Balsa Model Plane Kits

Search:

Balsa Model Plane Kits for sale

StromBecker Chance Vought F7U Cutlass, C49-89

Wood Model Kit, Box Condition: VG

$62

Beautiful kit from the 1950s made of quality hardwood - no balsa. The carving is done to the final shape. When complete it makes an impressive model and comes with a unique display stand. Features all carved and smooth wood parts, clear plastic canopy, full color decals, glue, wood filler, sandpaper and special display stand. Never started. Inventoried complete with all parts and plans. Before plastic kits were introduced, Strombecker was famous as the premier hardwood preshaped model manufacturer. In the 1940s and 1950s, Strombecker kits were flawlessly engineered but not inexpensive. All wooden parts are hardwood and are precarved to shape - you only had to glue, sand and paint to finish them.

StromBecker Swift 125 Sea Plane, C-40

Wood Model Kit, Box Condition: Exc

$95

StromBecker was famous for this line of precarved hardwood and plastic kits. The carving is done to the final shape and when completed it makes an impressive desk top display. Features fully carved fuselage, wings with airfoil, floats, die-cut tail feathers, small detail parts in the original envelope, sealed envelopes of Casein Glue and Wood Filler, sandpaper, detailed instructions and amazing 'near mint' condition full color decals. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Western Aircraft Mfg Co Dragon-Fly Miniature Airplane - 14 Inch Wingspan Prefabricated Flying Model

Wood Model Kit, Box Condition: VG

$195

Very rare. 1932 early RTF stick-and-tissue model from Western Aircraft Manufacturing Company, Los Angeles California. The box and kit are both in investment-grade 'near mint' condition. I had seen these in 1930s magazines but did not know if any were left. All of the pieces of this aircraft have been factory assembled and simply need to be put together with the supplied rubber bands. The fuselage/rubber stick is cut, finished & painted and has both metal rubber motor clips installed. The wing, vertical and horizontal stabilizers are fully assembled of light-weight wood with the tissue applied. The horizontal stabilizer and wing have the correct airfoil camber built in, and the wing has the USA national insignia applied. There is a perfectly carved wooden propeller, metal rubber hook/propeller shaft, two fully finished wheels, other wood parts cut to size and ready to install. Even the original rubber bands used for installing sub-assembles together are present and still intact on the motor stick. The rubber band motor is present but very brittle and broken into many sections. There is an excellent set of front and back illustrated instructions that cover assembly, how to fly and adjust the aircraft and how to maintain it. Please note, this model must be shipped insured.

Supreme B-24 Liberator - 7 Inch Wingspan Solid Wood Model - Steve Patti Company

Wood Model Kit, Box Condition: VG

$22

Very rare. This is a solid wood model kit from the 1940s. It features two sheets of printwood, blocks and balsa stock, sandpaper, high quality 3 view plans with templates and some text instructions. Never used and complete. Supreme Scale Models were made by the Steve Patti Company in Milwaukee, Wisconsin. In the pre-plastic days they produced an extensive line of solid scale models and a large number of flying stick-and-tissue models as well; they were called 'Supreme Flyers.'

Supreme Martin B-26 Marauder - 7 Inch Wingspan Solid Wood Model - Steve Patti Company

Wood Model Kit, Box Condition: Exc

$20

Very rare. This is a solid wood model kit from the 1940s. It features two sheets of printwood, blocks and balsa stock, color insignia, fully formed wood wheels, sandpaper, high quality plans with templates for the fuselage and wings, some text instructions and even painting tips. Never used and complete. Supreme Scale Models were made by the Steve Patti Company in Milwaukee, Wisconsin. In the pre-plastic days they produced an extensive line of solid scale models and a large number of flying stick-and-tissue models called 'Supreme Flyers.'

True Build P-39 Airacobra - Wood Model Kit - Joe Ott, 1/48, 603

Wood Model Kit, Box Condition: Fair+

$22

Very rare and dated 1944. The 'True Build' series was Joe Ott's answer to scale solid model construction. This model is 1/48 scale and features bread-and-butter (laminated) construction, four big die-cut hardwood sheets and very large full-size plans that include three views of the model, many detail drawings, templates and very extensive text instructions. Never started. All the parts are still in the original die-cut sheets (unpunched) with all paperwork.

StromBecker Chance Vought F7U Cutlass, C49-89

Wood Model Kit, Box Condition: Good

$48

Beautiful kit from the 1950s made of quality Western Pine hardwood - no balsa. The carving is done to the final shape and when completed it makes an impressive model. Features all carved and smooth wooden parts, clear plastic canopy, full color decals, glue, sandpaper and special hardwood 'teardrop' shaped display stand. Never started. Inventoried complete with all parts and plans. Before plastic kits were introduced, Strombecker was famous as the premier hardwood preshaped model manufacturer. In the 1940s and 1950s, Strombecker kits were flawlessly engineered but not inexpensive. All wooden parts are hardwood and are precarved to shape - you only had to glue, sand and paint to finish them.

StromBecker North American FJ-2 Fury, C-46

Wood Model Kit, Box Condition: Good+

$44

Beautiful kit from the 1950s made of quality Western Pine hardwood - no balsa. The carving is done to the final shape and when completed it makes an impressive model. Features all carved and smooth wood parts, clear plastic canopy, full color decals, glue, sandpaper and a special hardwood 'teardrop' shaped display stand with a preformed 'flight wire' model holder. Never started. Inventoried complete with all parts and plans. Before plastic kits were introduced, Strombecker was famous as the premier hardwood preshaped model manufacturer. In the 1940s and 1950s, Strombecker kits were flawlessly engineered but not inexpensive. All wooden parts are hardwood and are precarved to shape - you only had to glue, sand and paint to finish them.

Comet Taylorcraft - 54 inch Wingspan For R/C or Free Flight, 3505

Wood Model Kit, Box Condition: VG

$72

This is a very large scale kit from the late 1960s. It has a 54 inch wingspan and can be built for rubber or gas free flight or R/C (radio control). This is a reissue of a much older Comet kit and features traditional wood/tissue construction, high-quality balsa pre-cut stringers, balsa printwood, detailed full size plans, building instructions, wheels, tissue and propeller. The model has not been started. Inventoried 100% complete with all parts and instructions. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Comet Republic P-47D Thunderbolt - 24 Inch Wingspan Flying Aircraft, 3502

Wood Model Kit, Box Condition: Sealed VG+

$52

Still factory sealed and rare in this condition. 1970s large scale issue for rubber or gas free flight or easily converted to R/C using today's minidature & light weight receivers and servos. This kit features traditional 'stick & tissue' construction, quality print wood, factory-cut spars and stringers, insignia, fully formed wheels, hardware as required, propeller, covering tissue and detailed full size plans with building instructions. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

Flyline Models Curtiss SO3C-1 Seamew - 23 inch Wingspan for RC / Free Flight or Static Display, 117

Wood Model Kit, Box Condition: Sealed Mint

$34

Still factory sealed but the seal has split from age. Made for rubber free flight, but easily converted to electric RC with today's light and tiny servos and receivers. Flyline Models was a manufacturer out of Fairfax, Virginia USA. The models are known for their high quality. The kit contains full size detailed plans, instructions, high quality printed balsa sheets, pre-cut spars and stringers, decals, plastic prop and vacuform spinner, clear window material, covering tissue, hardware and more.

Monogram Little Air Force Assortment Gift Set Speedee-Bilt F-84 And Speedee-Bilt F-51 And Superkit F-51 (P-51) And Superkit F-84

Wood Model Kit, Box Condition: Good++

$695

Very rare 1950s gift set. Long before injection molded kit were mass produced in the USA, Monogram created what are widely considered the finest pre-fabricated wooden kits with plastic details. The Speedee-Bilt series were flying models with pre-painted and cut wooden parts with plastic props, cowls, pilots, etc. The Superkits were smaller static models with precarved wooden parts and many plastic details. The kits themselves are rare today, but the gift set is very rare. Monogram issued very few gift sets for injection kits, and even fewer in the early 1950s for the wooden kits. The gift set consists of a special 'Christmas' box with a tray and lift-off top with a cello window. This one contains 2 Superkits (F-84 Thunderjet and F-51 Mustang) and 2 Speedee-Bilts (also the F-84 and F-51). The outer box is intact with the original cello and is in 'very good' displayable condition but is not perfect. It has edge wear, general wear, light staining (visible at the upper left) and two closed split corners. The four kits inside are in mint boxes and have never started. Each is 100% inventoried complete with all parts,decals and instructions present.

Strombecker Lockheed F-94 Starfire - Woodline Issue, G-43

Wood and Plastic Model Kit, Box Condition: VG

$44

Strombecker was famous for this line of precarved hardwood and plastic kits. All parts are made to shape, including the fuselage, which made these kits easy to assembly and finish. The scale is not listed but has roughly a 6.5 inch wingspan when completed. This kit also includes a clear injection molded canopy, wooden base, wire support, color decals, glue and sandpaper and a stand. When complete it makes an impressive desk top display. Never started. All parts are still in the factory sealed internal bag and includes instructions.

StromBecker Chance Vought F7U Cutlass, C49-89

Wood Model Kit, Box Condition: Good+

$54

StromBecker Douglas D-558-2 Skyrocket - Bagged - (D5582), G42

Wood Model Kit, Box Condition: Good+

$25

StromBecker was famous for this line of precarved hardwood and plastic kits. The carving is done to the final shape so all of the hard work is done; just sand and assembly. When complete it makes an impressive desk top display. This one includes beautiful hardwood parts, a clear plastic canopy, full decals in 'excellent' condition as shown, sandpaper, sanding stick and photocopied instructions. The kit has never been started. It is either still in the factory sealed bag or inventoried complete with all parts with decals and instructions.

Supreme Bell Airacomet P-59 - 7 Inch Wingspan Solid Wood Model - Steve Patti Company

Wood Model Kit, Box Condition: VG

$22

Very rare. This is a solid wood model kit from the 1940s. It features two sheets of printwood, blocks and balsa stock, cardstock landing gear doors, color insignia, fully formed wood wheels, sandpaper, high quality plans with templates and some text instructions. Never used and complete. Supreme Scale Models were made by the Steve Patti Company in Milwaukee, Wisconsin. In the pre-plastic days they produced an extensive line of solid scale models and a large number of flying stick-and-tissue models as well; they were called 'Supreme Flyers.'

Contest Craft So-Lo Class B Stunt Plane - 22 Inch Wingspan Flying Aircraft

Wood Model Kit, Box Condition: VG

$74

Very rare model from 1949. Highly prefabricated and robust control line model from the "Contest Craft Company." Features high quality balsa parts that are all either factory cut to shape or die-cut, covering material, landing gear wire, full size plans and detailed instructions. This kit has been inventoried complete but NOTE: it has minor and 'professional' quality assembly. The center core of the fuselage (a flat assembly) is built. There is no other assembly. Thanks to Dusty Rhodes, we now know a little bit more about Contest Craft. Mr. Richard W. Backora registered the company name in 1949 and it appears that this model was one of his designs. Mr. Backora was born in New York, NY in 1924. He was a WWII Navy veteran and also served in the US Marine Corps. He was an Armament Equipment Branch Head for the Naval Air Systems Command and retired after 28 years of government service. He then spent 15 years in the private sector as a staff and project engineer with Thiebolt Aircraft, Republic Aviation and Melpar, Inc. Mr. Backora was very active in his local community in Church and secular organizations. He was also a member of the AMA (Academy of Model Aeronautics) and the Lewes R/C Club. Although no address is given for the manufacturer, the instructions state that you should ask your hobby dealer for other Contest Craft Company kits.

Competition Models Inc Starduster 600 - 61 Inch Wingspan Gas Powered Free Flight Model

Wood Model Kit, Box Condition: VG

$110

This large model is 35.5" long and has a 71" wingspan. This is one of the famous Sal Taibi's National award winning designs for use with 'hot' engines .15 to .29 displacement. Sal was one of the early 'Kings Of Gas Free Flight' and a very gifted designer. Feature high quality balsa and plywood parts, spar and strip wood, metal stock as required, aluminum motor mount, hardware and excellent full size plans. Never started and inside it is in factory-new condition. The small parts are still in the factory sealed clear bag; the other parts have been inventoried complete with the plans. NOTE: this kit was shipped in the very sturdy box shown. Unless you specify otherwise, we will send it wrapped in brown paper. If you wish to have it boxed, extra postage will apply. Designed for 'Sniffing Thermals,' the honored pastime of a generation of model enthusiasts. Flying model aircraft predated powered flight; however, balsa wood and printwood were not introduced until the early 1930s and the hobby took off, as well as the hunt for thermals. Gas flight began in the early 1930s, and powered models (most all driven by Brown engines) took home so many awards that they were forever separated in competition from rubber powered models. Design of gas models was tricky since RC (radio control) models could not yet be applied to the mass market; so a gas model had to not only fly and climb under power, but then glide sufficiently - all in a stable fashion and without any operator inputs once the airplane took off.

Maircraft Boeing F4B-4 - Solid Wood Model Airplane - (F4B4), 1/48, S16

Wood Model Kit, Box Condition: Good++

$20

Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps and templates, 2D cut fuselage and wings, other wooden parts, a factory-sealed small envelope of details and full color decals by Walthers! (Usually it was just a cut-out insignia sheet). The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including instructions.

Maircraft Curtiss Hawk P-6E - Solid Wood Model Airplane, 1/48, S15

Wood Model Kit, Box Condition: Good

$20

Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps, all hardwood parts (very unusual; normally they were balsa), full color insignia sheet, 3D cut fuselage, profile cut wings and tail feathers, printwood and a small bag of sealed details. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including insignia and plans/instructions.