Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Airfix Great Western Atlantic Ocean Liner, 1/180, 1701-300

Plastic Model Kit,   Box Condition: Fair+

$109   

NOTE: builder kit only! Please read carefully. Large scale issue with fantastic Craftmaster artwork. The Great Western was the first ship specifically built for the Atlantic Ferry Service and was designed by I.K. Brunel (who designed the Great Eastern). When launched in 1837, she carried 120 first class, 20 second class, and beds could be set up for an additional 100 if needed. The crew was 60 men. The first crossing of the Atlantic Ocean was in April of 1838 and took just over 15 days. After crossing the Atlantic 64 times, she ran for 10 years between Southampton and the West Indies before being broken up in 1857. The kit has never been started. NOTE: missing a section and one part of the display stand. The actual ship is missing 1/2 of the smoke stack (a simple cylinder with raised lines and two straight pipes. The other half is there to use as a perfect guide) and part #192 aft mast cross tree. Inventoried with all other parts, sails, rat lines, flag sheet and instructions present. NOTE: the bowsprit is present, but the fore most end is broken off. Best replaced with a section of pulled sprue or stock round plastic stock.

Aurora Boeing 737 - United Airlines, 1/72, 359-249

Plastic Model Kit,   Box Condition: Exc

$165   

This rare 1/72 scale 737 hardbox is dated 1966 and features great Roy Grinnell art. Molded in white and clear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Model Airways Nieuport 28 1917 Skeleton Kit, 1/16, 1002

Plastic Model Kit,   Box Condition: Exc++

$255   

Amazing model from 2000 builds a skeletal Nieuport 28 with over 190 laser cut hardwood (basswood, birch and plywood) parts, over 200 Britannia metal, copper, aluminum, steel, brass and rubber parts, and over 50 Britannia metal castings for the Gnome-Rhone Type 9N rotary engine complete with all cylinders, distributor, spark plugs and crankcase. Details other than the engine (which is a kit to itself) include turnbuckles, guy wires, compression bar, pulleys, wire support brackets, struts, flight instruments, tires and much more. Includes three sheets of full size plans and very detailed instructions. Completed wingspan is 20 inches. Never started. All parts are still in the factory sealed bags and containers. Includes all plans and instructions. Please note that shipping insurance is required for this kit.

ITC SS France Ocean Liner - (Norway), 1/450, 3600-4-500

Plastic Model Kit,   Box Condition: VG++

$250   

Very rare. First and only issue from 1963; very shortly after this kit was issued, ITC discontinued all plastic kit production. This is a large 1/450 scale kit of the SS France, one of the most beautiful ocean liners of all time. Very good detail for the time. Features full hull that is 24.75 inches long, 124 parts, 2 winged funnels, 3 anchors, 4 propellers, 2 launches, 20 lifeboats, 2 whaleboats, detailed mast, kingposts and superstructure. Inside, the kit is like new. The kit is molded in black (hull), red (funnels and fittings) and ivory (promenade and superstructure) to minimize painting like in the ITC United States. Kit also includes a beautiful letter (with a color painting of the France on the letterhead) from Georges Croisile, the Commandant of the French Line, introducing the kit and welcoming you onboard the real France one day. The kit has never been started. Almost all parts are still sealed in the factory bags. The red parts are not sealed but have been inventoried complete. Decals, flag sheets and instructions are included.

KMT Dart and Little John Missiles, M12-98

Plastic Model Kit,   Box Condition: Good-

$285   

In the late 1950s KMT released several large scale missile kits, all of which are rare today. This one is the Little John in 1/20 scale and the Dart in 1/12 scale. The Dart measures 6 inches long when built. Other large scale missiles that are listed as released by KMT are the Talos, Nike Hercules, Nike Ajax, Honest John and large 22" Corporal. Never started. Factory sealed small parts bag and all non-sealed parts inventoried complete with decals and instructions. Instructions and decals are in excellent condition.

Aurora North American P-51D Mustang - With Aurora Glue, 1/48, 118-79

Plastic Model Kit,   Box Condition: Good++

$145   

Contains still sealed Aurora glue with the early 'Aurora Line' logo. The kit is the first issue from about 1956 with the Northern Lights logo. Has many working features: detailed engine with removable cowlings, full cockpit and retractable landing gear. Molded in gloss olive green and clear. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions.

Revell Lockheed F-94C Starfire Interceptor - With One Piece Stand Arm - Pre 'S' Kit, 1/56, H210-79

Plastic Model Kit,   Box Condition: VG++

$175   

1954 Pre-S issue. This is the rare second issue. The first issue was in the simple one-piece box and Revell quickly converted to this two-piece box as it was much more durable and a full-color lithographed 'slick' could be used. For the second issue, Revell added rivet and raised panel line detail as well as landing gear, a two piece box and H210-79 kit number. The famous 'Globe' clear stand was added, but this kit has the rare one piece stand arm and the instructions reflecting that. Revell quickly realized that the one-piece arm was not strong enough, and quickly modified it to the familiar three piece arm for the 3rd issue. The box is in very good++ condition with four solid corners, nice color and gloss and minimal wear with minor insect damage on the corners of one short side. The kit has never been started. Inventoried 100% complete including decals and instructions. Decals and instructions are in near mint condition. The original small parts 'krinkle' bag is present as well.

Revell The Thermopylae Clipper Ship - 3 Feet Long And With Billowing Sails, 1/70, 5622

Plastic Model Kit,   Box Condition: Good

$229   

1988 issue of the Cutty Sark's famous competitor with beautiful box artwork by Jim Griffiths. Highly detailed, big 1/96 scale kit that measures 36 inches long when assembled. Features all deck hardware, crew, full billowing vacuform sails and complete running and standing rigging instructions; can also be built without sails if you wish. Never started The small parts are all still in the factory sealed bags. The few parts that were never factory sealed (hull halves and crew) are inventoried complete. Includes assembly instructions, rat lines, full rigging instructions, billowing sails, decals, flag sheet, rigging lines and metal chain. Please note that the decals have bug damage to the backing paper only. The actual transfers are fine.

Hasegawa Kawanishi N1K2-J Shidenkai George, 1/72, 506

Plastic Model Kit,   Box Condition: Sealed NM

$22   

Still factory sealed. Inverted box art issue.

Hawk Hawaiian Catamaran - Twin Hull Sailing Yacht, 300

Plastic Model Kit,   Box Condition: VG+++

$295   

For the advanced collector. Very rare kit from 1956. The very large Hawk Hawaiian Catamaran was issued only once. The model is based on an actual Waikiki Beach sailing ship. The scale is not given, but the kit measures 16 inches long and about 20 inches tall when assembled. True scale model with excellent detail for that time. Features one piece catamaran hulls, twin rudders with left and right tillers and connecting bar, cabin, life preservers, stanchions, metal hand rails, full vacuform billowing sails, rigging blocks, full rigging instructions, rigging material and color decals. The hulls, life preservers and rudders are molded in gloss pink, the cabin and hull decking are gloss baby blue and the masts, blocks, cleats and numerous other parts are molded in a realistic swirl wood tan. The sails are still in mint condition thanks to the special packing from the Hawk factory. The kit has never been started. When you open it up, it is exactly as it left the factory. All small parts and decals are still factory sealed in small bags. The cabin, two hulls and sails were never in factory bags but are complete and mint. All interior factory cardboard display pieces are intact and in excellent condition. The contents are still protected by the original factory tissue. The instructions are one large sheet and are in near mint condition. The box top has excellent color and gloss but has general wear as shown.

Revell Messerschmitt Bf-109G-10, 1/48, H33

Plastic Model Kit,   Box Condition: Sealed Exc++

$28   

Sale Pending
Email for availability.

Still factory sealed. 1978 1/48 scale issue. Features all recessed panel lines, full cockpit, rotating prop and drop tank. Decals for 'Yellow 6'.

Airfix Grumman TBM-3 Avenger - CV-10 USS Yorktown or CV-20 USS Bennington, 1/72, 297

Plastic Model Kit,   Box Condition: Good

$28   

Type three logo issue. Zeros press in close to score hits on a formation of TBFs as Avenger gunners score back. This is unusual as this same artwork was used later on both Craftmaster TBF issues; usually the Craftmaster artwork did not borrow from the T3s and was original to that series. Well molded kit. Features elevating gun, rotating turret, three crew members, moving ailerons, all correct clear windows, optional position landing gear, underwing rockets and decals for both aircraft. Never started. Inventoried 100% complete with all parts, decals and instructions. There is a very light stain on the lower right box top that did not show up in the photo, hence the 'Good' box grading.

Hasegawa Sopwith Camel (F.1 Camel) - 1/8 Scale Museum Model Series, 1/8, CP-02

Plastic Model Kit,   Box Condition: Good++

$1200   

Very rare and large 1/8 scale museum quality kit. The three 1/8 aircraft in this series are widely considered to be the finest model aircraft ever produced. This kit duplicates the classic Sopwith Camel using many of the original material in a near perfect representation of the inner structure of the aircraft. There are 1,198 parts made from die-cut plywood, Japanese cypress, cast soft metal, brass, aluminum, rubber, injection molded plastic and many other materials. The wingspan is 1067mm (42 inches) when assembled. The engineering of the kit is world-class right down to the assembly plans. Inside the kit has never been started. All parts are still sealed in the factory parts bags. Includes all plans, decals, instructions and paperwork. As an added precaution, I have carefully inventoried all small metal parts through the plastic bags as occasionally a bag will split open. They are confirmed to be 100% complete. Please note, this item must be shipped insured.

Hawk De Havilland Comet IV BOAC - with Interior and Ground Support, 1/153, 507-100

Plastic Model Kit,   Box Condition: Good

$105   

Rare. Great kit from 1958 with interior details and Bill Campbell artwork. The fuselage has a long flip-up panel to show the full passenger interior with all seats, bulkheads and even passengers. Also includes detailed landing gear, scale fuel truck, air conditioner truck and airport transport bus as well as full color BOAC decals for the aircraft and Mobilgas decals for the truck. This kit has never been started. Inventoried 100% complete with all parts, decals and instructions.

Revell 707 Flagship American Airlines 'S' Kit, 1/139, H246-98

Plastic Model Kit,   Box Condition: VG

$129   

Hard to find 'S' 1958 first release. The model represents the 707 in the initial configuration - Turbo-Jet (not fan) engines, and short, early rudder shape. Never started. Inventoried 100% complete with all parts, decals and instructions.

Revell Bendix Talos SAM-N-6 RIM-8 - US Navy Missile 'S' Issue, 1/40, H1808-79

Plastic Model Kit,   Box Condition: VG++

$250   

First and only issue of this rare kit. 1957 hardbox with fantastic artwork and the 'S' logo on the sides. Large scale kit that is well detailed. Forward fins move and launcher works. Includes three man crew. Never started. Inventoried 100% complete with all parts, decals and instructions present. NOTE: Box displays better than the 'VG++' grade, but was graded as such due to a very light 'Highland Hobby Shop' stamp on the box top.

Hasegawa Fokker DR.1 (DR-1) Triplane Museum Model - 1/8 Scale, 1/8, ZX3-69800

Plastic Model Kit,   Box Condition: VG++

$1200   

Very rare and large 1/8 scale museum quality kit. The three 1/8 aircraft in this series are widely considered to be the finest model aircraft ever produced. This kit duplicates the classic DR-1 using many of the original material in a near perfect representation of the inner structure of the aircraft. There are 857 parts made from die-cut plywood, Japanese cypress, cast soft metal, brass, aluminum, rubber, injection molded plastic and many other materials. The wingspan is 838mm (33 inches) when assembled. The engineering of the kit is world-class right down to the assembly plans. This kit has never been started. Inside, all the special internal boxes and inserts are included and in mint condition. Additionally, the vast majority of the parts are still in the factory sealed bags. The parts that were not sealed have been inventoried 100% complete. Includes all paperwork - illustrated parts list, instructions and three sets of roll-out plans. NOTE: plan set 'B' is in fair condition. It is complete but has wrinkles and some closed tears. Plans 'A' and 'C' are professionally printed copies of original Hasegawa plans from my collection. Please note, this item must be shipped insured.

Aurora Black Knight of Nurnberg 1580 - Crown Issue, 1/8, K3-98

Plastic Model Kit,   Box Condition: Exc++

$175   

In the mid 1950s, Crown Plastics advertised the release of a series of Knight models - some of the very first figure kits. However, before Crown entered production, Aurora marketed the line for Crown in 1956. The box side rectangular 'Northern Lights' Aurora logo has the 'Crown' logo incorporated into it, as does the logo on the instructions. The 'Crowns' were the first Aurora Knights ever issued, Aurora's very first figures kits, and Aurora gave them the kit numbers K1-98, K2-98 and K3-98. The knights sold well, and Aurora bought the three 'Knight' molds from Crown Plastics within the year. The kit is 100% correct down to the red and white plumes. Inside, the plastic parts are mint. The kit has never been started. The gloss black plastic parts are still sealed in the factory bag. The instructions are correct with the Crown logo in the Aurora logo. The two plumes are in very good condition, which is rare.

Monogram A-26B Invader Gun Nose Pro Modeler, 1/48, 5920

Plastic Model Kit,   Box Condition: Good

$119   

Sale Pending
Email for availability.

1995 first issue. Hard-to-find kit of the solid or 'gun nose' Invader in large 1/48 scale. Features full interior with all stations represented, optional position landing gear and bomb bay doors with detailed bay and weapons and more. The kit has never been started. Most parts are still in the internal factory sealed bags; one bag is open and I inventoried it complete. Includes decals and instructions. The decals are 100% intact but there is very light staining to the backing paper only at the upper right.

CM BB-36 USS Nevada - 1944 Operation Neptune Configuration, 1/350

Resin Model Kit,   Box Condition: Good

$375   

SPECIAL ORDER limited production kit with museum-quality high definition resin castings, photoetched details, decals and instructions. Full-hull kit represents the Nevada around the date of Operation Neptune. Complete kit with all parts needed for assembly. Kits are molded upon receipt of payment. Normal wait is four to six weeks.