LF Models 1/72 Curtiss R2C-1 - 1923 Pulitzer Trophy Winner, 7255

0 item(s) in your cart.

  «Go Back

Selling your kits?

LF Models 1/72 Curtiss R2C-1 - 1923 Pulitzer Trophy Winner, 7255 plastic model kit

1/72 7255 LF Models Curtiss R2C-1 - 1923 Pulitzer Trophy Winner

Resin Model Kit,   Box Condition: VG+

Excellent limited edition kit. Features main airframe parts in professional grade castings, good interior detail, printed instruments, painting guide and full decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. From thisdayinaviation.com: Two R2C-1 Racers was built for the U.S. Navy by the Curtiss Aeroplane and Motor Company of Hammondsport, New York, and were assigned serial numbers A6691 and A6692. They were single-place, single-engine biplanes with a wooden monocoque fuselage and fabric-covered wings. Curtiss had made every effort to reduce aerodynamic drag, including the use of surface radiators on the wings to cool the engine. The airplane was 19 feet, 3 inches (5.867 meters) long with a wingspan of 22 feet (6.706 meters). The biplane had an empty weight of 1,692 pounds (767 kilograms) and gross weight of 2,112.3 pounds (958.1 kilograms). The R2C-1 Racers were powered by a revolutionary 1,209.610-cubic-inch-displacement (19.813 liter) water-cooled, normally-aspirated Curtiss D-12A dual overhead camshaft (DOHC) 60° V-12 engine with four valves per cylinder. The cylinders and water jackets were cast as a monoblock and a drop-forged crankshaft with seven main bearings was used. A Stromberg NA-75 carburetor supplied the air/fuel mixture. The engine turned a two-bladed forged aluminum propeller designed by Sylvanus A. Reed. This fixed-pitch propeller had very thin blades which allowed it to turn at high speed without adverse sonic effects. The D-12A drove this propeller without gear reduction (direct drive, hence the “D” in the engine’s designation). The D-12A was specifically modified as a racing engine and did not have a power rating for normal service, however, it nominally produced 507 horsepower, with a 520 horsepower maximum. It was capable of operating at 2,500 r.p.m. The Curtiss D-12 was 56¾ inches (1.441 meters) long, 28¼ inches (0.718 meters) wide and 34¾ inches (0.882 meters) high. It weighed 678.25 pounds (307.65 kilograms).

This item has been sold.
Click here to return to the main page.