Hasegawa Boeing 747 Pan Am - Clipper Flying Cloud or Clipper Carrier Dove (Cargo 747-200F), 1/200, 1170
Plastic Model Kit, Box Condition: Good+
Sold
Includes extensive decals for both aircraft. Features very fine recessed and raised panel lines and very good detail overall. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Revell Boeing E-3A Sentry AWACS - USAF Tinker AFB or NATO - Bagged, 1/144, 04364
Plastic Model Kit, Box Condition: Bagged
Sold
Has optional position landing gear and decals for the two aircraft listed. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Hasegawa McDonnell Douglas DC-10-30 SAS, 1/200, LC017-700
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed.
Airfix Republic F-84F Thunderstreak - West German or USAF, 1/72, 03022
Plastic Model Kit, Box Condition: Good++
Sold
From 1986. Features 65 parts, nicely detailed cockpit, optional position landing gear and speed brakes and an assortment of drop tanks and bombs for the loadout. Includes markings for both versions. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Academy P-38J P-38L F-5E Droopsnoot Lightning + Eduard PE + True Details Wheels + Quick Boost Guns, 1/48, 2215
Plastic Model Kit, Box Condition: NM
Sold
Model includes Eduard #FE265 Color PE Interior Details, True Details #48063 2 Main and 1 Nose Wheel Set (checkerboard tread) and Quickboost #QB48-361 P-38 Gun Barrels. The kit itself is very cleanly molded with excellent detail. Features all fine recessed panel lines, all required parts for all variants listed, detailed cockpit, optional position canopy and optional bombs, rocket launchers, rockets and drop tanks. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Pica T-28B R/C Stand-Off Scale - 65 inch Wingspan, 50201
Wood and Plastic Model Kit, Box Condition: VG++
Sold
Very large and highly detailed rc flying model kit for 4 to 6 channels. Very high quality kit. Features 65 inch wingspan and designed for rudder, elevator, aileron, flaps, throttle and retractable landing gear. Has many prefabricated components and a plastic cowl and canopy. Weight with retracts is 7.5 lbs. The kit has never been started and is 100% complete with all parts, plans, instructions and decals: NOTE: rear canopy is present but has cracked. You will need to secure an aftermarket one or vacuform your own. NOTE: this kit is factory packed in a very durable and strong box. It will be shipped without an external box unless you request otherwise.
Lindberg USS Olympia 1889 - Flagship of Admrial Dewey At Manila Bay (Ex-Pyro), 1/240, 716
Plastic Model Kit, Box Condition: Good
Sold
Larger scale full-hull kit from ex-Pyro molds. Never started. Inventoried complete with all parts and instructions.
Monogram Speedee-Bilt Boeing PT-13 Kaydet, G5-100
Wood Model Kit, Box Condition: Fair
Sold
The first trainer standardized for the Air Force and Navy. Pre-fabricated rubber-powered wooden scale flying model kit. Speedee-Bilt kits contained die cut and pre painted wooden parts, completely formed airfoil wings, carved wheels and plastic details such as pilot prop. Assembly is by detailed instructions. This kit has never been started. Inventoried with all parts and instructions but NOTE: missing decals. Before there were plastic models, there were wooden aircraft kits. These usually came in two types - solid and stick and tissue. The solid models were static and usually contained a few blocks of balsa and sometimes a detail part or two. These 'Make Wood Look Like Plane' models required a very high level of skill in carving and finishing. The stick and tissue variety were slightly easier to build and provided the ultimate thrill - they could fly when complete with rubber power (and later with free-flight gas and eventually RC). They still required a great deal of skill, so manufacturers sought ways to make model building more accessible to everyone. One idea was pre-carving and/or prefabrication. This raised prices, naturally. Many manufacturers launched lines of 'easy' to build flying models but only Monogram succeeded in making an entire line at an affordable price that would actual fly. The original 'Speedee-Bilt' kits were in one-piece two-color boxes. In the early 1950s, shortly before plastic kits were available, Monogram changed to the 'hardbox' with a lithographic slick glued to the top as this kit.
Monogram Speedee-Bilt Spad Pursuit - Flying Scale Model Airplane, G8
Wood Model Kit, Box Condition: Exc
Sold
First issue from the late 1940s or early 50s. For the advanced Monogram collector. Early completely pre-fabricated multi-media kit featuring pre-colored and die cut balsa wood, precarved balsa, finished Monofoil wing, plastic detail parts (such as cowl and prop) and rubber motor. Designed for rubber free flight or Co2 engine power. Never started. Inventoried 100% complete with all wood and plastic parts, decals and instructions/plans. Before there were plastic models, there were wooden aircraft kits. These usually came in two types - solid and stick and tissue. The solid models were static and usually contained a few blocks of balsa and sometimes a detail part or two. These "Make Wood Look Like Plane" models required a very high level of skill in carving and finishing. The stick and tissue variety were slightly easier to build and provided the ultimate thrill - they could fly when complete with rubber power (and later with free-flight gas and eventually RC). They still required a great deal of skill, so manufacturers sought ways to make model building more accessible to everyone. One idea was pre-carving and/or prefabrication. This raised prices, naturally. Many manufacturers launched lines of 'easy' to build flying models but only Monogram succeeded in making an entire line at an affordable price that would actual fly. The original "Speedee-Bilt" kits were in one-piece two-color boxes. In the early 1950s, shortly before plastic kits were available, Monogram changed to the 'hardbox' with a lithographic slick glued to the top. Speedee-Bilt kits contained die cut and pre painted wooden parts, completely formed airfoil wings, carved wheels and numerous plastic details like cowling, pilot, missiles, prop and whatever was required. Assembly was by detailed full size plans and instructions. Monogram carried the Speedee-Bilt line for several years past it's prime and the advent of plastic kits, a testimony to the quality and popularity.
Hasegawa Mitsubishi A6M2 Type 21 Zero Fighter - Carrier IJN Akagi (Shigeru Itaya) / Tainan AC (Saburo Sakai) / IJN Ryujo (Tadayoshi Koga), 1/72, A3
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Very well molded with fine rivet detail, cockpit, engine and rotating propeller. Has decals for the three aircraft listed which includes famous aces.
Revell Fairey Rotodyne - Cutaway Model with Full Interior, 1/78, H185-198
Plastic Model Kit, Box Condition: VG+++
Sold
Very rare. Unique and highly detailed model in near 1/72 scale of this vertical take-off and landing transport airplane. The first prototype flew in November 1957 and appeared at the Farnborough Air Show three years later. The Rotodyne could carry 60 civil passengers 0r 70 fully equipped troops as well as cargo. Cruising speed was 175 kts and maximum range was 610 nm. Kit features cut away design - a large fuselage panel can be removed to show off the complete interior with passenger seats, passengers, pilots, stewardess, baggage compartment (complete down to the suitcases), bathroom with toilet and cargo compartment including boxes, tire, carpet and barrel. Another panel comes off at the support for the rotor to reveal internal aircraft structure and the rotor power transmission. Also includes complete cockpit, working boarding door and stairs, working rear clam-shell cargo doors, operating rudder and elevators and rotating wheels, props and main rotor. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.
Airfix Boeing 727-100 TWA, 1/144, 03173-6
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Hard to find early -100 short 727. Includes colorful TWA decals. Features moving elevators, clear passenger and cockpit windows, optional position landing gear and airstair door.
Airfix DC-9-30 KLM, 1/144, 03176-5
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed but the seal has drawn the box concave. Hard to find -30 version of the venerable short-haul transport. Features optional position boarding and baggage doors, optional position landing gear, optional position rear airstair door, clear windows and KLM decals.
Revell Douglas DC-9 Swissair, 1/120, 4206
Plastic Model Kit, Box Condition: Exc
Sold
1982 Revell of Germany issue using the original issue molds from 1966. NOTE: this is not a stretch DC-9 as shown on the Revell box top; this is an original 'short' DC-9. Nicely molded kit includes optional position landing gear, movable wheels and very colorful and complete Swissair markings. The kit has never been started. Internal factory sealed bag including decals and instructions.
Monogram AC-47 'Spooky' Gunship Puff the Magic Dragon - Blue Box, 1/90, PA203-130
Plastic Model Kit, Box Condition: Good+
Sold
1967 issue, which I believe is the second issue of the Gunship version of this kit. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Revell Waco CG-4A Assult Glider or Hadrian - USAAF Sicily 1944 / USAAF Normandie 1944 / RAF Training Glider 1950, 1/72, H2012
Plastic Model Kit, Box Condition: Good-
Sold
1976 release that makes one of two USAAF Wacos or British version. Features positionable soldier figures, detailed cockpit, optional position loading doors, fully detailed cargo interior and more. The kit has never been started. Inventoried 100% complete including decals and instructions. Box is worn and stained but all parts are excellent, and the decals and paperwork are 'very good' to excellent.
Beechnut Curtis YP-37 - Bagged, 1/72, 1004
Plastic Model Kit, Box Condition: Sealed
Sold
Still factory sealed. Very limited production injection molded kit. Small details such as interior are not included in Beechnut kits but detailed drawings are provided. They contain all basic parts but you must scratch build the rest.
Monogram Apollo Spacecraft - Command/Service Cut Away with Interior, 1/32, 5083
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
Still factory sealed and from 1995. This kit features full interior detail for the CM and Service Module, clear panel on each to show the detail, three astronauts, rotating rocket nozzle, removable Command Module and more. Includes decals and detailed interior instrument placards.
Special Hobby Hawk H-75M / N / O - Argentina / Thailand / China, 1/72, 72051
Plastic Model Kit, Box Condition: Exc
Sold
Highly detailed with many resin and photoetched parts. Includes paint guide and decals for the three aircraft listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Focke-Wulf FW-200C Condor - with Airmodel Conversion C-6 / C-3 U2 / C-4 U1 / C-3 / C-3 U3 / C-4 U4 / C-1 / C-2, 1/72, H204-200
Plastic Model Kit, Box Condition: Good-
Sold
Includes Airmodel #106 FW-200 conversion kit consisting of one clear parts sheet and instructions. With the parts, you can make all of the variants listed in the title. Not used and complete with all parts and instructions. The actual kit is the first release in the hardbox dated 1965. Has many operating features: movable control surfaces, rotating props, moving wheels and gun turrets and full crew. Never started. Inventoried complete with all parts, decals and instructions.