Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

  Lindberg Model Kits

Lindberg North American F-86 Sabre Jet, 1/48, R505-98

Plastic Model Kit,   Box Condition: Sealed Good-

$28   

Still factory sealed. 'Boy Craft' Cellovision issue from the late 1950s. Box has the yellow oval 'Lindberg' logo on top hanging tab. Dramatic Ray Gaedke box artwork. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg Vega Winnie Mae / Ju-87 Stuka / F6F Hellcat Gift Set, 1/48, 100-298

Plastic Model Kit,   Box Condition: Sealed VG

$345   

Very rare factory gift set consists of a sleeve and three kits. The sleeve and kits are still factory tape sealed; the kits have never been removed from the sleeve or opened. The kits have general wear, with the F6F having the most wear in the lower left corner.

Lindberg X-3 Stiletto / F-88 Voodoo / F-86 Sabre Gift Set, 1/48

Plastic Model Kit,   Box Condition: Exc++

$295   

Very rare 1950s triple gift set for the advanced collector. All boxes have the Ray Gaedke illustrations and are in Exc++ to NM- or condition. The cardboard gift sleeve is in Exc++ condition. The gift set was neatly opened at the back. Since it was opened, I did an inventory on all kits. They have never been started. All are 100% complete with all parts, decals and instructions.

Lindberg HMS King George V, 1/750, 783-100

Plastic Model Kit,   Box Condition: Exc+

$22   

1967 hardbox issue in excellent condition. Full hull, small scale kit with Tom Morgan artwork. 12 inches long when assembled. Features triple propeller and twin rudder detail, separately molded main + secondary turrets and superstructure and some other details. This kit has never been started. Inventoried 100% complete with all parts and instructions.

Lindberg USCG Cape Gull (WPB-95304) - US Coast Guard Patrol Boat CG-95304 - Motorized, 1/80, 707M-198

Plastic Model Kit,   Box Condition: Exc

$155   

Rare. Late 1950s hardbox issue with Ray Gaedke artwork. Large 1/80 scale kit of this beautiful ship. Very highly detailed for it's time - still a fine model today. Includes all parts for motorizing. Could be easily made RC with today's small systems. Features finely engraved hull with raised panel lines, detailed superstructure with ammo boxes, pump case, life rafts and rings, searchlights, horn , DF loop antenna, clear windows, ships wheel and even tiny engine speed control levers. Weapons include 20mm gun with magazine and shield, two angled Mk20 boxes, depth charges and racks and two hedge-hog launchers with four hedgehogs each. Deck fittings are complete with bitts, hatches, towline bitt and stops, staffs, vents, anchor, lifeboat, mast with radar antenna and platform light and stanchions that you can easily rig to create a railing. Includes a nice display stand. The kit has never been started. NOTE: missing one of two tiny windlass crank arms. Can be made from wire or you can resin cast the remaining one. Otherwise inventoried with all other parts including decals, flags and instructions. The 95' U.S. Coast Guard Cutter 95304, a Coastal Patrol Boat was one of 36 boats built between 1953 and 1959. These cutters were stationed all along the U.S. coasts and performed Search and Rescue missions, and Port Security duty. Nine of the vessels were transferred to South Korea. The remaining vessels remained on active Coast Guard duty until 1986 to 1990. They were replaced with a succession of 82', 87' and 110' Patrol Boats.

Lindberg Convair 880 TWA Jetliner, 1/189, 452-49

Plastic Model Kit,   Box Condition: Sealed VG

$65   

Still factory sealed. Rare late 1950s issue. This is the only issue with the classic Ray Gaedke box artwork. Has very fine raised panel detail and can be built wheels up or down. Includes full TWA decals. The box would grade better than 'sealed vg' but the side panels have creasing.

Lindberg Convair 880 TWA Jetliner, 1/189, 409-50

Plastic Model Kit,   Box Condition: VG

$28   

1960s hardbox issue. Can be built wheels up or down and comes with full, nicely done TWA decals and a display stand. Very fine raised panel detail. Box artwork is by Tom Morgan, who did most if not all of this issue of the Lindberg small airliners. The kit has never been started. Inventoried 100% complete including decals and instructions.

Lindberg North American F-100 Super Sabre, 1/48, 528-98

Plastic Model Kit,   Box Condition: VG

$65   

1950s hardbox issue with incredible Ray Gaedke artwork. Large 1/48 scale F-100 with movable rudder, elevators and ailerons, detailed ejection seat and pilot, full jet engine detail and opening engine access hatch and a load-out of two drop tanks and 8 missiles. Includes colorful decals for the box art aircraft. The kit has never been started. Inventoried 100% complete including decals and instructions. NOTE: the backing paper of the decals has damage on a small area where it was once stuck to the instructions. The actual transfers have no damage. There is a corresponding area on the instructions as well.

Lindberg Grumman F6F-5 Hellcat - (F6F5), 1/72, 484-60

Plastic Model Kit,   Box Condition: Good++

$22   

1967 hardbox issue with artwork by Lacina. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg Republic P-47N Thunderbolt, 1/48, 511

Plastic Model Kit,   Box Condition: Exc++

$89   

Rare 1st issue small hardbox from 1952 in 'excellent ++' condition. Has like-new color and gloss, four solid corners, light wear as shown, circle logo and Ray Gaedke artwork. The box almost seems to small for this large 1/48 scale kit - and it is a tight fit. Molded in the correct early light gloss gray and clear. There are panel lines but very minimal rivet detail; later issues had heavy rivet detail added. Never started. Inventoried 100% complete with all parts, decals and instructions. This kit started as a basic 1/48 scale model with full landing gear, rockets and bombs. Surface detail was minimal Lindberg modified it in the mid 1950s with extensive rivet detail. in the late 1950s, they modified it again to a motorized version with the batteries in the stand and a kit electric motor in the nose. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg Blitz - 18 inch Wingspan Rubber Powered Plastic Flying Airplane Model, 926-100

Vacuform Model Kit,   Box Condition: Sealed NM

$125   

Still factory sealed. Very rare. Fantastic artwork by Ray Gaedke. The box is in exceptional near mint condition. In the late 1950s/early 1960s, Lindberg came out with a complete line of vacuformed rubber powered flying models. The kits were all prepainted, had large wingspans and were quite attractive for flying models. They also included the rubber band, spring wire landing gear and injection molded wheels, propeller and bushing. The instructions are on the back along with a detailed trim/adjustment guide for flying.

Lindberg Convair 880 Airliner - TWA or MEA (Middle East Airlines Lebanon) - Mexican Issue, 1/189, 409

Plastic Model Kit,   Box Condition: Sealed Exc++

$54   

Still factory sealed. Rare Mexican-Lindberg issue that includes colorful TWA and MEA decals. Can be built wheels up or down. Very fine raised panel detail. Box artwork is by Tom Morgan, who did most if not all of this issue of the Lindberg small airliners.

Lindberg Cadet - Rubber Powered Plastic Flying Airplane Model, 925-100

Vacuform Model Kit,   Box Condition: NM

$125   

Very rare. Fantastic artwork by Ray Gaedke. The box is in exceptional near mint condition. In the late 1950s/early 1960s, Lindberg came out with a complete line of vacuformed rubber powered flying models. The kits were all prepainted, had large wingspans and were quite attractive for flying models. They also included the rubber band, spring wire landing gear and injection molded wheels, propeller and bushing. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including instructions, which are on the back along with an adjustment guide for flying.

Lindberg Convair 880 TWA Jetliner, 1/189, 409-60

Plastic Model Kit,   Box Condition: Sealed Mint

$48   

Still factory sealed but the seal has splits. Late 1960s kit. Can be built wheels up or down and comes with full TWA decals and a display stand. Very fine raised panel detail. Box artwork is by Tom Morgan, who did most if not all of this issue of the Lindberg small airliners.

Lindberg Benny Howard's 'Pete' - 1930s Thompson Trophy Racer - One Piece Box Issue, 1/48, 25-301

Plastic Model Kit,   Box Condition: Exc++

$145   

Very rare kit for the advanced collector. First Lindberg issue in a one piece box. Dates from the early 1950s. Molded in unique gloss light green and includes the early unique 'Circle' two piece stand.. The box is in excellent condition and carries the circular Lindberg first logo. The instructions are on the back and Lindberg did not issue the kit with decals. The kit has never been started and is complete.

Lindberg Knight Twister - One Piece Box Issue, 1/48, 25-304

Plastic Model Kit,   Box Condition: Exc+++

$145   

Very rare kit for the advanced collector. First Lindberg issue in a one piece box. Dates from the early 1950s. Molded in unique gloss light green and includes the early unique 'Circle' two piece stand.. The box is in excellent condition and carries the circular Lindberg first logo. The instructions are on the back and Lindberg did not issue the kit with decals. The kit has never been started and is complete.

Lindberg Dornier Do-335 Arrow, 1/72, 438-60

Plastic Model Kit,   Box Condition: Sealed Mint

$29   

Still factory sealed. 1966 hardbox issue with Tom Morgan boxart.

Lindberg Benny Howard's 'Pete' - 1930s Thompson Trophy Racer - Cellovision Issue, 1/48, 419-29

Plastic Model Kit,   Box Condition: Sealed VG-

$52   

Still factory sealed. Late 1950s Cellovision issue with a clear panel on the front and a color trading card on the back. Classic artwork by Ray Gaedke. Larger 1/48 scale kit of this famous racer designed by Benny Howard.

Lindberg Grumman F6F-5 Hellcat - (F6F5), 1/72, 484-60

Plastic Model Kit,   Box Condition: Exc++

$28   

1967 hardbox issue with artwork by Lacina. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.

Lindberg Dornier Do-335 Arrow, 1/72, 438-50

Plastic Model Kit,   Box Condition: NM

$26   

1966 hardbox issue with Tom Morgan boxart. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.