Plastic Model Kit, Box Condition: Exc+
Very nicely molded kit. Features decals for two squadrons, very fine raised panel lines and recessed control lines, very good cockpit and gear well detail, optional position canopies and crew of two. Never started. Factory sealed bag with decals and instructions. The T-2 was first flown in 1971 as Japan's first supersonic trainer. The design proved successful and served until replaced by the F-2 in 2006
Plastic Model Kit, Box Condition: Sealed NM
Limited edition injection molded kit. Well detailed. Features photoetched brass fret of parts, film instruments, color painting guide (on the back of the box) and full decals.
Metal Model Kit, Box Condition: Bagged
Includes two engines. Very highly detailed all-metal castings makes an excellent upgrade to your model. Superior in detail to plastic injection molded engines. Never used and complete.
Plastic Model Kit, Box Condition: Exc
Famous German Flying Boat of the 1930s. Dornier dreamed that this huge aircraft would become a trans-oceanic airliner. Passenger traveled in ocean-liner like luxury. A tour of South and North American was conducted, but orders never materialized due to excessive fuel consumption and a lack of power. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
1997 issue with decals for both aircraft. This is the final issue of this kit, modified from the older molds. Includes optional parts for F6 or F2A variants, drop tanks, Red Top and Firestreak missiles and a large, extensive decal sheet. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Good
Dated 1961. Large-scale, well detailed kit that can be flown rubber free flight, gas free flight, or converted to electric RC using modern servos and receivers. Features quality balsa die-cut parts and strip wood, die-cut plywood firewall, scale plastic wheels, plastic propeller, vacuform cowl, excellent full color decals, colored tissue and excellent full size plans. The model has not been started. Inventoried 100% complete with all parts, decals and instructions. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production.
Resin Model Kit, Box Condition: Fair
High definition resin molded kit. Complete with all parts and instructions with painting guide. Kit did not come with decals.
Plastic Model Kit, Box Condition: Sealed Exc++
Still factory sealed. Dated 1977. Features full racing chassis, roll cage, race interior, Chevy racing V-8 engine, opening hood, one piece body, Pepsi decals and much more.
Wood and Metal Model Kit, Box Condition: VG+
Solid wooden model from the 1930s. Features hardwood 3D machine carved fuselage, profile cut wings, horizontal and vertical stabilizers, excellent turned hardwood cowl, printwood prop, a sealed envelope of small parts and excellent plans that include 3 elevation drawings and many cross sections for templates. Never started and complete, even include factory packing tissue paper. This model is rare in that it is from Gordon Christoph's Aircraft Model Company. This company was founded in the early 1930s. Jack Mair, a former Comet Model Airplane & Supply Co. salesman bought the company in the early 1940s and renamed it Maircraft. Mair continued with the same logo and 1/48 scale and went on to make one of the rarest and valuable 1/48 scale wooden kits ever - the Maircraft DC-3. The company went out of business just as production began on the DC-3, which was in 1947.
Wood Model Kit, Box Condition: Exc
Purchased new on April 22, 1972 at a local Kmart in Cleveland, OH. Large scale issue for rubber or gas free flight, or easily converted to RC using today's tiny and light servos and receivers. Box art is by Locher, who did a great deal of the Monogram box artwork also. Kit features traditional wood/tissue construction with all die cut parts, 'Tube-O-Matic' fuselage construction and 'Rugged Super X Simplified Non-Warping Wing' construction, a very large and colorful insignia sheet, detailed full size plans, building instructions, wheels, hardware, tissue and propeller. Never started and inventoried complete. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
Plastic Model Kit, Box Condition: Sealed Exc
Still factory sealed. Has markings for two aircraft - the 1937 Paris to Tokyo racer and the French Air Force 8 Escadre 1938. Very nicely molded with recessed control surfaces and fine raised panel lines. This highly advanced aircraft first appeared at the XIV Paris Air Show in 1934 . It was used successfully for many record attempts, and was pressed into service for WWII also.
Plastic Model Kit, Box Condition: Fair
Has parts to build both variants. The kit has never been started. Internal factory sealed bag including decals and instructions.
Plastic Model Kit, Box Condition: Exc+++
Colorful Craftmaster artwork unique to this issue. One of two different Craftmaster issues. Kit is well detailed and includes movable control surfaces, rotating props and wheels, optional position cargo doors, two sitting pilots, a stand pilot and a paratrooper. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good++
Big kit that is features all recessed panel lines, 'good' cockpit with four crew stations, linked wings that swing, detailed gear wells, optional position crew boarding ladder and KH-22 (AS-4) Kitchen supersonic missile with semi-recessed mounting. NOTE: this kit has minor and neat assembly. The cockpit has been built, details painted and decals applied to it. Quality of assembly and paint is 'very good++' and there is no other assembly or paint on the model. Inventoried complete with all parts, decals and instructions. NOTE: there are extra parts from the Tu-22M Backfire B kit, which means you can block out the 'Kitchen' hole on the underside and have a 'clean' Backfire or equip it with two big wing-mounted missiles for this version.
Plastic Model Kit, Box Condition: VG
Measures 14.5" long, 5" wide and 5.875" high. Dimensions given are interior dimensions. Does NOT include base; contains five clear panels only. All five clear sides are in excellent condition and in plastic bags for protection. Includes hardware and instructions.
Vacuform Model Kit, Box Condition: VG
Nicely molded basic vacuform kit of this interesting aircraft. The J-10 was an all metal aircraft and was actually a modified J-8 (CL-1) ground attack fighter. 47 J-10s were build as a joint venture between Junkers and Fokker. This kit has not been started and has been inventoried complete with all parts. Not recommended for builders who are not experienced with vacuform kits.
Plastic Model Kit, Box Condition: Exc-
Limited run injectiton molded kit. Includes decals and clear parts. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions.
Plastic Model Kit, Box Condition: Fair
Many Frog molds made their way to the ex-Soviet Union, probably in the 1960s. Of them, this one is perhaps the most interesting. This kit represented quite a research problem, but Mark Zandy has provided information from his Soviet kit collection. The manufacture is Jaroslavl Chemical Plant "Lutch" (Jaroslavl is a town on Volga river). "Lutch" can be translated as "Ray", but "Sunbeam" is a better interpretation. Rovex sent this mold to the USSR in 1977 in an agreement between Dunbee-Combex-Marx and Novoexport, but the Bristol Britannia didn't receive the Novo kit number and this kit had been produced only for the Russian market. The price was 2 rubles, which I am told was expensive at the time. The number on the box OCT 17-296-75 refers to the number of an industrial standard for plastic toys production that was established in 1975. The box states "assembly kit of a transport plane" and it is clearly in USSR military markings. The scale is stated as 1/72, which is incorrect. Inside the box is the Frog model of the Britannia, which is 1/96. What the Soviets were doing with a model of the Britannia in Soviet military markings is unknown to me. There are no instructions or decals, but it was easy to determine that the kit is missing one propeller retainer (easy to make or can be left out as it does not show) and is missing four propeller blades. The kit also has a clear windshield and full landing gear, gear doors, etc. The kit has never been started. "Lutch" received 4 ex-Frog molds. For the domestic market kits were numbered: No. 196 -- Hawker Tempest V (bagged), No. 197 -- P-47D-25 Thunderbolt (bagged), No. ??? -- Bleriot XI (bagged) , No. 214 -- Bristol Britannia (you can see this number on the box: Article Jr 085 -- 1 -- 214). At least two different boxes were issued for the Britannia. Dusty Rhodes may have an answer as to how a Britannia could even come close to wearing a Soviet Star insignia - "...you pose a very good question about why anyone would have thought of issuing the kit with Soviet markings. From Woodley, Bristol Britannia (2002), and some online sources, I now think there may be a vaguely sensible reason. Bristol sold four Britannia transportsto Cuba in 1959, under an exception to the US embargo. The state airline Cubana ran these until around 1975, including leases to Czechoslovakia. Some of the aircraft were used to transport Cuban troops and Soviet equipment to communist insurgents in Africa. Castro apparently thought the use of British a/c was a big to do; Woodley (p. 90) describes an instance in which Fidel flew around Cuba in one of the ships and making a radio broadcast. I found no evidence that Soviet military or other markings were even temporarily applied, but as a result of all this, it might not have seemed unreasonable to someone to use red stars on the box art for this kit."
Plastic Model Kit, Box Condition: Sealed VG++
Still factory sealed with an very good condition header and the T3 logo. From the 1960s. Has decals for both version.
Plastic Model Kit, Box Condition: Exc
From ESCI molds. Very nicely molded small scale waterline ship kit that is ideal for war gaming. Features detailed hull, deck and superstructure, separately molded turrets, mast, some superstructure parts and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.