Tamiya M-1 Abrams Tank with Mine Plow, 1/35, 35158
Plastic Model Kit, Box Condition: Exc
$33
Well molded and detailed. Features movable turret, elevating gun, optional position hatches, clear plastic for periscopes, commander figure and accurate M240 and M2 machine guns. The kit has never been started. Internal factory sealed bags including decals and instructions.
Aurora British SE-5 Scout - Without Parents Magazine Seal - Yellow Box Issue, 1/48, 103-79
Plastic Model Kit, Box Condition: NM
$72
Rare box art version and in amazing investment-grade 'Near Mint' condition with perfect color and gloss, four solid corners, no fading, tears, tags, tape or marks from either. Very light wear is the only flaw. Hardbox is dated 1960 and it appears that this design was only issued for a few years at the most. Molded in gloss olive drab and black. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions.
Hasegawa F-104G Starfighter Vikings - West German Navy Demonstration Team, 1/48, 09475
Plastic Model Kit, Box Condition: Sealed Exc
$42
Still factory sealed but the seal has split on the right side as shown. Rare 2003 special edition featuring 143 pieces, all recessed panel lines, detailed cockpit and gear wells and special markings for the Navy Flight Demonstration team.
PP Aeroparts RAF Nitrogen Trolley, 1/72, GA704
Multimedia Model Kit, Box Condition: Exc
$32
Very highly detailed multimedia kit. Includes three bags of perfectly cast metal parts, a fret of photoetched parts, wire, full decals and complete instructions. The kit has never been started. Internal factory sealed bags including decals and instructions.
Hudson Miniatures 1903 Rambler - Old Timers, 1/16
Wood Model Kit, Box Condition: Good
$48
Very well detailed large 1/16 kit from 1949. Features plastic wheels, lights, other accessories and wooden main parts and occasionally metal parts and cardstock. Although all of Hudson's 1/16 kits have excellent detail, this one has even more detail than usual thanks to Hudson's engineers having access to the actual car. The small parts are still factory bag sealed and the other parts have been inventoried complete with all parts, plans and instructions. Hudson Miniatures created a very popular line of automobile kits in a constant 1/16 scale shortly after WWII. The kits sold very well...so well that you could argue that Gowland & Gowland borrowed Hudson's subject matter for their ground-breaking 'Highway Pioneers.' The Hudson Miniatures 'Old Timers' even spawned a line of imitators, with Fador's 'Smallster' being one of the better in quality. Sales did drop on the appearance and popularity of the much smaller (and less accurate) Gowland/Revell 'Highway Pioneers' in 1951. When the all-injection molded Gowland kits proved not to be a passing fad, Hudson quickly planned and released his own all-plastic, small-scale competition called 'Lil' Old Timers Quickie Kits.' The kits were of excellent quality, but it was too little too late. Additionally, sales of the excellent wooden kits faltered further in the next few years with the introduction of accurate, 1/24 and 1/32 all-plastic cars in the mid 1950s. This forced Hudson to discontinue the wood kits and the plastic line was sold to Revell and subsequently re-released. Today, these excellent, big 1/16 kits are often the only model available of these early automobiles. In the mid 1960s Aurora thought so highly of Hudson Miniatures that they purchased the wood kit assets and released a very small number of these in all-plastic models.
Aurora Lockheed F-94C Starfire, 1/82, 495-50
Plastic Model Kit, Box Condition: VG
$42
Dated 1961. Dramatic Jo Kotula box art. The kit has never been started. Inventoried 100% complete including decals and instructions. The decals have some light damage affecting several of the transfers as they were once stuck to the instructions.
AMT 1957 Chrysler 300C Two Door Hardtop, 1/25, 30046
Plastic Model Kit, Box Condition: Exc+
$30
Highly detailed model features 392 V-8 engine, TorqueFlite Transmission, whitewall tires, detailed engine compartment, opening hood, deluxe wheel covers, detailed underside and complete interior. Molded in light gray, clear, red-tinted clear, chrome and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Execuform McDonnell F2H-3/4 Banshee - Bagged - (F2H3 F2H4), 1/72
Vacuform Model Kit, Box Condition: Sealed
$10
Still factory staple sealed. Basic vacuform kit. Never started. Complete with vacuform main parts, detailed plans, clear parts and instructions. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
ESCI Bell UH-1D Huey UN Rescue, 1/48, 4037
Plastic Model Kit, Box Condition: Exc
$38
Unusual civil issue with very good detail including full interior with cockpit and stretchers, opening doors, turbine engine and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hobby-Time McDonnell F3H-1 Demon Shipboard Interceptor - (F3H1), 1/45, 2003
Vacuform Model Kit, Box Condition: VG
$65
Rare large scale Demon. Very close to 1/48; measures 15.5 inches long when assembled. Can be built as a flying model with retracted landing gear or a static model with extended landing gear. Features recessed panel line detail, vacuform main parts, injection molded details, clear canopy, catapult launcher and decals. The kit has never been started. Inventoried 100% complete including decals and instructions.
California Model Co Nieuport 17C-1 - 19.75 Inch Wingspan Balsa Flying Aircraft - (Ni17 Nieuport 17), 1/16
Wood Model Kit, Box Condition: Good
$59
Probably from the late 1940s or early 1950s. Higher quality stick-and-tissue flying model to a constant 1/16 scale. Can be built for static scale display or flown with rubber, CO2 or small gas motors for power. Features quality balsa printwood and strip wood, factory-carved balsa propeller (needs final finishing), completely finished wheels and thrust button, hardware, stock wood and metal as required, blocks as needed, covering tissue and beautifully drawn full-size plans. The model has not been started. Inventoried complete with all parts and plans. Made by California Model Company out of Long Beach, CA USA. If you have more information on this manufacture, please email me. How far back they go is unknown; they claim to have the 'Know How of 30 Years Experience' on the box side, but that could be interpreted many ways. From the box there was at least a Spad, SE-5, Fokker DVII, Niuport and a Sopwith Camel for rubber power as well as the 'Spacer A-B' & 'Spacer 1/2A' and the indoor Featherette. We know they also issued some ex-Suydam railroad kits as well. From Bill Baker Jr - "California Model Company originated in Long Beach, Calif in the late 1940's or early 1950's. My grandparents, William (Bill) Loyal Baker and his wife, Ruth (Tripp) Baker were the founders. The company started out as primarily balsa based model aircraft but later, in the late 50's or early 60's, branched into the model RR craft kits and Cub Scout craft kits. They even had a balsa speed boat kit powered by a model airplane gas engine adapted to fit. When they retired, around 1968 or 1969, they sold the business and the "shop" in North Long Beach they built to house their business. I have many fond memories as a young child "working" with them in the shop, assembling kits. I have a few unbuilt kits today!"
AMT Ford Courier Minivan - Pickup Truck, 1/25, 2701
Plastic Model Kit, Box Condition: Exc
$38
1970s one and only issue. This model can be assembled as a stock pickup truck, custom truck or minivan. Nicely detailed with over 80 parts and features rolling chassis construction just like the real truck with full suspension, exhaust gas tank and more, detailed engine and compartment, removable hood, full interior, working tailgate, optional wheels, roll bar, minivan topper, optional bumper guard and more. Molded in white, clear, chrome and with rubber tires. The kit has never been started. The parts that were sealed at the factory are still sealed. The parts that were never sealed (chrome & clear) have been inventoried complete. Includes decals and instructions.
ESCI Sepecat Jaguar A, 1/48, SC-4036
Plastic Model Kit, Box Condition: Good
$20
Features optional position canopy and speed brakes, cockpit detail, external stores, ordnance and more. Includes decals for two French aircraft and paint guide. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
LS Mitsubishi A6M5 Type 52 Zeke Zero - Motorized, 1/72, 106-100
Plastic Model Kit, Box Condition: Exc+
$29
Classic early Japanese box art with a high quality LS model. It is engineered to be motorized with the battery in the stand. As was the practice, all of the hardware is included but the motor is not. Features moving rudder, wing flaps and ailerons, sliding canopy and retracting landing gear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Craft Master Water Wagon - Wagons of the Old West, 50114-350
Wood and Metal Model Kit, Box Condition: Sealed Mint
$69
Rare and still factory sealed. Authentic, large-scale model from high quality, die-cut California Redwood, Ponderosa Pine and other materials as required. Measures 7 inches long and 4 inches high when assembled. This excellent series contained several other kits, all done to the same (unlisted) scale - Covered Wagon, Log Wagon, Jerky Wagon, Mule Team, Horse Team, Ox Team, Jail Wagon, Yellowstone Wagon, Buckboard Wagon, Sheepherders Wagon, Ore Wagon, Conestoga Wagon, Milk Wagon, Chuck Wagon, Delivery Wagon, Dray Wagon, Stage Coach and Water Wagon. There was also a very early Red Rover Fire Engine Wagon in the same scale.
Aurora British SE-5 Scout, 1/48, 103-100
Plastic Model Kit, Box Condition: Sealed Exc+++
$49
1963 issue with Jo Kotula box art. Still factory sealed but the seal has split, and there is minor box wear on the center of the far left side.
Revell Grumman Martlet Mk V / FM-1 (F4F Wildcat) - Royal Navy or USS Core, 1/32, 4784
Plastic Model Kit, Box Condition: Exc
$44
Dated 1992 and includes a very large decal sheet with extensive stencils and markings for Royal Navy Martlet V, 1932 Squadron, NAS Englinton, June 1944 and Grumman FM-1 from VC-12 from the USS Core, Autumn 1943. Features detailed cockpit, sliding canopy, pilot figure, rotating wheels and props and removable cowl to show the Pratt and Whitney R-1830 engine. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
E&B Valley Railroad Co Single Or Double Deck Stock Car With Trucks - HO / HOn3 Narrow Gauge, 1/87, 018-3100
Plastic Model Kit, Box Condition: VG+
$32
Superb injection molded kit with plastic truck set and dummy couplers. Highly detailed with a large number of parts. While model aircraft mold makers and molding machine operators were claiming that you could not mold parts this fine, several model train companies, like E&B Valley, were busy proving them wrong. This is kit for the serious model railroader who demands prototype fidelity. Molded in black plastic. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Please note that these E&B kits did not come with decals.
Merlin Models Fokker E-V / D-VIII - German or Polish Air Force, 1/72, 16
Multimedia Model Kit, Box Condition: Good
$19
Limited edition kit with finely cast metal parts and details and injection molded main airframe parts. Includes decals for multiple versions. The kit has never been started. Internal factory sealed bag including decals and instructions.
Novo Techna Soviet Type D Series I Submarine, 1/400, K4004
Plastic Model Kit, Box Condition: Good
$10
Ex-Soviet Union kit that is very well molded for that time with very fine detail and hull drain holes. Full hull model measures 7.5 inches long when assembled and includes display stand and decals. The kit has never been started. The parts are still in the internal factory sealed bags, which is attached to cardstock that is folded in two. At times the factory workers had to get pretty creative because of a shortage of staples. Beyond staples, I have seen the bag of parts attached with tape, a clothing snap, a rivet or even sewn on with thread!