Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Faller Noratlas 2501 Motorized - Luftwaffe, 1/100, 1501

Plastic Model Kit,   Box Condition: Good

$55   

Rare kit from the 1960s designed for dual electric motor drive with the Faller no. 1001 Miniature Electric Motor (not furnished; Faller sold the motor separately). Nicely molded for the time featuring rotating propellers, positionable ailerons, rudders and elevator, optional position rear boarding door and forward crew boarding door, rear drive-on boarding ramp, clear side and cockpit windows and more. The kit has never been started. The small and motorizing specific parts are still in the internal factory sealed bag. The other parts were never sealed and have been inventoried complete including decals and instructions.

Faller F-4 Phantom II - Luftwaffe, 1/100, 1105

Plastic Model Kit,   Box Condition: VG+

$49   

Rare kit from the 1960s. Nicely molded for the time featuring good surface and inlet detail, optional position landing gear, crew and some cockpit detail, centerline drop tank, 12 gravity bombs and pylons, four AIM-7 Sparrow missiles and what appears to be two Bullpup AGM. Molded in light gray, dark gray and clear with the correct Faller clear stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Even includes the original Faller packing inspection slip.

Lincoln Boeing 707 BOAC, 1/190, 109

Plastic Model Kit,   Box Condition: Good

$45   

Nicely made small scale kit from the mid 1950s to the very early 1960s. Never started. The small parts are still in the internal factory sealed bag, and the larger parts that were never sealed have been inventoried complete including complete BOAC decals for the box art aircraft and instructions. Lincoln was based in Hong Kong. Plastic kits were not the primary business, but they established quite a line of them before discontinuing production in the late 1960s/early 1970s. Many molds moved to Kader, also in Hong Kong, who reissued the line. Many molds eventually found their way to the USA either through ATP (who purchased the excess kit stock when Kader sold out) or IM.

Lincoln Bristol Sycamore Helicopter, 1/64, 110

Plastic Model Kit,   Box Condition: Sealed Good++

$52   

Still factory sealed but the seal has shrunk and exposed the box ends. Nicely molded, larger scale model from the late 1950s or early 1960s. Lincoln was based in Hong Kong. Plastic kits were not the primary business, but they established quite a line of them before discontinuing production in the late 1960s/early 1970s. Many molds moved to Kader, also in Hong Kong, who reissued the line. Many molds eventually found their way to the USA either through ATP (who purchased the excess kit stock when Kader sold out) or IM.

LS Mitsubishi A6M5 Type 52 Zeke, 1/72, 6

Plastic Model Kit,   Box Condition: Good-

$26   

Very early LS kit dating from the start of the 1960s. Even at this early date, you can see why LS became legendary for quality. Features well molded parts with all fine recessed panel lines, decals for several aircraft, moving rudder, wing flaps and ailerons, choice of drop tank or bomb, sliding canopy, retracting landing gear and decals for a large number of aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Even the original glue is present. Please note, this box has closed tears and damage to the upper right. Some of the LS molds are still in use by Hasegawa as testament to the their detail and accuracy.

Lincoln Douglas DC-3 - Sabena, 1/96, 111

Plastic Model Kit,   Box Condition: Good+

$46   

Nicely made small scale kit with great box arts. Dates from the mid 1950s to the very early 1960s. Never started. The small parts are still in the internal factory sealed bag, and the larger parts that were never sealed have been inventoried complete including decals and instructions. Lincoln was based in Hong Kong. Plastic kits were not the primary business, but they established quite a line of them before discontinuing production in the late 1960s/early 1970s. Many molds moved to Kader, also in Hong Kong, who reissued the line. Many molds eventually found their way to the USA either through ATP (who purchased the excess kit stock when Kader sold out) or IM.

Monogram The Wolfman Luminators Glow In The Dark - (ex Aurora), 1/8, 1621

Plastic Model Kit,   Box Condition: Sealed NM

$48   

Still factory sealed. Great builder kit dated 1991 and made from the original Aurora molds. In 1977 Monogram purchased the Aurora molds and only reissued the best and most commercially viable models. This monster and others were issued in the early 1990s, probably after re-negotiating the license agreement with Universal (as hinted to on the box side). Molded in a stunning glow-in-the-dark plastic and also glows with a black light.

Monogram The Mummy Luminators Glow In The Dark - (ex Aurora), 1/8, 1622

Plastic Model Kit,   Box Condition: Sealed Exc

$39   

Still factory sealed. Great builder kit dated 1991 and made from the original Aurora molds. In 1977 Monogram purchased the Aurora molds and only reissued the best and most commercially viable models. This monster and others were issued in the early 1990s, probably after re-negotiating the license agreement with Universal (as hinted to on the box side). Molded in a stunning glow-in-the-dark plastic and also glows in a black light.

Airfix OV-10 Bronco - USAF or Marines, 1/72, 265

Plastic Model Kit,   Box Condition: Good-

$26   

1960s Type Three logo issue and a nice model featuring crew, drop tanks, AIM-9M Sidewinders, gun pods and bombs. Has decals for both versions. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Sanwa Grumman TBF-1 Avenger, 1/130, 1117

Plastic Model Kit,   Box Condition: Good

$42   

Dates from the early 1960s and very hard to find. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Inside, the model is factory new - all the parts and decals are still in the factory sealed clear bag. With instructions in 'excellent' condition. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.

Sanwa Ki-61 Hien Tony TEI-3, 1/89, 1120

Plastic Model Kit,   Box Condition: Good+

$45   

Dates from the early 1960s and very hard to find. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Inside, the model is factory new - all the parts and decals are still in the factory sealed clear bag. With instructions in 'excellent' condition. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.

Sanwa Curtiss SB2C-1 Helldiver, 1/116, 1116

Plastic Model Kit,   Box Condition: Good+

$45   

Dates from the early 1960s and very hard to find. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Inside, the model is factory new - all the parts and decals are still in the factory sealed clear bag. With instructions in 'excellent' condition. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.

Sanwa B-26D Invader Bomber - (A-26 / A/B-26), 1/110, 514

Plastic Model Kit,   Box Condition: Good+

$49   

Dates from the early 1960s and very hard to find. The scale is approximate. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Inside, the model is factory new - all the parts and decals are still in the factory sealed clear bag. With instructions in 'excellent' condition. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. There was even a cut away 727 in big 1/96 scale and an Airport Set with a Cessna 180 and Bell 47D Helicotoper. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.

Sanwa B-26D Invader Bomber - (A-26 / A/B-26), 1/110, 514

Plastic Model Kit,   Box Condition: Sealed Exc-

$58   

Still factory sealed. Dates from the early 1960s and very hard to find. The scale is approximate. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. There was even a cut away 727 in big 1/96 scale and an Airport Set with a Cessna 180 and Bell 47D Helicotoper. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.

Jasco Thermic 72 - 72 Inch Wingspan Glider

Wood Model Kit,   Box Condition: Fair

$115   

Very large flying glider for free flight or R/C Conversion. Most likely from the 1940s but I am not certain. High performance contest model features die-cut ribs with a 6409 airfoil, solid balsa pod and hard boom, shaped leading and trailing edges, easy pop up dethermalizer, precut spars and strip wood, covering tissue and more. The kit has never been started. It has been inventoried complete with all parts and includes plans/instructions.

SIG Pigeon and FF-14 Flip Gliders, FF-13

Wood Model Kit,   Box Condition: Sealed Exc

$30   

SALE!! Includes both quick-build gliders that are factory sealed. Features pre-shaped airfoil wing and one-evening building time.

Lindberg Grumman F11F-1 Blue Angels - (F11F1), 1/48, 541-98

Plastic Model Kit,   Box Condition: Exc

$75   

Classic 1950s hardbox kit with Ray Gaedke artwork. Rare first issue with 98 cent price extension and still the only early short nose F11F Tiger kit in 1/48 scale. Features fine raised panel details, movable ailerons, rudder and elevators and detailed engine with opening inspection panel. Never started. Inventoried 100% complete with all parts, decals and instructions.

Lindberg Douglas F4D-1 Skyray, 1/48, 523-98

Plastic Model Kit,   Box Condition: VG++

$52   

1950s issue with fantastic Ray Gaedke artwork. Kit features fine raised panel lines, moving rudder and wing control surfaces, complete jet engine and opening inspection cover, pilot, two drop tanks, under wing rockets and a clear display stand. Never started. Inventoried with all plastic parts, decals and instructions present but NOTE: missing metal stand rod (easily made from aluminum rod). Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg He-111 Bomber Cellovision, 1/63, 540-98

Plastic Model Kit,   Box Condition: Sealed Good+

$79   

Still factory sealed. Late 1950s Cellovision with Ray Gaedke artwork. Features clear back 'Cellovision' window, He-111 Trading Card, movable controls, retractable landing gear, removable cowling and scale engines, crew and engine ground stand.

Hobby-Time McDonnell F3H-1 Demon Shipboard Interceptor - (F3H1), 1/45, 2003

Vacuform Model Kit,   Box Condition: VG

$65   

Rare large scale Demon. Very close to 1/48; measures 15.5 inches long when assembled. Can be built as a flying model with retracted landing gear or a static model with extended landing gear. Features recessed panel line detail, vacuform main parts, injection molded details, clear canopy, catapult launcher and decals. The kit has never been started. Inventoried 100% complete including decals and instructions.