Plastic Model Kit, Box Condition: Exc++
1957 original 'S' issue with the fantastic box art that has made these kits so famous and collectible. Molded in the correct gloss silver and with the clear Revell 'Globe' Swivel Display Stand. Nicely molded kit features optional position cargo door, refueling boom, optional position landing gear and a moving rudder. Never started. 100% inventoried complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: VG++
Rare. Over 18 inches long when assembled. Never started. All internal parts bags are still factory sealed. Complete with all decals and instructions.
Plastic Model Kit, Box Condition: Good+
1977 issue. Measures almost 16 inches long when assembled. Nicely done kit with finely engraved hull and one-piece deck with fittings, 35 billowing sails, one piece masts with separately molded yards, one piece rat lines, choice of simple or authentic riggings, display stand base, flag sheet, decals, tan and black rigging thread and more. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Vacuform sails are 'excellent.'
Plastic Model Kit, Box Condition: Sealed NM
Still factory sealed. Very highly detailed and well molded and includes figures.
Plastic Model Kit, Box Condition: Good++
1972 issue with revised molds ; a much better kit that previous issues. Includes pilot, ground crewman and battle terrain base. The kit has never been started. Inventoried 100% complete including decals and instructions. The aircraft represented fought with the Polish Air Force against the Ukranian forces in 1919.
Plastic Model Kit, Box Condition: Exc
2006 issue from the original excellent Marx molds, which were cut in late 1950s. Measures 30 inches long when built. This is Lindberg's R/C issue and it includes two electric motors, all necessary hardware, R/C and motor mounting plates...just about everything except batteries and a 2 Channel Radio. There is plenty of room in the vast hull for lighting, noise/speaker and any equipment or larger batteries you may wish to add. Molded in white, silver and clear with many brilliantly chromed parts. The molds were reportedly damaged in this run, which if true would prohibit a reissue. Never started. Almost all parts are still in the factory sealed bags. The few that were not have been inventoried complete, including decals and instructions.
Wood Model Kit, Box Condition: Sealed NM
Still factory sealed. Highly prefabricated and pre-decorated flying model with a 16.5 inch wingspan. Features all balsa construction (no tissue needed), quality die-cut balsa parts that are completely factory painted, plastic wheels and flying prop and thrust button, fully formed wire landing gear struts, full color insignia and very nicely illustrated building and flying instructions. KeilKraft was produced by the E. Keil & Company, Limited of Wickford, Essex Great Britain. Keil specialized in stick and tissue scale flying models and gliders. They made a few plastic kits as well.
Plastic Model Kit, Box Condition: Exc+
Includes TWO G-91 aircraft. Part of Tamiya's extensive and well detailed line of 1/100 aircraft. Each model includes decals for all four aircraft. The kits have never been started. Both models are still in the factory sealed bags and include decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG++
Still factory sealed. 1996 issue of the famous large 1/32 scale P-40E. Features detailed Allison engine, very good cockpit, retractable landing gear, movable wheels and prop, movable control surfaces, belly tank and pilot figure. Lt. Woods shot down a Betty and a Zero before going to Europe. There he downed 8 more aircraft and was awarded the Silver Star.
Resin Model Kit, Box Condition: Sealed VG++
SPECIAL ORDER limited production kit. Museum quality high definition resin castings. Complete kit with all parts needed for assembly. Some kits include photo-etched details and decals if required -email for details on a certain kit. Kits are molded upon receipt of payment. Normal wait is six to eight weeks.
Plastic Model Kit, Box Condition: Sealed Exc+
Still factory sealed. The ultimate issue of the fabulous Revell 1/16 Rolls-Royce is this 'Museum Classic' issue from 1979. Special items in this release include real brass stanchions, gold braided rope, real cloth material for the convertible top, real walnut dash and door trim as well as a walnut display easel. The kit itself is highly detailed and features real rubber tires, spoked wheels, steerable wheels, two position doors and trunk with drop-down tool tray, fully detailed chassis and suspension, two position hood, detailed engine with wiring and more.
Plastic Model Kit, Box Condition: Sealed Mint
Still factory sealed. 1984 issue. Molded in red, clear, chrome and rubber with many optional parts. Features opening hood, detailed hemi engine, complete interior, rear spoiler, hood scoop, custom graphics by Harry Bradley and more.
Plastic Model Kit, Box Condition: Sealed Exc
Still factory sealed but the seal has split. Rare Revell Lodela issue from original "S" kit molds with colorful Bonanza markings. Well detailed kit includes moving rudder, flaps and elevators, rotating wheels and props and loading ramp.
Wood Model Kit, Box Condition: VG++
Very popular flier that is long out of production. And rare in this condition - it came from the original owner who was a very discriminating collector. He opened it once for inspection then put it in climate controlled storage. Never started. All the parts that were factory sealed are still in factory sealed bags. All the parts that the factory put rubber bands around still have the factory rubber bands. With full size plans. It would be difficult to find a better example.
Plastic Model Kit, Box Condition: Good
Features detailed engine and engine compartment, opening hood, detailed underside, full interior and more. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc+
Original issue with the finest mold quality; not the common reproduction. Older 'T' part number issue with great artwork and price suffix on the part number. Features detailed engine and compartment, opening hood, numerous custom features, opening rear door and more. Molded in yellow, clear, chrome plate and with rubber tires. The kit has never been started. All the parts that were factory sealed (the vast majority) are still in factory sealed bags. The chrome, clear and tires are the only parts that were never factory sealed. They have been inventoried complete. Includes instructions and decals in excellent condition.
Plastic Model Kit, Box Condition: VG+
Rare large 1/48 scale kit of the JSDF trainer. Very nicely molded with all fine recessed panel line detail. Features detailed cockpit, crew of two, detailed intakes and exhaust, optional position landing gear and speed brakes, four piece canopy, a wide variety of load-outs including drop tanks, rocket pods, Anti-Ship missiles, Sidewinder and iron bombs, decals several T-2s and a full color painting guide. The kit has never been started. Internal factory sealed bag including decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG++
Still factory sealed but the seal has splits and has drawn the box top slightly concave. Very large (1/16 scale) model. The Continental was the rare "High Performance" version of the more common Phantom II line that was produced from 1929 to 1935. Very highly detailed kit with 165 parts. Features steerable front wheels, to position doors and boot, full interior, two position bonnet, complete RR 7.5 Liter (468 CID) overhead valve straight 6 and four speed transmission, and complete chassis and suspension. Molded in colored plastic, chrome, clear and with real rubber tires. NOTE: seal has some splits.
Wood Model Kit, Box Condition: NM
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Plastic Model Kit, Box Condition: Exc-
Late 1950s hardbox issue with incredible Ray Gaedke artwork. The box has excellent color and gloss and four solid corners; corner and edge wear are the main flaws. Large 1/48 scale F-100 with movable rudder, elevators and ailerons, detailed ejection seat and pilot, full jet engine detail with opening engine access hatch and a load-out of two drop tanks and 8 missiles. Includes colorful decals for the box art aircraft. The kit has never been started. Inventoried 100% complete including decals and instructions.