwork is still in the factory sealed bag. The trailer, with it's paperwork, is still in the factory sealed bag. The Chevy II Wagon is not factory sealed but has not been started and is inventoried 100% complete with all parts and instructions. Funny Car and trailer are molded in white (+chrome and clear for Funny Car) and the wagon is molded in a very light tan, clear, chrome and with rubber tires. Decals are in 'very good++' condition. They are not curled, have no yellowing and a small chip missing from one stripe as the only flaw. Also included is the Chevrolet 'Youth in Action' brochure.
Revell Morane-Saulnier N - Great Britain Issue, 1/72, H644
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. 1960s two piece box issue.
MPC 1969 GTO Pontiac Bubble Top Open Sportster - With Parts For Stock Convertible / Blown Funny Car / Custom, 1/25, 1269-200
Plastic Model Kit, Box Condition: Sealed Exc+++
Sold
Still factory sealed. Rare first issue. Features 400 CID engine in stock or blown drag versions, detailed engine compartment, opening hood, stock hood or clear hood, molded chassis underside detail, full interior for stock or custom, choice of stock tire or racking slicks, stock or mag wheels, trailer hitch, racing air foil, trailer mirrors, custom clear bubble top, roll bar, parachute, front spoiler and more.