Plastic Model Kit, Box Condition: Good-
Very rare kit with a fascinating history. Around 1958/59, Orange Crush of Mexico offered a promotion. They offered free, colorful, plastic model cars if you collected correctly-marked Orange Crush bottle caps. The models are 1/32 scale Revell Highway Pioneer series - although there is no mention of Revell or Lodela anywhere on the box. Orange Crush had the boxes and even the instructions specially made for them with no mention of a manufacture. They were never given numbers. The boxes were very thin and fragile cardboard. This has contributed to wear and you must be very cautious with them. The kit has never been started. The parts are still in the internal factory sealed bag and the instructions are sealed in the bag as well. You could redeem your caps two ways - at the Orange Crush truck and at a Modelandia Hobby House. The box sides show the 18 cars in the series. Orange Crush also released two full-color booklets and a complete paint set for the cars. A colorful cardboard box held 7 colors of paint in glass bottles, complete with 'Orange Crush' screw-on caps! The entire promotion was done in coordination with Modelandia Hobby House which had up to 19 stores. Modelandia's name appears on each of the boxes and the paint as well. Robina S.A. was the bottler or distributor of Orange Crush in Mexico at that time. The box side lists the other 18 kits with small color pictures of each and shows three sizes of OC - Family Size (Familiar), Grand (Grande) and Normal. You could also obtain models with Titan bottle caps. Titan was also bottled by Robina and came in large (Titan) and smaller (Titancito) sizes and apparently more than one flavor. We do not know how Orange Crush had access to the plastic kits or who sealed the internal bags with the Crush instructions inside them. We can assume that it may have been Lodela, since they would have had access to the Revell molds. It is not know for how long the promotion lasted, but Orange Crush was one of the most dominant soft drinks in Mexico at that time. Here is one clue: some boxes claim that Modelandia had 13 locations; other boxes, which obviously came later on, claim 19 locations. This may indicate that this promotion went on for a significant amount of time.
Plastic Model Kit, Box Condition: Sealed Exc
Still factory sealed. The seal is 85% intact and has two splits and some cellophane missing on the bottom and side. Aurora Canada issue dated 1968. Features big 15 inch wingspan, clear cockpit windshield, detailed 18 wheel landing gear and a large display stand. Includes full color decals.
Plastic Model Kit, Box Condition: Sealed VG+
Still factory sealed. Well molded and dated 1980. Features complete cockpit, detailed main and tail wheel wells, optional position canopy and large weapons/drop tank loadout.
Plastic Model Kit, Box Condition: VG
Features swing wings, full external stores and optional position landing gear. Never started. Factory sealed bag with decals and instructions.
Plastic Model Kit, Box Condition: Sealed NM
Still factory sealed. One-piece Lodela issue, likely from the 1960s. This kit is from the 'S' molds but the molds were modified to add the AIM-7 Sparrow missiles and pylons.
Plastic Model Kit, Box Condition: VG+
Nicely molded kit with the parts molded in the colors shown on the box photograph so no painting is needed. Features clear windows, printed curtains, blinds and window treatments, separate doors, window frames/mullions, downspouts and base/foundation. The kit has never been started. Inventoried 100% complete including instructions.
Wood Model Kit, Box Condition: Fair-
1940s kit from hardwood, plywood, metal stock and with plastic treads. Features full size plans and instructions, track inner and outer frames, tread/track links, driver wheels, bogie wheels, spring and engine housings, smoke stack, seat and much more. The kit has not been started. Inventoried with all parts and plans with detailed text instructions.
Wood Model Kit, Box Condition: NM
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Metal Model Kit, Box Condition: Bagged
Very highly detailed all-metal casting makes an excellent upgrade to your model. Superior in detail to plastic injection molded engines. Never used and complete.
Plastic Model Kit, Box Condition: Sealed Exc+
Still factory sealed but the seal has split on the right box side. Dated 1989. First Soviet carrier aircraft with VTOL performance. Very nicely detailed and molded. Features all very fine recessed panel lines, cockpit and gear well detail, engine detail, two piece canopy, optional position turbine cover and full load of weapons including drop tanks, rocket pods, AS-7 Missiles and iron bombs.
Vacuform Model Kit, Box Condition: Exc
Contains both aircraft models. Older, very basic vacuform kit. Has white plastic main parts and includes cast resin engines, wheels and other parts. Never started. Complete with all parts and plans. Please note that all Cramer models are very basic kits. I do not recommend them unless you are highly experienced with older vacuform kits, have an extensive spares box and are an experienced scratch builder.
Wood Model Kit, Box Condition: VG
Rare. Dated 1943 and measures about 8 inches long when built. This is an excellent scale kit with novel construction that results in an almost completely finished model with very little painting. The frame and floor are both wood with die-cut heavy cardstock suspension springs. The seats are pre-carved wood. The body, hood, fenders, windshield, radiator, instrument panel and interior are from very heavy cardstock that is completely factory colored, lettered and it is also die-cut. The wheels are completely finished hardwood. Includes an unopened envelope of CASCO glue and full plans with instructions on them. Assembly is nicely illustrated by several diagrams. The kit has never been started. It has been inventoried complete with all parts and plans. NOTE: one wheel, the spare, has a slightly different hub shape. It is the correct diameter and thickness.
Plastic Model Kit, Box Condition: Exc
Very nicely molded kit. Features all fine recessed panel detail, cockpit detail, full landing gear, bombs and drop tank. Decals are for the Flying Tigers AVG as pictured on the box top. The model as never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions. KZS stood for Kovozavody Semily and they were located in Czechoslovakia.
Plastic Model Kit, Box Condition: Good
Nicely molded and detailed kit. Features all very fine recessed panel lines, complete cockpits, optional position canopy, detailed gear wells, optional large centerline drop tank, two optional wing pylons and decals for both air forces. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Vacuform Model Kit, Box Condition: Good
Basic vac kit with main airframe parts and clear canopy. Very crisp and well detailed moldings with recessed panel lines. Complete and never started. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Plastic Model Kit, Box Condition: Exc+++
Very well molded with fine rivet detail, cockpit, engine and rotating propeller. Has decals for the three aircraft listed. This kit has not been started. The parts are either still in the factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: Exc
1950s issue with excellent box art. The kit inside is a near-copy of the Highway Pioneers Model T. Premier intended to capitalize on the Gowland/Revell 1/32 classic car popularity; how well they did is unknown. The box art is definitely better than it's rival, but the kit is more basic. Molded in black with a metal wire frame windshield. The kit has never been started. Inventoried 100% complete including instructions.
Plastic Model Kit, Box Condition: Good+
From ex-Hasegawa molds. Features very good cockpit, wings that swing, two pilots, two piece canopy, AIM-54 Phoenix, AIM-7 Sparrow and AIM-9 Sidewinder missiles. Includes decals for both squadrons of 'Persian Gulf Fighters.' Never started. Factory sealed internal bag with all parts, decals and instructions.
Wood and Plastic Model Kit, Box Condition: Sealed Exc+
Still factory sealed. Very large flying model for free flight, .049 U-Control, static display or rubber power. Although it is not in the instructions, many people have converted this model to R/C with electric power. Includes stick and tissue construction, a large number of plastic vac parts, clear vac canopy, detailed cardstock parts, full decals and much more.
Plastic Model Kit, Box Condition: Exc
Rare kit from 1959. Features retractable landing gear, opening canopy and missiles that actually launch from the central pod. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. Adams was founded by Steve Adams and released plastic assembly kits in the late 1950s. The company was innovative and the general quality of most kits was very high for the time- so much that builders (not just collectors) still seek the kits today. Adams is best known today for a series of military vehicles and missiles, although they also released an aircraft (Draken), helicopter (YH-41), balloon (La Coquette) and ship (SS Savannah). Some of these appeared in gift sets as well. The Adams smaller scale (1/40) Atomic Cannon, Hawk Missile Battery, Honest John, Vanguard (1/80) and Thor (1/87)missiles and other kits are still sought after today. Combinations of these kits were issued in gift sets, which are very desirable collector's items today. In the late 1950s, Adams entered into a joint venture with Revell, and several of the military kits were released under the Revell label, such as the Jeep among others. Around 1960 there was a disagreement between Adams and Revell, and the agreement was terminated. Sometime after this, Adams quit the plastic model business, and Life-Like purchased most of the Adams molds.